Kim, Myeong-Seop;Im, Jeong-U;Go, Yeong-Hwan;Jeong, Gwan-Su;Yu, Jae-Su
Proceedings of the Korean Vacuum Society Conference
/
2012.08a
/
pp.338-338
/
2012
사파이어 ($Al_2O_3$)는 높은 밴드갭 에너지 (~19.5 eV)를 가진 물질로서 우수한 내마모성, 강도, 전기 절연성 및 안정한 화학적 특성을 갖고 발광다이오드 기판, 보석재료 등 각종 산업 및 기술적 분야에서 널리 사용되고 있다. 특히, 플립칩 발광다이오드 구조의 경우 광추출효율을 향상시키기 위해 높은 투과도를 갖는 사파이어 기판이 요구되어 왔으며, 지금까지 건식/습식식각방법을 이용한 사파이어 표면에 마이크로 크기의 심한 거칠기 또는 요철이 형성된 나노크기의 격자구조를 형성시키는 연구가 진행되어 오고 있다. 그 중, 나노 크기의 격자구조는 공기에서 반도체 기판까지 선형적인 유효굴절률 분포를 갖기 때문에 표면에서 생기는 Fresnel 반사 손실을 줄일 수 있다. 이러한 구조를 형성하기 위해서는 식각 마스크가 필요한데, 형성 방법으로 레이저 간섭 리소그래피, 전자빔 리소그래피, 나노임프린트 리소그래피 등이 있으나, 비싼 가격과 복잡한 공정 절차 등의 단점을 지니고 있다. 따라서 본 연구에서는 식각 마스크 패턴을 위해, 보다 저렴하고 간단한 실리카 나노구 및 열적응집 금 나노 입자를 이용하였다. 양면 폴리싱 c-plane 사파이어 기판을 사용하였고, 단일 층의 주기적인 실리카 나노구를 기판 표면에 스핀코팅에 의해 도포한 후 유도결합플라즈마 식각 장비를 이용하여 식각하여 주기적인 패턴을 갖는 렌즈모양의 격자구조를 형성하였다. 그리고 주기적으로 형성된 격자 위에 열 증착기를 이용하여 금 박막을 증착한 후 급속열적어닐닝(rapid thermal annealing)을 이용하여 열처리함으로써 비주기적인 금 나노입자를 형성시켰다. 형성된 금 나노패턴을 이용하여 동일한 조건으로 식각함으로써 광대역 및 전방향성 높은 투과도를 갖는 원뿔 모양의 사파이어 나노구조를 제작하였다. 제작된 샘플의 패턴 및 식각 형상은 전자현미경을 사용하여 관찰하였으며, UV-vis-NIR 분광광도계 (spectrophotometer)를 사용하여 투과율을 측정하였다. 렌즈 모양 표면 위에 원뿔모양의 나노구조를 갖는 사파이어 기판은 일반적인 사파이어 기판보다 향상된 투과율 특성을 보였다.
Journal of the Korean Society for Precision Engineering
/
v.24
no.4
s.193
/
pp.153-158
/
2007
Recently nano imprint lithography to fabricate photonic crystal on polymer is preferred because of its simplicity and short process time and ease of precise manufacturing. But, the technique requires the precise mold as an imprinting tool for good replication. These molds are made of the silicon, nickel and quartz. But this is not desirable due to complex fabrication process, high cost. So, we describe a simple, precise and low cost method of fabricating PDMS stamp to make the photonic crystals. In order to fabricate the PDMS mold, we make the original pattern with designed hole array by finding the optimal electron beam writing condition. And then, we have tried to fabricate PDMS mold by the replica molding with ultrasonic vibration and pressure system. We have used the cleaning process to solve the detaching problem on the interface. Using these methods, we acquired the PDMS mold for photonic crystals with characteristics of a good replication. And the accuracy of replication shows below 1% in 440nm at diameter and in 610nm at lattice constant by dimensional analysis by SEM and AFM.
