• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.12
• /
• pp.2836-2843
• /
• 2015

Due to metallicity of materials, a vessel has a limitation to adopt RF-based wireless communication technologies for the inner communication means. Visible Light Communication(VLC) can be a sound alternative to dissolve such a limitation. Using a visual light as a transmission medium, VLC is free from radio interferences and restriction of radio usages which are typically related to RF-based wireless communications. In addition, VLC can not only require the facility cost relatively low because of being possibly converged with existing LED illumination, but also be harmless to the human body. This paper proposes an indoor location-based emergency call service system solution for ships using the VLC technology that supports 256Kbps data rate and 5m transmission distance. This paper presents real implementation and testing results of the solution which verifies the propriety of the proposal.

• Journal of Satellite, Information and Communications
• /
• v.10 no.3
• /
• pp.127-130
• /
• 2015

ITU-R has conducted a studies for the frequency allocation to the maritime mobile satellite service (MMSS) in the 7375 - 7750 / 8025 - 8400 MHz under WRC-15 agenda item 1.9.2. In order to allocate a certain frequency bands to the new service, compatibility between new service and the existing services is ensured taking into account protecting the existing services form interference of new service. In this paper, we present current studies results of the frequency sharing studies between new allocation to MMSS and the existing services in the ITU-R. In addition, some proposals for allocating the 7/8 GHz frequency bands to MMSS are also considered for efficient spectral utilization with respect to preparing WRC-15.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.3
• /
• pp.236-241
• /
• 2001

The speckle pattern is formed by laser light from a multimode optical fiber. The speckle fluctuation is the result of interference among propagation modes when the optical fiber is subjected to a mechanical perturbation at any point along its length. The experiments were carried on for the study of the feasibility of producing an intrusion detection system using the speckle fluctuation. The speckle fluctuation signals were monitored at real time by an oscilloscope which was connected with a rectifier and a FVC. We used a jig as a PD holder to improve the sensitivity of speckle phenomena and simplify its structure. So we can know the time and magnitude of perturbation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.4 no.1
• /
• pp.32-37
• /
• 1979

The corona noise level at the place 10m and the frequency 1MHz from the new 345KV transmission line is 72dB in the maximum rain-fall and 63dB due to the wet conductors. The synthesized corona noise level of all 3 phases dominantly depends on the phase which has maximum corona level among them. The measured characteristic of the variation with distance from the line coincided well with the theoretically calculated value in this paper. The corona noise level was the highest level in rainy weather or snow-fall. It takes a few hours, for the corona noise to be stable after a rain-fall or snow-fall. The measured value of the corona noise level corresponds quite well with the formula for the corona noise level revision. It was necessary to quantize S/N ratio into radio reception quality for the radio interference due to the transmission line. Some regulations for radio reception quality were defined through long term experiments and ratings by ITU, IEEE comittee, NHK in Japan and others. Fixing our own regulation about radio reception quality should be required.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.12B
• /
• pp.2335-2341
• /
• 1999

The $2\times32$ coupler consists of Mach-Zehnder interferometer and Y branch coupler. For the designs of this coupler, three dimensional rectangular core waveguide decomposed to two-dimensional structure by the effective index method. To optimize the waveguide structure, the confinement factor was investigated with two-dimensional finite difference Beam Propagation Method. The $2\times32$ coupler fabricated by simulation with height between Mach-Zehnder arms, H=$43.6\mu\textrm{m}$(path difference $0.668\mu\textrm{m}$) was showed best characteristics. In the results of dry etching of core layer, the etching rate of core layer was above 2600${\AA}$/min, the etching ratio of SiO2 to Al mask was 30:1 and the uniformity of etching was $\pm$5%. The maximum insertion loss and the uniformity of $2\times32$ coupler were below 19.2dB, 2dB respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.4
• /
• pp.467-475
• /
• 2014

In this paper, we introduce a sparse recovery algorithm applied to a radar signal model, based on the compressive sensing(CS), for the formulation of the radar signatures, such as high-resolution range profile(HRRP) and ISAR(Inverse Synthetic Aperture Radar) image. When there exits missing data in observed RCS data samples, we cannot obtain correct high-resolution radar signatures with the traditional IDFT(Inverse Discrete Fourier Transform) method. However, high-resolution radar signatures using the sparse recovery algorithm can be successfully recovered in the presence of data missing and qualities of the recovered radar signatures are nearly comparable to those of radar signatures using a complete RCS data without missing data. Therefore, the results show that the sparse recovery algorithm rather than the DFT method can be suitably applied for the reconstruction of high-resolution radar signatures, although we collect incomplete RCS data due to unwanted interferences or jamming signals.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.7A
• /
• pp.725-730
• /
• 2010

Preparing the conversion to the digital broadcasting system, we are deciding broadcasting network plan and interference protection area, using the measured receiving electric field level from the digital broadcasting station. However, the essential researches are needed about a receiving electric field level, because a digital TV (DTV) broadcasting receiver has been improved and an actual receiving environment should be considered. In this paper, the measured data were classified with domestic terrain of line of sight (LOS) and those of non-LOS, and effective receiving electric field level was proposed based on the LOS data. It is known that receiving electric field-level of 48 ㏈uV/m or more should be required for receiving rate of 90% and 50 ㏈uV/m for that of 95%, on the basis of the information of domestic terrain LOS.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.12B
• /
• pp.1349-1358
• /
• 2009

Because of the limitation of supporting power, the current WSN(Wireless Sensor Network) Technologies whose one of the core attributes is low power consumption are the best solution for shipping container networking in stack environment such as on vessel. So it is effective to use the Wireless Sensor Network Technology. In this case, many nodes join in the network through a sink node because there are difficulties to get big money and efforts to set up a lot of sink node. It needs clustering-based proactive protocol to manage many nodes. But it shows low reliability because they have effect on radio frequency in metal obstacle environments(interference, distortion, reflection, and etc) like the intelligent container. In this paper, we proposed an improved Modified LEACH Protocol for stableness radio frequency environment. In the proposed protocol, we tried to join the network and derived stable topology composition after the measuring of link quality. Finally, we verified that the proposed protocol is composing more stable topology than previously protocol in metal obstacle environment.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.48 no.5
• /
• pp.1-6
• /
• 2011

LED(Light Emitting Diode) components have advantages of longer lifetime, lower power consumption and easy-to-control, compare to normal lamp and fluorescent light, according to the development of recent technologies. Thus, lots of illuminations which utilize LED components could be used. Recently, Visible Light Communication(VLC) which is a part of communication technologies, utilizing high speed response characteristic of LED components, started receiving public attention. In case of VLC, there is no need of frequency allocation due to no use of radio, but also no interference exists during data transmission, much different in ISM((Industrial Scientific Medical band). This is the reason why a lot of research results about VLC are becoming issued. In this paper, a survey of feasibility for using VLC utilizing an original LED illumination for underwater applications has been done and a primitive possibility of its application has been examined.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.5
• /
• pp.438-444
• /
• 2016

In this paper, A real-time channel module which can apply the wireless propagation channel was developed using USRP and Lab-VIEW. When the proposed channel module is used in conjunction with the implemented HW(hardware) simulators for cognitive radio and frequency interference analysis and so on, it can increase the reliability about wireless propagation environments. In addition, the proposed module overcomes the limit of existing HW simulator that data transfer rate is limitative in communication system through the design of the inner parts. Along with this, it is possible to apply channel parameters necessary to estimate the easier communication performance. Also, this has the advantage that it can be flexibly applied in implementing the communication channel with the upcoming new scenarios. The proposed module can estimate the communication performance via constellation and BER using the implemented module.