• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.7
• /
• pp.18-25
• /
• 2014

To increase wireless capacity, the concurrent use of multiple wireless interfaces on different frequency bands, called aggregation, can be considered. In this paper, we focus on aggregation of multiple Wi-Fi interfaces with packet-level traffic spreading between the interfaces. Two aggregation schemes, link bonding and multipath TCP (MPTCP), are tested and compared in a dualband Wi-Fi radio system with their Linux implementation. Various test conditions such as traffic types, network delay, locations, interface failures and configuration parameters are considered. Experimental results show that aggregation increases throughput performance significantly over the use of a single interface. Link bonding achieves lower throughput than MPTCP due to duplicate TCP acknowledgements (ACKs) resulting from packet reordering and filtering such duplicate ACKs out is considered as a possible solution. However, link bonding is fast responsive to links' status changes such as a link failure. It is shown that different combinations of interface weights for packet spread in link bonding result in different throughput performance, envisioning a spatio-temporal adaptation of the weights. We also develop a mathematical model of power consumption and compare the power efficiency of the schemes applying different power consumption profiles.

• Korean Journal of Environmental Agriculture
• /
• v.30 no.3
• /
• pp.243-251
• /
• 2011

BACKGROUND: Gypsum($CaSO_4{\cdot}2H_2O$) is known as an ideal amendment to improve soil quality of the reclaimed coastal land. Since gypsum has very high concentration of electron acceptor like ${SO_4}^{2-}$, its application might be effective on reducing $CH_4$ emission during rice cultivation, but its effect has not been studied well. METHODS AND RESULTS: The effect of gypsum on $CH_4$ emission and rice growth characteristics was studied by pot test, which was packed by reclaimed paddy soils collected from Galsa, Hadong, Gyeongnam province. Chemical-grade gypsum was applied in two soils having EC 2.25 and 9.48 dS/m at rates of 0, 0.5, 1.0 and 2.0%(wt/wt). $CH_4$ emission was characterized a week interval by closed chamber method during rice cultivation. $CH_4$ emission rate was significantly decreased with increasing salt accumulation and gypsum application levels. With increasing gypsum application, dissolved ${SO_4}^{2-}$ concentration in the leachate water was significantly increased, which might have suppressed $CH_4$ production in soil. Total $CH_4$ flux was dramatically decreased with increasing gypsum application. In contrast, rice yield was increased with increasing gypsum application and then achieved maximum productivity at 1.0% gypsum application in two soils. CONCLUSION(s): Gypsum is a very good soil amendment to suppress $CH_4$ emission in reclaimed coastal paddy soils, and improve rice productivity and soil properties. The optimum application level of gypsum is assumed at ca. 1% to improve soil productivity with reducing effectively $CH_4$ emission during rice cultivation.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.8 no.2
• /
• pp.178-186
• /
• 2015

Endurance time is very important indicator to estimate muscle fatigue. In the case of measuring endurance time directly, it is dangerous for subject to perform a test until the point of failure to main time force. Therefore, this paper presents the model to estimate endirance time using indirect measurements such as personal factors and anthropometrical data. Previous studies had shown that personal factors such as gender and age were not related to endurance time, but recently studies have shown that it is estimated by using independent variable or predictor such as GTA (Gravitational Torque of the horizontal, stretched arm) and MVC (Maximum Voluntary Contraction). The present study investigated variables to estimate endurance time using personal factors and anthrometrical data during isotonic contractions. Twenty five healthy subject volunteered for this study, and performed three test sessions of isotonic contraction exercises at 10~50% respectively. Afterward the correlation coefficient and p-values were compared among regression models using personal factors and anthropometrical data. The results demonstrated that multi-regression model had significant coefficient of correlation, and was useful estimate endurance time.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.3
• /
• pp.41-49
• /
• 2009

Flash memory has become increasingly requestion for the importance and the demand as a storage due to its low power consumption, cheap prices and large capacity medium. This research is to design a high performance flash memory structure for the substitution of a hard-disk by dynamic prefetching of aggressive spatial locality from the spatial smart buffer system. The proposed buffer system in a NAND flash memory consists of three parts, i.e., a fully associative victim buffer for temporal locality, a fully associative spatial buffer for spatial locality, and a dynamic fetching unit. We proposed new dynamic prefetching algorithm for aggressive spatial locality. That is to use the flash memory instead of the hard disk, the proposed flash system can achieve better performance gain by overcoming many drawbacks of the flash memory by the new structure and the new algorithm. According to the simulation results, compared with the smart buffer system, the average miss ratio is reduced about 26% for Mediabench applications. The average memory access times are improved about 35% for Mediabench applications, over 30% for Spec2000 applications.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.10c
• /
• pp.514-516
• /
• 2004

