• Korean Journal of Food Science and Technology
• /
• v.37 no.2
• /
• pp.171-177
• /
• 2005

Nutritional compositions and antioxidative activity of Kabocha squash (Cucurvita maxima Duch) as health food were compared with those of pumpkin (Cucurvita moschata Duch). Kabocha squash had higher soluble solids and twofold harder flesh than pumpkin. Crude protein, crude lipid and total amino acid contents of Kabocha squash were higher than those of pumpkin. Major free sugar in Kabocha squash was sucrose, and its content were 2.1 times higher than that of pumpkin. Major organic acids of Kabocha squash and pumpkin were succinic and malic acid, respectively. Kabocha squash had higher amounts of vitamins $A,\;B_1,\;B_2,\;C$ and C than pumpkin, while both showed similar mineral contents except for iron. Contents of Total pectin and hydrochloric acid soluble pectin of Kabocha squash were 17.00 and 7.37 g/100 g AIS, respectively. In pumpkin, total pectin content was 25.14 g/100 g AIS, and water soluble pectin content was higher than those of other pectin fractions. Contents of carotenoid in Kabocha squash and pumpkin were 285.91 and 24,62 mg% d.b., respectively. Kabocha squash had higher electron-donating radical-scavenging activity, SOD-like activity and nitrite-scavenging effect than pumpkin.

• Journal of Life Science
• /
• v.13 no.2
• /
• pp.184-190
• /
• 2003

Myxococcus xanthus is a Gram negative, rod-shaped, soil bacterium that displays a social behaviors, and multicellular development upon nutrient deprivation. The csgA gene encoding a cell surface protein is essential for developmental behaviors including rippling, aggregation, fruiting body formation and sporulation. csgA mutants show normal vegetative growth, but lack all these developmental phenotypes. Expression of the CsgA (C-signal) specific genes are eliminated or dramatically reduced in csgA mutants. In order to identify components of C-signal transduction pathway, second site mutations were introduced into csgA mutants and were identified which can fully or partially restore development of csgA mutants (Rhie, H. G. et. al. 1989. J. Bacteriol. 171, 3268-3276). One of such csgA suppressor mutations, socD500 restores only sporulation to csgA mutants at 15$^{\circ}C$. The socD500 mutaion however eliminates the three basic developmental requirements, starvation, high cell density and a solid surface. Only sporulation, not accompanied with fruiting body formation is induced simply by shifting the temperature of vegetatively growing cells from $32^{\circ}C$ to $15^{\circ}C$. Spores induced by socD500 mutation is not as thick as that of wild-type fruiting body. In socD500 genetic background, two of ten C-signal dependent genes, $\Omega$DK4506 and $\Omega$DK4406 are more highly expressed in growing cells at $15^{\circ}C$. These results indicate that the socD500 mutation may be partly involved in the regulation of expression of two C-signal dependent genes and genes for sporulation in this transduction pathway.

• Journal of the Korean Vacuum Society
• /
• v.7 no.4
• /
• pp.403-409
• /
• 1998

In this study, the effects of multi-dipole type of magnets on the characteristics of the inductively coupled plasmas and $SiO_2$ etch properties were investigated. As the magnets, 4 pairs of permanent magnets were used and, to etch $SiO_2, C_2F_6, CHF_3, C_4F_8, H_2$, and their combinations were used. The characteristics of the magnetized inductively coupled plasmas were investigated using a Langmuir probe and an optical emission spectrometer, and $SiO_2$ etch rates and the etch selectivity over photoresist were measured using a stylus profilometer. The use of multi-dipole magnets increased the uniformity of the ion density over the substrate location even though no significant increase of ion density was observed with the magnets. The use of the magnets also increased the electron temperature and radical densities while reducing the plasma potential. When $SiO_2$ was etched using the fluorocarbon gases, the significant increase of $SiO_2$ etch rates and also the increase of etch uniformity over the substrate were obtained using the magnets. In case of gas combinations with hydrogen, $C_4F_8/H_2$ showed the highest etch rates and etch selectivities over photoresist among the gas combinations with hydrogen used in the experiment. By optimizing process parameters at 1000 Watts of inductive power with the magnets, the highest $SiO_2$ etch rate of 8000 $\AA$/min could be obtained for 50% $C_4F_8/50% H_2$.

