• Journal of Korean Society of Forest Science
• /
• v.111 no.1
• /
• pp.125-135
• /
• 2022

In this study, growth changes of the diameter at breast height (DBH), height, basal area, volume, and biomass of Korean white pine (Pinus koraiensis Siebold & Zucc.) on a plantation were examined via long-term monitoring. In addition, this study was performed to provide the basic data for timber production in line with DBH class by comparing the growth of the relative DBH size. Growth characteristics according to DBH class were analyzed by categorizing trees into five classes based on sorted DBH rankings: class I (1%-20%; upper 20%), class II (21%-40%), class III (41%-60%), class IV (61%-80%), class V (81%-100%; lower 20%). A total class (0%-100%) was also used. Total increment and mean annual increment (MAI) were calculated using data from nine measurements taken over 39 years. Tree characteristics based on average values and stand characteristics based on unit area per hectare were examined. According to the total increments of variables, the differences in DBH, basal area, volume, and biomass among classes I-V increased over time, whereas the height difference did not continually increase. According to MAI, the maximum DBH value was 0.92 cm·yr^-1 at age 23 in class I, whereas the maximum value in all trees was 0.69 cm·yr^-1 at age 17. The maximum value of height MAI for class I was 0.52 m·yr^-1 at age 23, whereas that for all trees was 0.49 m·yr^-1 at age 20. In terms of basal area, volume, and biomass growth at tree-and stand-level, the maximum MAI of class I and all trees was not observed during the measurement period. Therefore, additional long-term monitoring data are required to determine the maximum MAI of the variables.

• Bulletin of the Korean Space Science Society
• /
• 2009.10a
• /
• pp.32.5-33
• /
• 2009

카네기 천문대에서 주도하여 개발 중인 구경 25.4m GMT 망원경 사업에 한국도 공식적으로 참여하였다. 현재 한국천문연구원은 GMT(Giant Magellan Telescope)부경부를 국내에서 개발하고자 이와 관련된 연구를 진행하고 있다. GMT 부경은 직경 1.06m 오목거울 7장이 모여 전체 직경 3.2m인 타원면을 형성하고 초점비는 F/0.7이다. GMT 부경개발 선행 연구과제로 카네기 천문대에서 개발되어 현재 운용중인 구경 6.5m 마젤란 망원경의 부경을 선택하였는데, 이는 마젤란 부경의 형상과 직경, 부경시스템 운영방식이 GMT 와 유사하기 때문이다. 천체관측 망원경에서 거울면의 변형에 가장 큰 영향을 미치는 인자는 거울의 자중이다. 거울의 직경이 커지면 자중이 증가하게 되어 거울면의 처짐이 커지게 된다. 이를 극복하고자 다양한 거울 support들이 개발되었다. 그중에서 counterweight lever 시스템 같은 부양(float) 시스템은 자중의 영향을 보상해 줌으로써 그것에 의한 거울의 변형을 최소화하는 역할을 하는데, GMT 부경 개발에 근간이 되는 마젤란 부경 또한 부양 시스템을 도입하였다. 마젤란 부경의 부양시스템은 counterweight lever 시스템과 유사한 진공 시스템을 도입하였다. 마젤란 부경의 support는 axial 방향으로 거울을 지지하는 axial support와 lateral 방향으로 거울을 지지하는 lateral support가 있는데, 이중에서 axial support가 진공시스템으로 구성된다. Lateral 방향의 지지는 경량화된 거울의 hole 안에 3개의 판스프링을 삽입하여 단지 거울과 판스링의 강성에 의해서만 이루어진다. 이 논문에서는 망원경이 작동을 할때 즉, 천정각(zenith angle)이 변할 때 axial support와 lateral support의 조합(combination)에 의해 지지되는 마젤란 부경의 표면 정밀도 RMS 값을 비교하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.45-45
• /
• 2020

