• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.237-240
• /
• 2000

본 연구에서는 한국 동해 대륙붕 해역에서의 주요 해양현상인 수직 수온구조의 단기변동, 수온전선, 그리고 내부파의 변동을 분석하고 이들 변화에 따른 음파의 음장변화를 고찰하였다. 한국 동해항 근해에서 수온의 수직적 변화는 계절적인 변화 이외에 약 2주간의 짧은 기간에도 매우 극적인 변화가 존재함이 실측자료를 통해 밝혀졌다. 1999년 관측된 CTD 자료를 바탕으로 음장 변화를 살펴본 결과 주파수 1kHz, 음원수심 $30{\cal}m$ 인 경우 수신기 수심에 따라 최소 3dB, 최대 10dB까지 차이를 가져올 수 있음을 알 수 있었다. 한국 동해에서 연안과 외해 사이에는 수온전선이 매우 자주 발달하며 여름에 가장 강한 것으로 알려져 있다. 동해항 근해에는 대표적인 수괴인 대마난류수와 북한한류수가 공존하며 이들의 상대적인 세력 변화 때문에 수은(음속)이 거리에 따라 급격하게 변하는 수온전선이 발달할 수 있다. 저주파수 대역 (200Hz)에 대한 간단한 시뮬레이션 결과는 수온전선이 정상적인 분포에 비해서 거리에 따라 7dB 정도의 큰 전파손실을 초래할 수 있음을 보인다. 한국 동해 연안에도 내부파가 존재한다는 사실이 최근 3년간의 연구 결과 밝혀졌다. 내부파는 외해에서 발생하여 대륙단을 거쳐 대륙붕으로 진행해 오면서 내부파 군 (Packets)으로 분산된다. 수직적 변화가 전체 수층의 $14\%$를 차지하는 간단한 형태의 내부파를 가정하여 음장변화를 시물레이션 한 결과 주파수 1 kHz, 음원수심 $20{\cal}m$인 경우 내부파는 수렴구역 형성을 현저하게 방해하여 최대 5dB까지의 차이를 유발하였다. 추후 이에 대한 연구는 내부파 전체의 시,공간적 분포 특성이 구체적으로 규명되면 보다 정확한 음장변화 추정이 이뤄져야 할 것으로 보인다. 또한 내부파와 음파의 상대적인 진행 방향에 따라 음장변화가 크게 다를 것이 예상되므로 이를 규명하기 위해서는 궁극적으로 3차원적인 음장분포 연구가 필요하다. 음향센서를 해저면에 매설할 경우 수충의 수온변화와 센서 주변의 수온변화 사이에는 어느 정도의 시간지연이 존재하게 되므로 이에 대한 영향을 규명하는 것도 센서의 성능예측을 위해서 필요하리라 사료된다.

• Journal of the Microelectronics and Packaging Society
• /
• v.10 no.4
• /
• pp.9-14
• /
• 2003

The new optical link receiver with data transfer rate higher than 10Mbps at the supply voltage of 1.8V was designed and fabricated using bipolar technology. The fabricated IC showed the dissipation current of 4.6mA under high level input voltage of 1.5V. The high level output voltage($V_{OH}$) and the low level output voltage($V_{OL}$) were 1.15V and 0V, respectively, for a given 10 Mbps signal which has duty ratio of 50%, $V_{IL}$(low level input voltage) of 0.5V, and $V_{IH}$(high level input voltage) of 1.5V, The duty ratio of output waveform was 52.6%. The rising time(t$_{r}$) and the falling time(t$_{f}$) were 9.5ns and 6.8ns, respectively. The propagation delay difference($t_{PHC}-t_{PLH}$) and the jitter($t_j$) were 11.7ns and 4.3ns, respectively.y.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.2
• /
• pp.60-67
• /
• 2010

In the ubiquitous age, applications of wireless personal area network (WPAN) technology using LEDs are in progress. However, visible light communications (VLC) using the LEDs have weakness which deteriorate performance of communication because of multi-path fading that occurs propagation delay by interior walls or other things in indoor environments. In this paper, orthogonal frequency division multiplexing (OFDM) scheme is adapted to decrease multi-path fading and multi-path dispersion and to provide high speed data transmission. Besides, to reduce information losses caused by optical noise (incandescent lamps, fluorescent lamps, sunbeam etc.) also proposed channel coding using turbo codes. The encoding and decoding of the proposed system is described, and simulation results are analyzed. We can know that performance of proposed system is increased about 4 [dB] through the simulation results. Also, when the system take doppler effect, the system performance worsened.

