• Title/Summary/Keyword: 전자접촉기

Search Result 224, Processing Time 0.044 seconds

Investigation of Electromagnetic Force for Magnetic Contactor of Railway Vehicles (철도차량용 전자접촉기 전자코일의 전자기력 특성 연구)

  • Jung, Jooyoung;Park, Ji-Won;Choi, Jinnil
    • Journal of the Korean Society for Railway
    • /
    • v.19 no.3
    • /
    • pp.324-330
    • /
    • 2016
  • A magnetic contactor is a switching device widely used for electric circuits. For the operation of magnetic contactors, magnetic coils are essential; these coils create and interrupt the electric circuit. In this paper, the finite element analysis model was developed to reflect the experimental data, and was verified through alteration of the applied voltages and the numbers of turns. Effects of electromagnetic force on the geometrical variations of the facing poles for fixed and moving cores of two magnet coils were investigated. In addition, effects of slope and air gap size between two facing poles on the electromagnetic force were explored through the distribution of the magnetic flux density in the magnetic coils of a push-type solenoid. Through this analysis, the characteristics of the electromagnetic force against the facing poles were explored.

The study on the characteristics of transient recovery voltage of electromagnetic contactor (전자기 접촉기의 과도회복전압 특성에 대한 연구)

  • Kim, Geun-Yong;Ryu, Jae-Nam
    • Proceedings of the KIEE Conference
    • /
    • 2008.07a
    • /
    • pp.834-835
    • /
    • 2008
  • 전자기 접촉기(electromagnetic contactor)는 교류 또는 직류 저압의 전로(電路)에 사용되는 부하개폐기의 한 종류로 전자석 코일(electromagnet coil)의 여자(勵磁)에 의하여 주 접촉자를 개폐시키는 기기이다. 일반적으로 전자기 접촉기는 단락전류를 차단하도록 설계되어 있지는 않다. 그러므로 설치 시 적절한 단락 보호가 이루어져야 하며, 반드시 접촉기의 일부분일 필요는 없다. 차단기와 퓨즈 등을 단락보호장치(SCPD, Short-Circuit Protective Device)로 많이 사용한다. 전자기 접촉기는 특히 고빈도 개폐를 목적으로 사용되는 개폐기로, 농형모터(squirrel-cage motors)의 시동, 운전 중의 정지, 플러깅(plugging, 모터가 운전하고 있는 중에 모터의 1차측 접속을 역으로 바꿔서 모터를 급격히 정지시키거나 역 회전시키는 것) 및 인칭(inching, 모터를 짧은 기간 동안 1회 또는 반복 여자해서 피동기구를 조금 이동시키는 것)에 많이 쓰인다. 이러한 기기의 개폐특성을 평가하기 위한 부하는 과도회복 전압의 진동 주파수(oscillatory frequency)와 진폭율 ${\gamma}$를 얻을 수 있도록 조정되어야 한다. 본 논문에서는 고빈도 개폐능력을 갖고 있는 전자기 접촉기의 과도회복 전압 특성과 그 특성을 얻기 위한 부하 회로의 조정방법에 대해 고찰하였다.

  • PDF

Comparative Study on Operational Speeds Based on Contact Material of Magnetic Contactor (전자접촉기의 접촉소재에 따른 동작속도 비교 연구)

  • Yeong-Jin Goh
    • Journal of IKEEE
    • /
    • v.27 no.3
    • /
    • pp.246-250
    • /
    • 2023
  • Magnetic Contactor (MC) research traditionally focuses on arc erosion influenced by contact material. In recent times, with an increasing demand for efficient utilization of DC devices and swift processing, the operational speed of MCs has become paramount. While AgSnO2 generally displays superior response characteristics to AgCdO, this understanding remains material-specific. In this paper, complete MCs were constructed, and the operational speeds were validated based on the two materials.

The study on the oscillatory frequency and factor(γ) of transient recovery voltage (과도회복전압의 진동주파수와 진폭율에 대한 연구)

  • Kim, Geun-Yong;Sung, Ki-Wook
    • Proceedings of the KIEE Conference
    • /
    • 2009.07a
    • /
    • pp.652_653
    • /
    • 2009
  • 주어진 조건 하에서 의도하는 기간 동안 요구된 기능을 적절하게 수행하기 위해서는 제품의 신뢰성 확보가 무엇보다도 중요하다. 신뢰성 확보를 위해서는 제품의 안전성 및 내구성에 대한 고려가 충분히 이루어져야 한다. 고빈도 개폐를 목적으로 사용되는 전자기 접촉기 또한 제품의 안전성 및 성능의 신뢰성이 중요한 제품이라 할 수 있다. 그래서 이를 검증하기 위한 전자기 접촉기의 부하개폐동작성능에 대한 평가가 중요한 시험항목으로 부각되고 있다. 그리고 개폐특성을 평가하기 위한 부하는 규정된 과도회복전압특성을 얻을 수 있도록 조정되어야 한다. 본 논문에서는 부하측 중성점 접지 방식의 부하 회로 조정방법을 사용하여 전자기 접촉기의 개폐성능을 평가하기 위한 과도회복전압의 진동주파수와 진폭율의 특성을 고찰하였다.