하천 횡단구조물 하류부에서는 고유속 및 ±압력에 의해 하상재료가 유실되는 세굴현상이 발생한다. 이러한 세굴을 방지하기 위해 횡단구조물 하류부에는 석재, 콘크리트 및 콘크리트 블록 등을 설치 및 포설하여 하상보호공을 설치한다. 하상보호공을 설치하면 설치된 부분은 세굴이 방지 되지만, 하상보호공 끝단 이후에는 지반이 노출되어 있어 노출된 지반에서 고유속 흐름 및 압력변화에 의한 세굴이 발생하는 경우가 많다. 이에 본 연구에서는 하상보호공 끝단 즉, 하상이 노출된 지반에서 압력변화에 따라 하상재료가 유실되므로 압력에너지를 감쇄시키기 위한 하상보호장치를 개발하였다. 개발한 하상보호장치는 본래 다수개가 열을 지어 메트릭스 형태로 설치되도록 하여야 하지만 실험 여건상 단일체로 수리실험을 진행하였다. 하상보호장치는 상판과 하판이 조립된 형태이며 상판과 하판 사이에 이격공간이 구비되어있다. 하상보호장치 검증을 위해 상판과 하판에 쓰이는 판은 수로재질과 같은 아크릴로 제작하였으며, 하상재료의 공극률을 반영하여 다공성 판으로 제작하였다. 다공판의 전체 구멍 면적 대비 판 면적은 35 % 로 동일하다. 상판 구멍 지름 15.0 mm, 4.5 mm 2가지로 제작하였으며, 하판 구멍 지름 3.0 mm 으로 동일하다. 압력변화가 큰 곳에서 작은 곳으로 물이 이동하게 되므로 고유속 수리조건에서 상판과 하판 사이에서의 압력변화를 측정하기 위해 판 중간에 압력계를 설치하였다. 하상보호장치 설치지점 앞 0.3 m 부근에 PIV를 설치하여 유속을 측정하였다. 실험결과 상판의 구멍 직경(15.0 mm)이 클 경우 상판부 압력이 하판부로 전달되어 하판에서 측정되는 압력이 증폭 되었으며, 상판의 다공성 구멍 직경(4.5 mm)이 작을 경우 상판부에서 하판부로 전달되는 압력이 감소하여 하판에서 측정되는 압력이 감소하였다. 상판과 하판의 다공성 구멍의 직경을 적절한 사이즈로 조절하면 상판부의 압력이 하판부로 전달되는 것을 막고 압력에 의해 하상에서 흡출되는 유사를 막을 수 있는 것으로 판단되며 추후 상판과 하판의 다공성판 구멍 직경의 상대적 차이에 따른 압력 감소효율에 관한 연구가 필요하다고 판단된다.

• Journal of the Korean Society of Radiology
• /
• v.11 no.4
• /
• pp.247-252
• /
• 2017

Radiologists who experience extravasation of the contrast medium even once suffer mentally during testing due to the fear of its reoccurrence. Establishing a plan for preventing it beforehand is necessary above all because patients experience severe physical and mental pain and become distrusting of medical staff and treatment. Therefore, the present study attempts to prevent extravasation, which is the result of damage from pressure applied to the patient's blood vessels, by lowering PSI, and conducted a comparative analysis of PSI changes during contrast medium injection depending on the diameter of the Y-shape connecting tube which connects the automatic injector and the intravenous injection of the patient. In the case of product A in which the diameter of the Y-shape connecting tube is about 2mm, the average PSI for all ages was 98.5 and standard deviation was 9.72. In the case of product B in which the diameter of the Y-shape connecting tube is about 3mm, the average PSI for all ages was 62.0 and standard deviation was 8.59. Product B with its wider diameter decreased in average pressure by 37.05% when compared to product A, and when product B is used with the p-value at 0.00, pressure decreased even more, achieving statistically significant results.

• Journal of Korean Society of Forest Science
• /
• v.108 no.4
• /
• pp.600-609
• /
• 2019