• Membrane Journal
• /
• v.21 no.4
• /
• pp.389-397
• /
• 2011

In this study, polymer composite membranes based on sulfonated poly(arylene ether sulfone) (SPAES) were prepared using a solution casting method with different amount of vermiculite (VMT) content. The dispersion of VMT particles in the SPAES matrix was confirmed by means of a scanning electron microscopy observation. The composite membrane containing less than 1 wt% of VMT has a smooth skin on the top and bottom, which means there is a good dispersion of VMT in the matrix. The water uptake of the composite membranes gradually increases as the temperature increases, and the results confirm that all the adsorbed water is bound water because VMT has a strong water affinity on account of its high cation exchange value. A composite membrane with a VMT content of less than 1 wt% increases the proton conductivity and reduces the methanol permeability. Of all the composite membranes, the membrane SPAES/VMT 1.0 has the best fuel cell performance in terms of membrane selectivity. The performance value of SPAES/VMT 1.0 is double that of Nafion 112, which suggests that SPAES/VMT1.0 could be an excellent candidate for direct methanol fuel cells.

• Journal of the Mineralogical Society of Korea
• /
• v.6 no.1
• /
• pp.17-26
• /
• 1993

Mineralogical characteristics of tosudite from the Sungsan and Bubson mines were studied and correlated using X-ray diffraction analysis, chemical analysis and electron microscopy. Tosudite occurs as an alteration product of Cretaceous volcanoclastic rocks in both mines. It is associated with microcrystalline quartz, dickite, illite/smectite or mica/smectite mixed-layer mineral. It forms cryptocrystalline aggregates with flaky habit. XRD analysis suggests that tosudite is an 1:1regularly interstratified dioctahedral smetite/dioctahedral chlorite. Bubsoo tosudite has more(00ℓ ) reflections and more periodice stacking sequence than Syngsan tosudite. Chemical analysis shows that tosudite is a Li-bearing aluminous 1:1 regularly interstrattified mineral composed of K-bedellite and donbassite. Cookeite component may be present in the chlorite layer. Bubsoo tosudite is more Al in tetrahedral site and Ca in interlayer, but less Al in octahedral site than Sugsan tosudite. Tosudite may be formed as the intermediate alteration products, forming after muscovite and before illite/smectite or mica/s$^{\circ}C$mectite, with the range from 100 $^{\circ}C$ to 360 ~ 480 $^{\circ}C$. The hydrothermal solution forming tosudite may be acidic solution with high activities of Si and Al.

• Korean Journal of Materials Research
• /
• v.8 no.8
• /
• pp.744-750
• /
• 1998

Unlike common device, MEMS(micro-electro-mechanical system) device consists of very small mechanical structures which determine the performance of the device. Because of its small mechanical structure inside. MEMS device is very sensitive to thermal stress caused by CTE(coefficient of thermal expansion) mismatch between its components. Therefore, its characteristics are affected by material properties. process temperature. and dimensions of each layer such as chip, adhesive and substrate. In this study. we investigated the change of the thermal stress in the chip attached to a substrate. With computer-aided finite element method (FEM), the computer simulation of the thermal stress was conducted on variables such as bonding material, process temperature, bonding layer thickness and die size. The commercial simulation program, ABAQUS ver5.6, was used. Subsequently 3-layer test samples were fabricated, and their degree of bending were measured by 3-D coordinate measuring machine. The experimental results were in good agreement with the simulation results. This study shows that the bonding layer could be the source of stress or act as the buffer layer for stress according to its elastic modulus and CTE. Solder adhesive layer was the source of stress due to its high elastic modulus, therefore high compressive stress was developed in the chip. And the maximum tensile stress was developed in the adhesive layer. On the other hand, polymer adhesive layer with low elastic modulus acted as buffer layer, and resulted in lower compressive stress. The maximum tensile stress was developed in the substrate.

