• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.2
• /
• pp.80-88
• /
• 2003

This paper describes the development of an ozone detector and an electron probe as parts of scientific payloads for sounding rockets such as the KSR-III. Each detector consists of sensor parts and electronic parts. We successfully carried out the calibration tests with developed ozone detector and the space plasma simulation chamber tests with electron detector. These payloads could be onboard the KSR-III and with measured data, it is expected and temperature profile over the Korean Peninsular.

• Aerospace Engineering and Technology
• /
• v.1 no.2
• /
• pp.83-90
• /
• 2002

This paper describes the development of scientific payload system onboard the KSR-III. The ozone detector(UVR), Langmuir electron probe(LEP), airglow photometer(AGP), and magnetometer(MAG) constitute this system. The purpose of the ozone detector is to measure the ozone density profile and the LEP measures the electron density and temperature in the ionosphere over the Korean Peninsula. The AGP detects airglow in the mesosphere over the Korean Peninsular. The MAG provides rocket attitude and the magnetic fluctuation information during the flight. With the developed payloads, the ground calibration tests and the environmental tests have been performed.

• Journal of Astronomy and Space Sciences
• /
• v.18 no.3
• /
• pp.249-256
• /
• 2001

KARI(Ko.ea Aerospace Research Institute) has measured the ionospheric electron temperature and density over the Korean Peninsular with the Langmuir and Electron Probe(LEP) onboard the Korean Sounding Rocket-II(KSR-II) In 1998. The purpose of LEP is to measure the electron density and temperature profile in the ionosphere. LEP consists of the Langmuir probe(LP) and the Electron temperature Probe(ETP) which are widely used for the measurement of the ionospheric plazma environment . We discuss the development of the Langmuir and Electron Probe which will be onboard the KSR-III and some test results in a simulated space plasma environment with the plasma chamber at the ISAS in Japan. These measurements could contribute to the basic study of ionospheric environment which also can be compared with other reference models such as IRI and PIM.

• The Korean Nurse
• /
• v.4 no.3 s.17
• /
• pp.46-52
• /
• 1965

전자신체기능 측정기가 발명되어 현재 그 자동장치의 효능에 대해서 전국 각지에서 조사하고 있다. 그리하여 전자측정기에 의한 vital sign측정이 종례의 방법보다 좋은 점이 있다는 사실을 지금 바야흐로 발견하기 시작하고 있다. 간호원은 종래의 측정방법에 변화성과 오류가 있을 수 있고 두 가지 중 어느 방법을 택하더라도 정상범위 안에서의 변화나 개인차는 있다는 것을 이해하지 않으면 안 된다고 생각한다. 여기에서 가장 강조하고 싶은 것은 vital sign에 어떤 변화가 생겼을 때 그 변화를 현명하게 해석해서 그의 중요성 여하를 평가할 수 있는 간호원이 되어야 한다는 것이다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.4
• /
• pp.669-676
• /
• 2023

In this paper, a multi-purpose golf putting range finder based on an IR razer sensor and an inertial sensor was designed and made. It was designed to measure distance and slope within a 50m outdoor measurement range for the main purpose of golf putting distance measurement, and at the same time, it is designed to measure temperature information that affects putting. In addition, the distance meter supports house maintenance work by providing length and horizontality measurement values within the indoor 80m measurement range, and provides safety from indoor or vehicle fires by providing indoor temperature measurement values to mobile phones through linkage with the web server. In order to evaluate the accuracy of the proposed method and its interworking performance with a smartphone, a prototype was produced and a web server was built, and the usefulness was confirmed by showing an acceptable error rate within 5% in repeated experiments.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.233-234
• /
• 2009

박막 재료의 면저항 측정은 일반적으로 FPP(Four-Point Probe)원리를 적용한 측정기률 사용하고 있다. 개발된 면저항 측정기의 특징은 dual configuration 기술을 적용하여 탐침 간격에 대한 시료의 크기 및 두께에 대한 보정계수를 고려하지 않아도 되므로 누구나 업고 정확하게 사용 할 수 있다. 측정범위는 $1\;m{\Omega}{/\square}\;{\sim}\;1\;G{\Omega}{/\square}$이며, 반복성과 재현성 및 직선성은 0.1 %이하로서 우수한 특성을 나타냈다. 또한 기존의 면저항 측정기에 적용된 single configuration 기술에서 나타나는 가장자리 효과의 단점을 dual configuration 기술을 적용하여 해결하였고 정밀 정확도를 향상시켰다. 개발된 면저항 측정기의 특성평가는 국가측정표준으로부터 소급성이 유지된 표준저항, 분할저항기, 면저항 인증표준물질 등을 사용하였다.