위성의 개발을 위해서는 오랜 개발기간과 많은 예산, 축적된 기술이 요구된다. 또한 위성에는 다양한 분야의 기술이 사용되어지기 때문에 각 서브시스템마다 독자적인 개발환경을 구축할 필요가 있다. 특히 위성의 찌어. 임무수행 및 지상과의 통신 등을 담당하는 탑재소프트웨어는 위성의 용도 및 목적에 따라 개발환경이 크게 달라진다. 실시간 운영체제는 무엇을 사용하는지, 개발 및 검증을 위한 도구로 어떤 프로그램을 사용하는지, 내외부의 인터페이스는 어떠한 방식으로 수행할지, 새로운 기능의 CPU나 하드웨어에 대한 제어 등 위성의 탑재소프트웨어를 개발하기 위해서는 많은 검토 항목들이 고려되어야 한다. 새로운 위성을 개발할 경우 신기술의 적용과 새로운 시스템위성시스템의 검증 및 개발을 위한 개발검증장비가 요if되며, 위성시스템의 변경 때마다 개발검증장비를 새로이 구축하게 되면 많은 기간과 막대한 비용이 위성개발 시마다 소요된다. 위성선진국에서는 다양한 위성의 개발 시 비용절감 및 개발기간 단축을 위하여 범용위성용 개발검증장비를 개발하여 이용하고 있는 추세이다. 국내에서는 다목적실용위성 1호가 발사되어 성공적으로 임무를 수행하고 있으며 다목 실용위성 2호가 개발되어 현재 통합 및 조립시험이 진행 중이다. 그러나 새로운 위성시스템의 사전 검증 및 신기술의 적용을 위한 범용위성 시스템 테스트베드에 대한 기술은 미비한 실정이다. 이러한 범용위성용 개발검증장비의 기반기술을 확보하기 위하며 현재 위성전자전산시스템 개발검증장비에 대한 연구가 수행되고 있다. 본 논문에서는 현재 수행되고 있는 PowerPC를 이용한 위성 탑재소프트웨어 개발검증시스템의 설계 및 개발현황에 대하여 소개한다.이스는 실험정보가 저장된 데이터베이스, 분석결과가 저장된 데이터베이스, 그리고 유전자 정보 탐색을 위한 데이터베이스로 분류해 데이터를 효율적으로 관리할 수 있게 하였다. 본 시스템은 LiNUX를 운영체계로 하고 데이터베이스는 MYSQL로 하여 JSP, Perl. 통계처리 언어인 R로 구현되었다.프트웨어를 사용하지 않고도 국내의 순수 솔루션인 리눅스 기반의 LonWare 3.0 다중 바인딩 기능을 통해 저 비용으로 홈 네트워크 구성 관리 서버 시스템 개발에 대한 비용을 줄일 수 있다. 기대된다.e 함량이 대체로 높게 나타났다. 점미가 수가용성분에서 goucose대비 용출함량이 고르게 나타나는 경향을 보였고 흑미는 알칼리가용분에서 glucose가 상당량(0.68%) 포함되고 있음을 보여주었고 arabinose(0.68%), xylose(0.05%)도 다른 종류에 비해서 다량 함유한 것으로 나타났다. 흑미는 총식이섬유 함량이 높고 pectic substances, hemicellulose, uronic acid 함량이 높아서 콜레스테롤 저하 등의 효과가 기대되며 고섬유식품으로서 조리 특성 연구가 필요한 것으로 사료된다.리하였다. 얻어진 소견(所見)은 다음과 같았다. 1. 모년령(母年齡), 임신회수(姙娠回數), 임신기간(姙娠其間), 출산시체중등(出産時體重等)의 제요인(諸要因)은 주산기사망(周産基死亡)에 대(對)하여 통계적(統計的)으로 유의(有意)한 영향을 미치고 있어 $25{\sim}29$세(歲)의 연령군에서, 2번째 임신과 2번째의 출산에서 그리고 만삭의 임신 기간에, 출산시체중(出産時體重) $3.50{\sim}3.99kg$사이의 아이에

• Journal of Conservation Science
• /
• v.25 no.4
• /
• pp.439-450
• /
• 2009

The purpose of this study is to find out characteristics of the fillers made by epoxy resin (L-30) and filling epoxy resin (L-50) with talc, quartz sand and wollastonite with different mixture ratio of 5%, 50%, 80%, 120%, and 150%. The viscometer and colorimeter were used to measure the viscosity and chromaticity of the fillers. Additionally, IC and SEM were used to reveal characteristics of the filler, and checked ultrasonic wave velocity, compressive strength and contact angle to estimate the stability between the filler and stones which are essential for conservation treatments. The filler mixed with the talc had the lowest value in the ultrasonic wave velocity analysis, and its compressive strength decreased as the mixing rate of talc increased. On the other hand, wollastonite had higher values than others in the ultrasonic wave velocity and the compressive strength regardless of epoxy resin type, also, these values increased as mixing rate increased. The properties of the filler, which include the granularity and shape, have influence on characteristics of the stone conservation adhesives. Thus, the filler type, characteristic, and mixture ratio must be considered for effective conservation treatment.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.12 no.2
• /
• pp.95-102
• /
• 1979

Brevibacterium flavum treated with phenol derivatives, guaiacol and o-vanillin has been revealed the marked increased ability in glutamic acid fermentation as 14.2 g/l in o-vanillin treated, 12.5 g/l in guaiacol treated while the 7.0 g/1 in nontreated cell. The increased ability of phenol derivatives treated cells in glutamic acid fermentation was ascribed to the formation of charge-transfer complex between phenols and oxygen. The charge-transfer complex effectively supply the oxygen to the fermention system in spite of high potential gradient in oxygen transfer formed by high cell concentration as insulator on film of air-liquid interface.