• Korean Journal of Materials Research
• /
• v.10 no.4
• /
• pp.282-289
• /
• 2000

$PbTiO_3$ films were fabricated by electron cyclotron resonance plasma enhanced chemical vapor deposition(ECR-PECVD). Deposition characteristics of $PbTiO_3$films on $RuO_2$ and Pt substrates were investigated with varying the flow rate of metalorganic source and substrate temperature. The residence time of Pb-oxide molecules in much longer on $RuO_2$ than on Pt substrate, while the perovskite nucleation is more difficult on $RuO_2$ than on Pt substrate. Therefore, the process conditions to obtain the single perovskite $PbTiO_3$ phase are more restricted on $RuO_2$ than on Pt substrates. An introduction of Ti-oxide seed layer increases perovskite nucleation density and thus enlarges the process window to obtain the single perovkite phase. The introduction of Ti-oxide seed layer make the PZT film that Ti-components of $PbTiO_3$ are partially substituted with Zr atoms have single perovskite phase for the wide range of Zr/(Zr+Ti) concentration ratios.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.4
• /
• pp.496-501
• /
• 2009

This study was carried out to investigate physiological functionalities of tea prepared by various thermal processing methods from Ixeris dentata root in order to elevate utilization of Ixeris dentata root as food. These methods included natural drying (ND), hot-air drying (HAD, $75^{\circ}C$), hot-air drying after steam (HADS, steaming at $95^{\circ}C$ for 30 min) and roasting after hot-air drying (RHAD, roasting at $140^{\circ}C$ for $2{\sim}3$ min). Physiological functionalities of tea prepared by ND, HAD, HADS, and RHAD were measured as hot-water extracts and each tea was extracted by 100 mL water on 1 g dried Ixeris dentata root powder. Electron donating abilities were the highest in HADS treatment at 98%. SOD-like activities were the highest in RHAD at 35.61%. Both ACE and tyrosinase inhibitory activities were the highest on ND treatment at 52.34% and 44.60%, respectively. Nitrite scavenging abilities of all treatment were the highest at pH 1.2 and the highest activity among them was on RHAD treatment at 50.5%.

• Applied Microscopy
• /
• v.5 no.1
• /
• pp.9-19
• /
• 1975

In order to clarify the mecahnism of histological barriers to pathogens of witches' broom diseased in sweet potatoes, this experiment has been conducted to observe the relationship between pathological characters and the transfer of mycoplasmae in the shoot apex. The material used the experiment is the sweet potato (Ipomoea batatas (L.) Lamm. Suwon 147). In the experiment regarding of mycoplasmae, the upper limit zone of transfer of mycoplasmae is examined by way of the process of free stock and the shoot apex of a infected part in nature, observed in the culture of each part of the diseased plant which is cut to a certain length. The pathological change pattern of tissues infected with mycoplasmae has been observed under the light and electron microscopes. As a result of this experiment, the following conclusion was arrived at. 1. It has been ascertained that the mycoplasmae are not existent in a promeristem and primary meristem zone from the meristem dome, and is existent in the lower part of the vascular differentiation zone, after which differential tissues the mycoplasmae become progressively enlarged, and before which undifferential tissues it become progressively immatured and diminished in size. 2. It can be suggested that mycoplasmae may not be existed in the shoot meristem, be cause the passing structures such as sieve area and plasmodesma which can be pass ed immatured mycoplasmae is undifferentiated. 3. In the tissue culture, free stock can be obtained in the zone between 1.0-1.5mm of the shoot apex, while it cannot in the 2.0-3.0mm zone, because of infection by mycoplasmae. It is suggested that immature mycoplasmae may be diffused according to temperature ($28{\pm}1^{\circ}C$) in tissue culture process.

