• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.6 no.2
• /
• pp.11-18
• /
• 1995

The goal of this research is to get a measuring system for absorption characteristics of electromagnetic wave absorbers in fernite type which are flat, grid-type and special type, etc. It is, however, very difficult to measure the absorption characteristics in as low frequency as 30 MHz. To solve the problem, therefore, we propose a standing wave method and a measurement method in time domain using paralledl striplines, construct the measuring system, and measure the charac- teristics of ferrite microwave absorbers in grid type using the proposed measuring system.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.3
• /
• pp.449-459
• /
• 1999

The scattering problems from electromagnetic absorbers can be greatly simplified using the transmission line approximations (TLA) and effective medium theory. This method has been widely used for the absorber design because of its very simple calculation and intuitional approach, while numerical analysis needs the tremendous computation requirements, This paper examined the accuracy and limitations originated by the intrinsic approximation limits of TLA by comparison with FEM results for various absorber design examples. It was found that the TLA result is valid when λ $\geq$ 2p, where λ is the wavelength of the interested upper frequency and p is the distance between two periodic cone arrays. Therefore, the electromagnetic absorbers having high material properties and big base-area commonly do not meet this condition, and the electromagnetic scattering from those absorbers must be evaluated by the numerical analysis in those cases.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.1
• /
• pp.43-50
• /
• 2003

전자산업과 전파통신기술이 고도로 발전함에 따른 전파 이용의 증대로 인해 전자파환경 EMI/EMS이 사회적 문제를 야기하고 있다. 이에 따라, CISPR(Comite Internationale Special des Perturbations Radioelectrique), FCC (Federal Communications Commissions) ANSI (American National Standards Institute)등의 기구는 EMI/EMC 대책을 위해 전파환경의 규정을 제정하고 있다. 또한 EMI/EMC 측정을 위한 전파무향실(anechoic chamber)용 전파흡수체는 20 dB 이상의 전파흡수능이 요구된다. 종래의 EMI 측정 주파수 범위는 30 MHz～l,000 MHz 이었으나 1998년 11월, CISPR11은 1 GHz~18 GHz를 추가하는 안을 받아들였다. 본고는 새로운 형태의 다층형 페라이트 전파흡수체를 제안하고 등가재료정수법을 사용하여 광대역 설계를 시도한 것이다.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.4 no.2
• /
• pp.17-23
• /
• 1993

This study aims to measure the reflection loss and the material constants of the fabricated samples for electromagnectic wave absorber by using $20 mm\phi$ coaxial tube with the endshort-type. The authors have established the extraction algorithm of material constants by one port method, and proved that the results of the experiments were in agreement with the calculated ones. On the basis of the above results, the validity of the proposed measuring method is confirmed. This measurement method could be used effectively for the design of microwave absorber and for its evalustion.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.5 no.4
• /
• pp.40-46
• /
• 1994

Design and microwave absorbing properties of ferrite plate are investigated for the application to the radiowave absorbers used in anechoic chamber. The required frequency-dependence of complex permeability is determined on the basis of wave-impedance-matching relationship. The plate thickness and matchingfrequency are determined from the complex permeability and dielectric constant, and then compared with the directly measured reflection loss. A systematic variation of material constants and their influence on the microwave absorbing properties are demonstrated.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.6 no.2
• /
• pp.19-26
• /
• 1995

The design of broad-band, thin layer electromagnetic wave absorbers usually employs magnetic materials. The common absorber consists of a magnetic material layer bonded to a metal plate at the back. For such structure, a theoretical expression involving six parameters defines the allowable material shape and values of electromagnetic parameters that will produce zero reflection or more practically more than 99% absorption (20dB attenuation). The Secant Method was employed to compute the matching boundary values corresponding to 20dB attenuation. In addition, a search algorithm coupled with the Secant Method was developed to obtain allowable range of material parameters for the design of wave absorbers. These numerical methodes applicable to any six parameters effectively yielded accurate solutions in the least iterations.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.4 no.2
• /
• pp.41-47
• /
• 1993

