• Radiation Oncology Journal
• /
• v.7 no.1
• /
• pp.85-92
• /
• 1989

Dosimerty based on electron spin resonance (ESR) analysis of radiation induced free radicals in amino acids is relevant to biological dosimetry applications. Alanine detectors are without walls and are tissue equivalent. Therefore, alanine ESR dosimetry looks promising for use in the therapy level. The dose range of the alanine/ESR dosimetry system can be extended down to 1 Gy. In water phantom the absorbed dose of electrons generated by a medical linear accelerator of different initial energies $(6\~21MeV)$ and therapeutic dose levels (1~60 Gy) was measured. Furthermore, depth dose measurements carried out with alanine dosimeters were compared with ionization chamber measurements. As the results, the measured absorbed doses for shallow depth of initial electron energies above 15 MeV were higher by$2\~5\%$ than those calculated by nominal energy $C_E$ factors. This seems to be caused by low energy scattered beams generated from the scattering foil and electron cones of beam projecting device in medical linear accelerator.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.12
• /
• pp.2410-2416
• /
• 2016

Recently, most countries in the world have pursued a denuclearization. So it has been of interest to increase to Nuclear weapon in such as North Korea's continued nuclear test. Pulsed gamma rays produced in the nuclear explosion and the space environment can give the big damage to the electronic device in a very short period of time. To confirm the extent of damage of these electronic devices, pulsed gamma irradiation facility that can occur in nuclear weapon or space environment are required. In this paper, we implemented the pulsed gamma-ray detection module and analyzed output of the irradiation test. We have experimented using an electron beam accelerator research facilities in Pohang Accelerator similar conditions to equip and Nuclear weapon. As a result, we confirmed that the pulsed gamma rays emitted by the gamma radiation and electron beam conversion device. The results of this paper will contribute to improve the reliability and accuracy of studies for utilizing pulsed gamma rays.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.2
• /
• pp.83-91
• /
• 2008

To design the light control system using the PLC(Power Line Communication) with the ballasts of MH(Metal Halide) lamps, we analyzed the noise effect on the power line by the electronic ballast. For the power line characteristics are changed by the loads, the ballast have to be designed to be suitable to the PLC. Therefore, this paper proposed the optimal ballast and designed two kinds of PLM(Power Line Modem) which one is ASK type and the other is FSK type. Two type of PLM have used the manchester codes or DS/SS code. Experimental results have shown that the FSK type modem by the DS/SS coding technique have the best characteristics.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.3
• /
• pp.433-437
• /
• 2005

Electron beam irradiation was applied to examine the microbial safety and qualities of sliced dried squid. Sliced dried squid was irradiated at dose of 2, 4, 8, 12, and 16 kGy. Microorganisms contaminated in sliced dried squid were significantly decreased by irradiation. Decimal reduction dose (D/sub 10/ value) of total bacteria count, yeast and mold, coliforms in sliced dried squid were 8.57, 4.60, and 8.10 kGy, respectively. Electron beam irradiation caused negligible changes in Hunter color L, a, and b value. Sensory evaluations of irradiated sliced dried squid showed that there were no significant changes among the samples. These results indicate that electron beam irradiation improves the microbial safety and qualities of sliced dried squid.

• Korean Journal of Food Science and Technology
• /
• v.37 no.2
• /
• pp.308-311
• /
• 2005

Electron beam irradiation was applied to examine microbial safety and qualities of black pepper powder and commercial Sunsik. Whole black pepper powder and commercial Sunsik were irradiated at 2, 4, 8, 12, and 16 kGy. Microorganism contamination in black pepper powder and commercial Sunsik were significantly decreased by irradiation. Decimal reduction doses ($D_{10}\;value$) of total bacteria count in black pepper powder and commercial Sunsik were 5.32 and 1.56 kGy, respectively. $D_{10}\;value$ of yeast and mold were 2.54 and 2.14 kGy for black pepper powder and commercial Sunsik, respectively. Electron beam irradiation caused negligible changes in Hunter color L, a, and b values. Sensory evaluations of black pepper powder and commercial Sunsik showed no significant changes among samples. These results indicate electron beam irradiation improves microbial safety and qualities of black pepper powder and commercial Sunsik.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.237-237
• /
• 2009

전도 특성을 가지는 나노선 제작의 연구가 활발하게 진행되고 있다. 본 실험에서는 높은 전도성을 가지는 구리 이온을 이용하여 나노선을 제작하는 실험을 진행하였으며 제작된 구리-나노선의 전도특성을 분석하여 구리 이온 치환 정도에 따른 DNA 전도성 개선 여부를 확인하였다. DNA를 기반으로 구리 Metalization 횟수가 늘어날수록 나노선이 연속적으로 형성되며 선형적이고 높은 전도특성을 가지게 되는 것을 확인할 수 있었다. 이 결과로부터 본 연구에서 사용한 방법을 이용하여 제작된 구리 나노선이 향후 나노소자 제작에 크기 기여할 것으로 기대한다.