• Proceedings of the KSEEG Conference
• /
• 2002.10a
• /
• pp.153-169
• /
• 2002

국내 대리석류 석재자원은 지질시대 및 지구조별로 선캠브리아기의 경기육괴와 영남육괴, 시대미상의 옥천대 남서부, 캠브리아-오오도비스기의 옥천대 북동부, 그리고 일부 기타시대의 옥천대 북동부 등으로 분류될 수 있다. 전자는 변성퇴적암류내에 협재된 결정질 석회암, 화강암질 편마암내 포획된 결정질 석회암 등s으로 경기육괴의 포천, 김포, 온수리, 목계와 신림도폭 그리고 영남육괴의 춘양, 현동, 울진, 중평동, 장기리와 장계도폭 등이 해당된다. 시대미상암류는 옥천대 남서부로서 목계, 충주, 괴산, 강경, 남원과 송정도폭, 그리고 캠브리아기는 풍촌석회암으로 임계, 호명, 서벽리도폭 등기 해당된다. 오오도비스기는 정선석회암이 분포하는 석병산, 평창, 정선과 임계도폭, 화천리층이 분포하는 문경도폭, 그리고 황강리도폭 등디 해당한다 기타시대는 시대미상의 각력질 석회암과 상부석탄기의 홍점층군내 협재하는 결정질 석회암으로, 이들은 각각 정선도폭과 석병산도폭에 위치한다. 선캠브리아기, 시대미상, 캠브리아기 및 오오도비스기 대리석류의 물성 중에서 흡수율과 공극율은 선캠브리아기, 오오도비스기, 시대미상과 캠브리아기의 순으로 점차 감소한다. 이들의 공극율은 비중에 대하여 대체로 불규칙하며, 흡수율은 공극율에 대하여 거의가 뚜렷한 정의 상관관계를 이룬다. 압축강도는 공극율에 대하여 다소 불규칙한, 그리고 인장강도에 대하여 정의 상관관계를 이룬다. 그리고 마모경도는 압축강도와 인장강도에 대하여 대체로 뚜렷한 정의 경향을 각각 보인다. 이들 대리석류는 선캠브리아기 중경암-경암, 시대미상 중경암-경암, 캠브리아기 거의가 중경암-경암, 그리고 오오도비스기는 경암에 각각 해당한다.하고 구현 단계의 문제점들과 해결책을 기술한다. 다 솔레노이드방식 감압건조장치로 건조한 표고버섯으로 품위에 대한 유의성 검증결과, 표고버섯의 경우 온도별로는 색택과 복원률, 건조실 내부 압력별로는 수축률, 복원률에서 유의차가 있는 것으로 나타났다. 라. 본 연구에서 구명된 감압건조특성을 기초로 하여 배치식 감압건조기를 설계 제작에 활용하고자 한다.ational banks. Several financial interchange standards which are involved in B2B business of e-procurement, e-placement, e-payment are also investigated.. monocytogenes, E. coli 및 S. enteritidis에 대한 키토산의 최소저해농도는 각각 0.1461 mg/mL, 0.2419 mg/mL, 0.0980 mg/mL 및 0.0490 mg/mL로 측정되었다. 또한 2%(v/v) 초산 자체의 최소저해농도를 측정한 결과, B. cereus, L. mosocytogenes, E. eoli에 대해서는 control과 비교시 유의적인 항균효과는 나타나지 않았다. 반면에 S. enteritidis의 경우는 배양시간 4시간까지는 항균활성을 나타내었지만, 8시간 이후부터는 S. enteritidis의 성장이 control 보다 높아져 배양시간 20시간에서는 control 보다 약 2배 이상 균주의 성장을 촉진시켰다.차에 따른 개별화 학습을 가능하게 할 뿐만 아니라 능동적인 참여를 유도하여 학습효율을 높일 수 있을 것으로 기대된다.향은 패션마케팅의 정의와 적용범위를 축소시킬 수 있는 위험을 내재한