• Journal of Sensor Science and Technology
• /
• v.8 no.1
• /
• pp.1-9
• /
• 1999

A study has been made on the fabrication of a dual mode(a longitudinal and shear mode) ultrasonic sensor using a single PZT piezoelectric ceramic element. We investigated the mechanism of the dual mode sensor that generated both of the longitudinal and the shear waves simultaneously with the single PZT element. Through the analysis of analytic wave propagation equations, all the possible crystal cuts have been examined to determine appropriate Euler transformation angles for efficient excitations of the dual modes. We studied the performance of a PZT element as a function of its rotation angle so that its efficiency is optimized to excite the two waves of equal strength. Experimental examination of the waveform on a delay line(STS303) setup confirms that the ultrasonic sensor can transmit and detect both longitudinal and shear waves simultaneously.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.5B
• /
• pp.539-548
• /
• 2011

We propose an efficient cooperative ARQ (Automatic Repeat reQuest) scheme for single-hop and multi-hop underwater acoustic communications, in which cooperative nodes are used to provide more reliable alternative paths for a specific source-to-destination connection. This alternative path has higher channel quality than that of the direct source-destination path. In addition, during a packet-relay through multiple hops, the typical acknowledgement (ACK) signal is replaced with overhearing data packet returned back from the next hop. The usage of overhearing as an ACK improves the system performance. In this paper, we evaluate the proposed scheme by comparing it with a conventional S&W ARQ in terms of throughput efficiency. Computer simulation results show that the proposed cooperative retransmission scheme can significantly improve the throughput by increasing the probability of successful retransmission.

• Journal of Korea Multimedia Society
• /
• v.14 no.2
• /
• pp.258-268
• /
• 2011

Underwater acoustic sensor networks can be used disaster prevention and environmental monitoring systems in underwater environments. Because, the underwater environment is different from the ground, the long propagation delay, low transfer rates and limited bandwidth characteristics should be considered. In this, paper will propose the MAC protocol that allocates time slot into each node according to priority policy through the period of contention-free slot reservation in underwater acoustic sensor networks in order to avoid collision and minimize energy consumption waste. We perform mathematical analysis to evaluate the performance of the proposed protocol with regard to the collision probability, the energy consumption by collision, throughput and channel utilization. We compare the proposed protocol with the conventional protocol, and the performance results show that the proposed protocol outperforms the conventional protocol.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.4
• /
• pp.701-712
• /
• 2012

The concept of $k$-shortest disjoint paths is considered important because the establishment of primary and backup forwarding paths exploiting shorter distance and faster propagation time is a dominant consideration for the design of a survivable backbone network. Therefore, we need to evaluate how well the concept of $k$-shortest disjoint paths is exploited for the design of a survivable ship backbone network considering the international standard related to ship backbone networks, the IEC61162-410 standard specifying how to manage redundant message transmissions among ship devices. Performance evaluations are conducted in terms of following objective goals: link capacity, hop and distance of primary and backup paths, even distribution of traffic flows, restoration time of backup forwarding paths, and physical network topology connectivity.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.9
• /
• pp.3002-3010
• /
• 2000

ATM forum defined several ATM oriented services such as ABR, VBR, CBR, UBR, and others. Among them, ABR service is considered as one of the most appropriate ones in the LAN environment. ABR controls network traffic by using RM cells according to ATM forum standard. In particular, the point-to-multipoint ABR service in general uses consolidation algorithms to solve feedback implosion at the branch point. Consolidation algorithms alleviate propagation delay and network congestion problem: thus, the efficiency of consolidation algorithm is closely related to the network performance. In this paper, we describe the limitation of existing consolidation algorithms based on thorough analysis, and then propose an algorithm that performs better than the existing algorithms. We show that the proposed algorithm improves network performance through a parametric simulation, In our simulation the performance measure is the cell rate which is controlled by exploiting the congestion depth. We also found that the proposed algorithm not only improves efficiency of network, but also eliminates the consolidation noise.

• Journal of Korea Multimedia Society
• /
• v.13 no.11
• /
• pp.1657-1666
• /
• 2010

Underwater wireless sensor networks (UWSN) need stable efficient data transmission methods because of environmental characteristics such as limited energy resource, limited communication bandwidth, variable propagation delay and so on. In this paper, we explain an enhanced hybrid transmission method that uses a hexagon tessellation with an ideal cell size in a two-dimensional underwater wireless sensor network model (2D) that consists of fixed position sensors on the bottom of the ocean. We also propose an energy efficient sensing and communication coverage method for effective data transmission in a three-dimensional underwater wireless sensor network model (3D) that equips anchored sensors on the bottom of the ocean. Our simulation results show that proposed methods are more energy efficient than the existing methods for each model.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.9B
• /
• pp.745-750
• /
• 2008

In a cognitive radio based system, quality of service (QoS) for the secondary user must be maintained as much as possible even while that of the primary user is protected all he time. In particular, switching wireless links for the secondary user during the transmission of multimedia data causes delay and information loss, and QoS degradations occur inevitably. The efficient resource management scheme is necessary to support the seamless multimedia service to the secondary user. This paper proposes a novel frequency selection method based on Multi-Criteria Decision Making (MCDM), in which uncertain parameters such as received signal strength, cell load, data rate, and available bandwidth are considered during the decision process for the frequency selection with the fuzzy set theory. Through simulation, we show that our proposed frequency selection method provides a better performance than the conventional methods which consider the received signal strength only.