Electrical and electromagnetic wave absorbing properties of MnZn ferrite-rubber composites have been examined for varying the volume fraction of ferrite powder from 0.1 to 0.4 in the frequency range between 1-10 GHz. As the volume fraction of MnZn ferrite increased, the complex permittivity and permeability of composite increased. The peak of reflection loss at the frequency corresponding to 1/4 wavelength shifts to lower frequency, and shifts to lower frequency as the thickness of absorber increased. We show that for the ferrite-rubber composites the volume fraction of ferrite should be controled to obtain the absorbing properties required in given frequency range.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.1
• /
• pp.40-44
• /
• 1998

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2001.11a
• /
• pp.343-343
• /
• 2001

최근 전자산업과 전파통신산업의 발달에 따라 불요전자파에 의한 전자파장해가 심각한 수 준에 이르게 되었다. 그 결과 국 . 내외 전자파환경은 나날이 악화되고 있으며, 이로 인한 사 회적 문제가 점차 증가되고 있는 실정이다. 이에 대한 대책으로 CISPR(Comite Internationale S Special des Perturbations Radioelectrique), FCC (Federal Communications Commissions) A ANSI(Amercian National Standards Institute) 둥이 주축이 되어 국제 규정이 제정되어 각종 전자기기들에 대해 방사(EMI) 및 내성(EMS)의 규제가 강화되고 있다. 그러나 국제규정이 요구하는(30 MHz - 18 GHz) 주파수 범위에서의 EMIjEMS 측정을 하기 위해 광대역(Broad-band) 전파무향실(Anechoic Chamber)이 필요하지만1 기존의 Ferrite T Tile 또는 그리드형 전파홉수체는 20 dB 이상 전파를 홉수할 수 잇는 주파수 대역이 30 M MHz - 400 MHz 또는 780 MHz에 불과하기 때문에 상기의 조건을 만족하는 전파무향실 을 구성하기에는 곤란한 실정이다. 본 논문에서는 국제 규격을 만족하는 전파무향실을 위한 광대역 전파홉수체를 개발하기 위해, 다충형으로 구성하고, 전파흡수체의 형상을 변화시켜 등가재료정수법을 사용하여 설계하고 그 특성을 평가함을 그 목적으로 하였다. 따라서 본 논문에서는 본 연구실에서 기폰에 제안한바 있는, 금속판 위에 타일형 페라이 트 충, 그 위에 원추절단형 페라이트 층과 원통형 페라이트 층을 적층시칸 형상의 전파홉수 체는 30 MHz - 6 GHz 정도까지 커버할 수 있으나, 1 GHz 부근의 주파수 대에서 16 dB 정도의 홉수능 밖에 가지지 못하였다. 이를 개선하기 위해, 금속판 위에 타일형 페라이트 층 을 형성하고 그 위에 원통형 페라이트 충, 원추절단형 페라이트 충I 원통형 페라이트 충, 타 원형 페라이트 충을 형성한 새로운 형태의 전파홉수체를 제안하였다. 본 논문에 제안한 새로운 형태의 전파흡수체의 시물레이션 결과 30 MHz - 20 GHz의 주파수 범위에서 전반적으로 25 dB이상의 전파흡수능을 가짐을 확인하였으며/ 특히 기폰에 제안한 전파홉수체와 비교하면,1GHz 부끈에서의 전파홉수능을 10 dB 이상 개선하였다. 나아가서/ 실재로 제작한 전파흡수체의 측정된 주파수특성이 시율레이션에 의한 이론치와 3 30 MHz - 6 GHz의 범위에서 잘 일치함을 확인하였다. 또한y 전파 홉수체의 전체 높이는 2 27 mm 밖에 되지 않으므로 본 연구에서 제안한 전파 홉수체를 사용할 경우 전파무향실의 유 효공간 확보에 매우 유리한 이점을 가진다

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.8 s.99
• /
• pp.842-847
• /
• 2005

In this paper, we fabricated sheet-type EM wave absorbers for mobile phones by using sendusts and tested EM wave absorption of it. The band-width of EM wave absorbers coated with $Al_2O_3$ were larger than non-coated EM wave absorbers. Particle size decreased with increasing milling time, which made the result of increasing of EM wave absorption. The fabricated EM wave absorbers show a reflection coefficient 17.4 dB at 946 MHz for a 4 mm sample and 5 dB at 1.8 GHz for a 1 mm sample.