• Progress in Medical Physics
• /
• v.5 no.2
• /
• pp.13-20
• /
• 1994

The thermoluminescence(TL) glow curves and the optical absorption of $Al_2O_3$ irradiated with ${\gamma}$-ray, electron, and $Li^{+}$ ion followed by electron irradiation have been investigated to determine the relation of TL peak to its defect type. The TL glow curve of $Al_2O_3$ irradiated with ${\gamma}$-ray shows TL peaks at 380 K, 415 K, and 475 K. The UV photobleached TL glow curve of $Al_2O_3$ irradiated with ${\gamma}$-ray shows that the 380 K and 475 K TL peaks completely disappear while the 415 K TL peak still exists. The electron beam induced TL glow curve of $Al_2O_3$ after $Li^{+}$ ion implantation shows that the TL peak at 440 K is enhanced by a factor of 2 over the TL intensity of unimplanted $Al_2O_3$ while the TL peak at 380 K evidently disappears The implanted $Li^{+}$ ions are assumed to form singly charged interstitial cations and then recombine with electron trapped in F centers to produce F+ centers. The 380 K and 475 K TL peaks are proposed to be associated with F center, while the 415 K and 440 K TL peak are connected with F$^{+}$ center.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.17-18
• /
• 2005

실리콘 기판 위에 100nm의 선폭을 갖는 선들이 일정한 간격을 가지고 연속적으로 배열되어 있는 구조를 형성시켜 보았다. PMMA가 코팅되어 있는 실리콘 기판위에 전자빔으로 패턴을 하였고, 건식에칭을 통해 구조물을 형성한 후 원자 현미경으로 관찰하였다. 이러한 나노구조물의 구현은 전자빔 패터닝시에 전자빔이 실리콘 기판에 충돌할 때 나타나는 backward scattering과 proximity 효과 등의 영향으로 인해 pitch의 크기가 작아질수록 구현하기가 쉽지 않았다. 화합물반도체 단일 나노선 소자를 제작하여 소자의 전기적 특성을 측정할 때, 나노선 표면에 있는 자연산화막은 금속전극과 나노선 사이의 전기전도특성을 저해하는 요소로 알려져 있다. 이러한 자연산화막을 제거하기 위해 나노선을 건식에칭해 보았고, 원자현미경을 통해 에칭에 따른 나노선의 모양변화를 관찰하였다.

• The Journal of Korean Society for Radiation Therapy
• /
• v.20 no.2
• /
• pp.103-107
• /
• 2008

Purpose: This paper describes a electron field presence of magnetic field, intensity and shape surface dose variation to clinical application possibility. Materials and Methods: The using 6 MeV electron and $10{\times}10\;cm^2$ field size, 9 hole to shielding block make the by measure the film, when the magnetic field position inside and outside of the X-Omat film and parallel plate ionization chamber using the surface dose measured. Results: Present of 4 cm to the side at angle about 3 degree from beam center, use of ring type magnetic is 0.9% increase the surface dose, lens block located in the magnetic field the surface dose 1.58% increase, half magnetic field's position on the side of them at the field center of the 3.6% increase of the surface dose. Conclusion: Surface dose variation is with magnetic field about the mean electron beam of progress direction change, orbit region patient's is inconvenient without surface dose increase percentage case goodness will be used as a useful way.

• Progress in Medical Physics
• /
• v.13 no.4
• /
• pp.202-208
• /
• 2002

The purpose of this study is to evaluate the monitor unit obtained from various methods for the treatment of superficial cancers using electron beams. Thirty-three breast cancer patients who were treated in our institution with 6, 9, and 12 MeV electron beams, were selected for this study. For each patient, irregularly shaped treatment blocks were drawn on simulation film and constructed. Using the irregular blocks, monitor units to deliver 100 cGy to the dose maximum (dmax) were calculated from measurement and three-dimensional radiation treatment planning (3D RTP) system (PINNACLE 6.0, ADAC Laboratories, Milpitas CA) Measurements were made in solid water phantom with plane parallel (PP) chamber (Roos, OTW Germany) at 100 cm source-to surface distances. CT data was used to investigate the effect of heterogeneity. Monitor units were calculated by overriding CT values with 1 g/㎤ and in the presence of heterogeneity. The monitor unit values obtained by the above methods were compared. The dose, obtained from measurement in solid water phantom was higher than that of RTP values for irregularly shaped blocks. The maximum differences between monitor unit calculated in flat water phantom at gantry zero position were 4% for 6 MeV and 2% for 9 and 12 MeV electrons. When CT data was used at a various gantry angle the agreement between the TPS data with and without density correction was within 3% for all energies. These results indicate that there are no significant difference in terms of monitor unit when density is corrected for the treatment of breast cancer patients with electrons.