This study was conducted to highlight the necessity for a stand density control management plan in consideration of the shape ratio of Pinus densiflora and Larix kaempferi in Korea. A total of 2,112 Pinus densiflora samples and 2,030 Larix kaempferi samples were cut, and their diameter at breast height (DBH), height, and clear length were measured for regional shape ratio (height/DBH) comparison and analysis.The shape ratio of Pinus densiflora was 72.3% in the Gangwon district, 64.0% in the central district, and 70.8% on average, indicating a higher percentage of Pinus densiflora in Gangwon than in the central area. Regionally, Yeongju had the highest percentage at 78.4%, with Yeongwol indicating 77.5%. Measured by diameter, results showed a presence of 90.4% for small diameter trees (6-16 cm), 71.7% for medium diameter trees (18-28 cm), and 56.1% for large diameter trees (30 cm). As density increased, the shape ratio of height to tree trunk diameter also increased; below 70% indicated a more stable trunk, while a result above 80% indicated trunks prone to wind hazards and snowstorms, and, therefore, the need for density control in partial areas. The overall shape ratio of Larix kaempferi was 90.6%. Pyeongchang indicated a 108.5% ratio, Yeongju 105.4%, and Danyang 100.5%, respectively.According to diameter class, small diameter trees showed 104.9% occurrence, medium diameter trees 92.7%, and large diameter trees 73.4%. The shape ratio of Larix kaempferi was higher than 80% overall, indicating vulnerability to wind hazards and snowstorms. Therefore, appropriate stand density management is required.

• Journal of Wetlands Research
• /
• v.20 no.3
• /
• pp.243-248
• /
• 2018

This study was carried out to clarify changes in community structure of Quercus acutissima dominant stand on the south slope of Mt. Danseok-san with fixed twenty quadrates. Five field surveys were conducted from Aug. 1999 to May 2018. During the period, the density lessened to 0.20 in 2012 comparing with 0.33 in 1999. However recent field study in 2018 showed moderate rising to 0.24. In 1999, the DBH class distribution of all trees formed reverse J curve. However, the reverse J curve was torn down, forming bell curve. In 2018, the curve showed similar shape of reverse J shape on the group of young trees, forming bell shape on the group of mature trees. It reveals that DBH 13cm is on the threshold of trees competition trend where the downtrend in the trees are on uptrend. The most dominant Q. acutissima formed bell curve. The peak of the curve shows the shift to the right of the graph as it gets lower by year.In case of Q. mongolica, shows a change in the shape of a low bell as the distribution curve increases. The oak stand in this study is in the process of changing from the initial stage of the secondary forest succession to the intermediate stage. The most dominant tree is Q. acutissima, and the sub-dominant tree is Q. mongolica in present. Considering the age distribution of the two competing tree species, the succession of this stand is expected to transfer to the Q. mongolica-dominant community.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.15 no.2
• /
• pp.23-41
• /
• 1987

This study was conducted to investigate the planting status of the woody landscape plant species and to obtain some fundamental informations for improvement of production and sales circulation of the woody landscape plants. The details of 328 landscape projects which were carried out for 2 years from 1983 to 1984 were surveyed to investigate the utilization status of the woody landscpe plants. The results obtained are summarized as fellows ; 1) The utilization rate of the trees to the shrubs as woody landscape plants was 1 : 6 and that of the evergreens to deciduous plants was 1 : 4. The plant species which were most frequently used in landscaping were Buxus microphylla koreana, Juniperus chinensis, Zelkova serrata and Acer saccharinum, howevr, plants which were used in largest quantitites were Ligustrum obtusifolium, Forsythia koreana, Buxus microphylla koreans and Rhododendron yedoense var. poukhanense. 2) The number of plants planted among 3 shrub species(Ligustrum obtusifolium, Forsythia koreana and Buxus microphylla korana) exceeded half of the total number of shrubs planted for landscping, however, the number of plants planted among 8 tree species including Pinus koreainensis were about half of the total tree species. 3) The number of government price specified plant species was only 20%, but the utilization frequency of the price specified plants was as much as 6 times than unspecified plants and 85% of plants used in landscaping works were the price specified plants. The utilization rate of the price specified plants was significantly high in the shrubs than the trees and in the evergreen than deciduous plants. 4) The amounts in use of the price specified standardized plants were significantly more than those of unstandardized plants. When the plant heights are same, the plants having wider canopy or stem diameter were rather frequently used in the landscaping works. The ratio of the width of the canopy or stem diameter to the stem length of the plants in the Korean standard is significantly greater than that in the Japanese standard.