• Restorative Dentistry and Endodontics
• /
• v.31 no.4
• /
• pp.323-329
• /
• 2006

The aim of this study was to evaluate the retrievability of Resilon as a root canal filling material Twenty-seven human single-rooted extracted teeth were instrumented utilizing a crown down technique with Gates-Glidden burs and ProFile system. In group1 (n = 12) canals were obturated with gutta percha and AH-26 plus sealer using a continuous wave technique and backfilled. In group 2 (n = 15) Resilon was used as a filling material. Then teeth were sealed and kept in $37^{\circ}C$ and 100% humidity for 7 days. For retreatment, the samples were re-accessed and filling material was removed using Gates-Glidden burs and ProFiles. Teeth were sectioned longitudinally to compare the general cleanliness and amount of debris $({\times}\;75)$ using SEM. Chi-square test was used $({\alpha}\;=\;0.05)$ to analyze the data. The total time required for removal of filling materials was expressed as mean ${\pm}SD$ (min) and analyzed by the Student t-test $({\alpha}\;=\;0.05)$, Required time for retreatment was $3.25\;{\pm}\;0.32$ minutes for gutta percha/ AH 26 plus sealer and $3.05\;{\pm}\;0.34$ minutes for Resilon. There was no statistically significant difference between the two experimental groups. There was no significant difference between the groups in the cleanliness of the root canal wall. This study showed that Resilon was effectively removed by Gates-Glidden burs and ProFiles.

• Restorative Dentistry and Endodontics
• /
• v.23 no.2
• /
• pp.561-574
• /
• 1998

The purposes of this study were to observe the difference in the root canal wall after hand instrumentation or engine-driven Ni-Ti instrumentation under the scanning electron microscope, and to evaluate the apical leakage provided by continuous wave of canal filling technique with or without root canal sealer and smear layer. Twenty recently extracted human maxillary anterior teeth were instrumented with K-type files or engine-driven Ni-Ti files, Quantec series 2000$^{TM}$ and irrigated with 5.25% NaOCl alone or 15% EDT A and final flush of 5.25% NaOCl. After the instrumentation and flushing, teeth were split in half with a knife and a mallet. They were then examined with a scanning electron microscope Forty-four recently extracted human maxillary anterior teeth were divided into four groups with and without smear layer and then warm vertical canal filling using System-B with or without sealer. The extent of leakage was scored after immersion in India ink for 1 week. The results were as follows: 1. No significant difference of smear layer was observed between K-type file-instrumented group and engine-driven Ni-Ti file-instrumented group. 2. A group without smear layer showed significantly less apical leakage than a group with smear layer when sealer was used for the canal filling (p<0.01). 3. There was no significant difference between a group without sealer and smear layer and a group without sealer and with smear layer (p<0.01). 4. In groups without smear layer, a group with sealer showed significantly less apical leakage than a group without sealer (p<0.01). 5. When root canals were irrigated with NaOCl alone, a group with sealer showed significantly less apical leakage than a group without sealer (p<0.01).

• The Journal of the Petrological Society of Korea
• /
• v.22 no.2
• /
• pp.153-177
• /
• 2013

To get the various data on geological information, distributional ratios and characteristics of constituent rocks with geologic ages and rock types were obtained by ArcGIS 10.1 program, digital geologic and geomorphic maps of 1:250,000 scale in Jeonnam and Gwangju areas. In the Jeonnam area, geologic ages can be largely divided into 7, in which their distribution ratios show decreasing trends in the order of Cretaceous, Precambrian, Jurassic, Quaternary, Age-unknown, Carbonifeorus-Triassic and Triassic, and the former fours make the most prevailing ratios of 94.80%. Rock types in the area can be assorted into 57 ones, in which major 7 ones occupy the dominant ratio of 71.68%. Among them, Kav (acidic volcanics+rhyolite and rhyolitic tuff) show much more distribution ratios than the others. It shows more aspects distributed in north, west, middle, east and south parts, especially in Sinan-Mogpo-Yeongam of west and Haenam of south parts in the area, respectively. On the other hand, geological ages in Gwangju area can be largely divided into 5, in which their distribution ratios show decreasing trends in the order of Jurassic, Quaternary, Cretaceous, Precambrian and Age-unknown, and the former fours occupy almost the whole ratio of 98.95%. Rock types in the area are 12 ones, in which major four ones make up the dominant value of 91.30%. Among them, Jurassic granites of the most dominant value are mostly occupied in the southwest-northeast part of the area. Next dominative Quaternary alluvium is mostly developed along the Yeongsan river, the Hwangryong river and their channel junction. And Yongdu and Donggye plains are well developed around the Yeongsan riverline, and channel junction of the Yeongsan and Hwangryong rivers in the area, respectively.