• Electronics and Telecommunications Trends
• /
• v.6 no.4
• /
• pp.64-75
• /
• 1991

통화당량에서 음량정격으로의 국내 전화 전송기준의 이행작업이 마무리 단계에 있는 것과 때를 같이하여, CCITT 의 음량정격 측정과 관련된 권고를 준수한 음량정격 객관 측정기간의 측정 결과치의 비교를 통해 다른 두 측정기에 의한 측정치의 차이가 CCITT 에서 권고하는 성능을 만족하는지 측정.분석하였다. 그 결과 측정의 오차를 어느정도 고려할 수 있다면 대체로 CCITT 의 다른 측정기들 사이의 측정치의 $\pm1dB$ 이내의 차이를 잘 만족하고 있음을 알 수 있었다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.11
• /
• pp.167-174
• /
• 2012

In this paper a ultrasonic oil level meter for measuring oil levels of vehicle transmissions is designed and its effectiveness is shown by experiments. On a FPGA(Field Programmable Gate Array) project IDE(Integrated Development Environment), all digital circuits for the meter is designed using a FPGA, which enables simplicity and high performance of the meter as well as short developing time. Also, power supplying circuit and analog circuits to process low voltage ultrasonic echo signal are designed and simulated. Under experiments, the designed level meter is verified to provide accuracy to within 1mm.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2012.01a
• /
• pp.117-118
• /
• 2012

본 논문에서는 전자산업공정에서 발생하는 복합오염물질을 측정하고, 분석 관리하는 복합오염물질 분석 관리시스템을 설계하고 구현한다. 이 시스템은 측정기와 분석 및 관리 소프트웨어로 구성된다. 측정기는 복합오염물질을 검출하여 각 오염물질의 수치를 컴퓨터에 전송하는 기능을 제공한다. 분석 및 관리 소프트웨어는 검사, 데이터 관리, 뷰어 등의 모듈로 구성한다. 검사 모듈은 측정기에서 전송된 측정 데이터를 화면에 출력하고, 그 측정 데이터의 정상 기준치 초과 여부를 결정한다. 데이터 관리 모듈은 측정기에서 측정된 방대한 데이터를 데이터베이스에 저장하고 관리하는 기능을 제공한다. 뷰어 모듈은 데이터베이스에 저장된 측정데이터를 그래프 또는 차트 양식으로 출력하는 기능을 제공한다. 본 논문에서 구현한 복합오염물질 분석 관리 시스템은 실제 복합오염물질을 측정하는데 그치지 않고, 그 측정 데이터를 분석하고, 데이터베이스화하여 지속적으로 관리할 수 있는 장점이 있다.

• Radiation Oncology Journal
• /
• v.7 no.1
• /
• pp.93-100
• /
• 1989

Several combinations of measuring devices and phantoms were studied to measure electron beams. Silicon Pmt junction diode was used to find the dependence of depth dose profile on field size on axis of electron beam Depths of 50, 80 and $90\%$ doses increased with the field size for small fields. For some larger fields, they were nearly constant. The smallest of field sizes over which the parameters were constant was enlarged with increase of the energy of electron beams. Depth dose distributions on axis of electron beam of $10\times10cm^2$ field were studied with several combinations of measuring devices and phantoms. Cylindrical ion chamber could not be used for measurement of surface dose, and was not convenient for measurement of near surface region of 6MeV electron. With some exceptions, parameters agreed well with those studied by different devices and phantoms. Surface dose in some energies showed $4\%$ difference between maximum and minimum. For 18MeV, depths of 80 and $90\%$ doses were considerably shallower by film than by others. Parallel-plate ion chamber with polystyrene phamtom and silicon PN junction would be recommended for measurement of central axis depth dose of electron beams with considerably large field size. It is desirable not to use cylindrical ion chamber for the purpose of measurement of surface dose or near surface region for lower energy electron beam. It is questionable that film would be recommended for measurement of dose distribution of electron with high energy like as 18MeV.