• Journal of Korean Society of Forest Science
• /
• v.78 no.4
• /
• pp.381-395
• /
• 1989

The main purpose of this research is to provide scientific informations about standard wage and performance tariffs in forest management with special reference to working time for thinning. To identify relationships between net working time and tree characteristics, three geographically different sample plots were established at Yangsan, Bongpyung and Jinan and 460 oaks, 372 Japanese larches, 232 red pine and 240 pitch pine mere selected at each sample plots. The results of statistical analysis using multiple regression are as follows ; 1. Five independent variables of breast height diameter(DBH), mid-diameter(MD) large end diameter(LD), log-length(L), No. of branches(NOB) were stable independent of worker and tree species. 2. Comparing correlation coefficient of five independent variables, the best predictive variables, breast height diameter and No. of branches, were selected. Breast height diameter and No. of branches were identified as the most important independent variables in terms of effect on the dependent variable of the working time. 3. Comparing coefficient of determination (Rp) and residual mean square (MSEp), the best Linear regression equation for each tree species was selected as follower : $WT=a+b1{\times}NOB+b2{\times}DBF$ 4. Proportion of hang-up time to total working time in thinning were 66% in oak stand, 74%, in Japanese larch stand, 55%, in red pine stand and 52% in pitch pine stand, respectively. 5. Based on the best regression equation, a table of working time was made by strata of number of branches and breast height diameter. 6. Total working time using the best regression equation in Table 5 can be predicted in terms of felling time, limbing time, hang-up time, i.e., total working time increases by 11 to 13 seconds with every 1 centimeter increase in breast height diameter from 7 to 16 centimeter.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.49 no.5
• /
• pp.59-70
• /
• 2021

This study was to investigate the measurement point of root collar diameter of landscape trees in Korea. It may contribute to avoiding disputes caused by the difference in measurement criteria of root collar diameter of landscape trees between tree growers and constructors. The difference between landscape trees' root collar diameter measurement point was 3.59cm from 6cm underground to the surface and 1.35cm from 0cm to 6cm above ground. The source root collar diameter measurement point difference was larger in the basement than in the ground. The standard deviation of the root collar diameter of the landscape tree was 0.64 from 6cm underground to the surface, and the difference in standard deviation from 0cm to 6cm above ground was 0.16. The difference by measurement point of the root collar diameter was larger in the basement than in the ground. It has been proposed to set the reasonable measurement point of the landscaping tree root collar diameter at the inflection point where the standard deviation of the tree trunk diameter is the smallest in line with the size change of the standard for each root collar diameter measurement point. By tree species, Cornus officinalis Siebold & Zucc. 18cm above the ground, Chionanthus retusus Lindl. & Paxton. 12cm above the ground, Zelkova serrata (Thunb.) Makino. 12cm above the ground, Celtis sinensis Pers. 12cm above the ground, Styrax japonicus Siebold & Zucc. 10 cm above the ground, Cornus officinalis Siebold & Zucc. 10cm above the ground, Acer palmatum Thunb. ex Murray. 6cm above the ground, Ilex rotunda Thunb. 6cm above the ground, Quercus myrsmaefolia Blume. 4cm above the ground, Lagerstroemia indica L. 2cm above the ground The above heights were shown as reasonable measurement points. The difference by landscape tree root collar diameter measurement site showed that the standard deviation was small throughout the tree species, and the reasonable average measurement point with a stable slope of the deviation was 12cm or more on average. It can be said that the reasonable measurement point of the root collar diameter of a landscape tree is set at an average of 12cm above the ground. However, recognizing 30cm, which is a familiar ruler(尺) in traditional practices, is quick, It was recommended to measure at the height of 30cm from the surface for a reasonable measurement point of the root collar diameter of a landscape tree, for the uniformity of measurement standards.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2001.11a
• /
• pp.161-164
• /
• 2001

본 논문에서는 주어진 주파수대역에서 우수한 원편파 특성을 가지고 광대역에서 저반사 손실을 가지는 이종대역 안테나 피드용 원형도파관 유전체 편파기의 설계기법을 제시하였다. 양호한 편파특성을 위한 유전체판 두께와 원형 도판관 직경의 결정방법을 제시하였다. 또한 이종 대역 안테나 피드용으로 광대역에서 저반사 손실을 가지기 위한 유전체 형상 설계기법을 제시하였다.