• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.334-337
• /
• 2005

The objective of this research works is to propose a rapid development methodology of small size deep drawing tools for electronic parts utilizing the technology combination of CAE and RP/RT. The technology is applied to the development of deep drawing tools with a drain shape. The final surface of tools is obtained from the evaluation of the formability using the CAE. In order to manufacture the physical prototype of tools fer try-out terming, several fabrication experiments are carried out for three types of rapid tool manufacturing technology. Through the fabrication experiments, the acceptable rapid manufacturing technologies of deep drawing tools with a small size have been proposed.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2021.07a
• /
• pp.107-108
• /
• 2021

농업용 전기차는 일반 전기차에 비해 경량성 및 연료의 효율성이 매우 중요하다. 또한, 충돌에 대비한 재질의 강도적인 측면에서 다소 자유로움을 가진다. 본 연구에서는 레이저 가공, 절곡, 도장 등의 복잡한 절차를 통한 가공 공정을 대체하여 생산의 효율성을 극대화 할 수 있는 진공성형을 위한 전기차 전면부 3차원 설계 방법을 제안한다. 보닛 및 휀더의 3차원 설계 및 진공성형 금형 기술 개발을 통하여 제품의 안정성과 생산성 및 편의성을 향상시키는 것이 연구의 주요 목적이다. 주요 연구 절차는 CATIA를 이용한 설계 결과물을 바탕으로 ABAQUS를 이용한 구조해석을 통해 안정성을 확인하고 3D Scanner를 이용하여 시제품의 치수 확인을 통한 실효성을 검증한다. 본 연구의 결과물은 농업용 전기차 주 고객층인 고령자 및 여성 농업 종사자들에게 널리 사용될 수 있을 것으로 사료된다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.1
• /
• pp.78-84
• /
• 2012

Mold may experience deterioration of molding quality as the abrasion of mold occurring due to friction between mold and molded product works as allowance in the course of press process. Therefore, to improve the wear-resistance of mold, methods like nitriding, carburizing, flame and induction surface hardening treatment etc have been applied. However, as such methods are accompanied by problems like shape limitation or product deformation etc, laser surface treatment technology is under review as surface treatment method that can solve such problems. Therefore, in this study, mold material cast iron was surface-treated by using high power diode laser. In previous report 1 and report 2, the heat treatment characteristics were compared by the differences of die materials and shapes, then this paper observed microstructure by using optical microscope and scanning electronic microscope to analyze the structural difference of hardened zone, interface area and base metal after heat treatment. And the structural condition was grasped through EDS. As a result of microstructure, hardened zone showed formation of acicular martensite.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.11
• /
• pp.3280-3286
• /
• 2009

In this paper, we designed and manufactured HD Switch Panel parts with micro-etched pattern. By using CAE analysis, we could predict weld-line positions and the amount of shrinkage during injection molding process. We measured the temperature distribution of the mold surface so that we could optimize the processing conditions such as mold temperature. In order to increase the transcription of micro-etched pattern, we applied the E-Mold technology and evaluated the effect of mold temperature on the surface quality. We concluded that the etched pattern was improved(more than 2.5$\to$1.5~1.7) through the measurement of surface gloss and the observation of both SEM and SPM images.