  • PDF

업계동정

  • Korea Electrical Manufacturers Association
    • NEWSLETTER 전기공업
    • /
    • no.97-9 s.178
    • /
    • pp.33-36
    • /
    • 1997
  • PDF

Optimization Analysis of Driving Gear of Large Capacity Non-contact Mixer for MLCC Electronic Materials (MLCC 전자재료용 대용량 비접촉식 교반기 구동기어의 형상최적화 구조해석)

  • Choi, Byungju;Yang, Youngjoon
    • Journal of Energy Engineering
    • /
    • v.25 no.3
    • /
    • pp.51-58
    • /
    • 2016
  • MLCC is key parts of many electronic products and mixer is used to make MLCC. Currently, non-contact mixer is increasingly used due to its many merits. In case of large capacity non-contact mixer, function of driving gear is important. In this study, therefore, in order to reduce manufacturing cost through optimal design of driving gear of large capacity non-contact mixer, study on shape optimization of driving gear without excessive design modification was performed. As the results, because safety factors of modification model were decreased about 3.0 ~ 3.5 times compared with those of model with robust design, the possibility for saving manufacturing cost was confirmed.

Contactless System using ㅁㅓ type core and Series-Parallel Resonant Converter (ㅁㅓ 형 코어와 직병렬 공진 컨버터를 이용한 비접촉 시스템)

  • Jin, Kang-Hwan;Kim, Ji-Min;Kim, Soo-Hong;Kim, Yoon-Ho;Kim, Eun-Su
    • Proceedings of the KIPE Conference
    • /
    • 2007.07a
    • /
    • pp.169-171
    • /
    • 2007
  • 비접촉 전력전송 시스템에 사용되는 변압기는 일반적인 변압기와 달리 구조적으로 분리된 형태를 갖는다. 이로 인해 결합 시 일반적인 변압기에 비해 큰 공극이 발생하게 된다. 본 논문에서는 상대적으로 큰 공극이 발생하여도 높은 결합계수를 유지하여 전력전달 특성이 우수한 'ㅁㅓ' 코어를 이용한 비접촉 변압기를 제안하였다. 그리고 제안된 변압기의 공극변화에 따른 인덕턴스 파라미터 변화 및 부하변화에 따른 효율특성을 분석하였다. 컨버터 시스템은 모든 부하에서 높은 효율특성을 갖는 직병렬 공진 컨버터를 사용하였으며, 시뮬레이션을 통하여 그 특성을 분석하였다.

  • PDF

A test result of dynamic character about low voltage electric machine under voltage sags (순간전압강하에 대한 저압기기의 응동특성 실험결과)

  • Lee, Geun-Joon;Lee, Hyun-Chul;Jeong, Sung-Won;Gim, Jea-Hyun
    • Proceedings of the KIEE Conference
    • /
    • 2007.11b
    • /
    • pp.40-42
    • /
    • 2007
  • 본 논문은 전기기기에 순간전압저하를 발생 하였을 경우 응동특성에 대한 영향을 계측하였다. 실험 방법은 AVR에서 Sag 발생기인 IPC에 입력한 후, IPC에서 전압의 크기와 시간을 조정하여 실험기기에 순간전압 강하를 발생하였다 실험기기는 PLC, 전자접촉기, 400[W]고압방전램프를 시험하였다. PLC시험에서 무부하와 정격부하에 따라 특성 의 변화가 생겼으며, 정격부하에서 Voltage Sag의 영향을 더 받았다 전자접촉기의 시험은 위상을 $0^{\circ},\;30^{\circ},\;60^{\circ},\;90^{\circ}$로 변화하여 Voltage Sag 발생시켜 계측하였으며, 위상의 변화에 따라 특성곡선이 변화하였다. 고압방전램프시험은 고압나트륨램프와 수은램프, 메탈헬라이드에 Voltage Sag를 발생시켰다. 방전램프의 시험결과 고압나트륨램프의 특성곡선이 가장 안정적으로 나타났다. 본 실험을 통해 순간전압저하에 대한 저압기기의 특성을 실험적으로 입증하여 전력시스템의 설계에 영향을 미칠 것이라 기대된다.

  • PDF