Electron beam on high energy acceleration, which travels deeply and sharply through photoresist, became to be used in e-beam lithography apparatus for nano-patterning in due to its high resolution. An advanced electron beam lithography simulation tool is currently undergoing development for nano-patterning. This paper will demonstrate such simulation efforts with experiments at 200 keV e-beam lithography processes on PMMA, ZEP520 of which photoresist parameters and characteristics will be explained with simulation results. Neureuther parameters was extracted from the contrast curve of the resist
O, Sang-Cheol;Yang, Gi-Yeon;Han, Gang-Su;Lee, Heon
Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
/
2010.06a
/
pp.63-63
/
2010
나노 구조를 제작은 나노 기술을 기반으로 하는 electronics, optoelectronics, sensing, ultra display등의 여러 분야에서 이용되고 있다. 특히 나노 구조를 갖는 금속 패터닝의 경우 전자빔 리소 그래피 (electron beam lithography)나 레이저 패터닝(laser patterning)과 같은 방법들이 많이 사용되고 있다. 하지만 공정이 복잡하고 그로 인해 공정 비용이 많이 든다는 단점이 있었다. 나노 임프린트 리소그래피 기술은 master mold 표면의 나노 패턴을 가열, 가압 공정을 통해 기판 위의 고분자 레지스트 층으로 전사하는 기술이다. 이 기술은 간단한 공정을 통해 나노 패턴을 형성할 수 있는 기술이기 때용에 차세대 나노 패터닝 기술로써 각광받고 있다. 특히 이 기술은 레지스트 층과의 직접적인 접촉을 통해 나노 패턴을 형성하기 때문에 다양한 방법을 통해 기능성 나노 패턴을 직접적으로 형성할 수 있는 가능성을 지니고 있다. 본 연구는 novel meta1의 하나인 Ag 입자가 첨가된 ink solution를 master mold로부터 복제한 PDMS mold를 이용하여 다양한 구조의 나노 패턴을 만드는 방법에 대한 연구이다.
Kim, Sung-O;Lee, Jin;Lee, Kyung-Sup;Lee, Duck-Chool
Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
/
1999.05a
/
pp.575-577
/
1999
In this study, the PPPI(Plasma Polymerized Phenyl Isothiocyanate) resist thin film was manufactured in accordance with the plasma polymerization method and after exposing it to an electron beam, a pattern was formed by plasma etching. With the FT-IR(Fourier transform-infrared spectrometry) analysis, it was confirmed that the PI(Phenl Isothiocyanate) monomer was successsfully produced into a thin film by the plasma. The polymerization rate of the thin film was 450~ 1012($\AA$/min) to 100-200(W) discharge power and 120-12($\AA$/min) to 0.1 ~0.4[torr] system pressure.
The aim of this paper is to describe the development of the electron-beam optic analysis algorithm for simulating the e-beam behavior concerned with electrostatic lenses and their focal properties in the micro-column of the multi-beam lithography system. The electrostatic lens consists of an array of electrodes held at different potentials. The electrostatic lens, the so-called einzel lens, which is composed of three electrodes, is used to focus the electron beam by adjusting the voltages of the electrodes. The optics of an electron beam penetrating a region of an electric field is similar to the situation in light optics. The electron is accelerated or decelerated, and the trajectory depends on the angle of incidence with respect to the equi-potential surfaces of the field. The performance parameters, such as the working distances and the beam diameters are obtained by the computational simulations as a function of the focusing voltages of the einzel lens electrodes. Based on the developed simulation algorithm, the high performance of the micro-column can be achieved through optimized control of the einzel lens.
Proceedings of the Korean Vacuum Society Conference
/
2011.02a
/
pp.339-339
/
2011
기존의 광학리소그래피방법으로는 나노크기의 패턴을 형성하는데에 있어서 많은 제약이 있으며, 사실상 수십나노크기의 패턴을 형성하는데에는 전자빔리소그래피등 새로운 패턴형성 방법이 요구되고 있다. 블록 공중합체를 이용한 나노 패턴은 서로 다른 화학적 구조를 가지는 고분자들이 공유결합으로 연결되어 있는 분자구조를 이용하여, 하나의 분자 내에 서로 다른 블록들이 상분리를 일으키려는 것과 동시에 이들의 공유결합으로 인해 그 정도가 제한되는 것을 이용하여 라멜라, 실린더, 구 등의 주기적으로 배열된 형태의 구조물을 형성하는 패터닝 기술이다. 블록 공중합체를 이용한 나노크기의 패턴 형성은 열역학적으로 안정적인 구조이며, 대면적으로 구현 할 수 있어서 차세대 소자제작을 위한 제작기술로 많은 관심을 가지고 있다. 하지만 블록공중합체를 이용한 나노패턴 기술은 선행적으로 나노구조체를 결함이 없고, 원하는 형태로 제작 할 수 있는 공정의 확립이 필요하다. 따라서 본 연구에서는, 이러한 블록 공중합체을 이용한 나노패턴을 제조하는 공정에서, 폴리스틸렌과 실리콘 산화물 박막과의 표면반응을 막기 위한 Self-Assembly Monolayers (SAMs) 처리 공정이 패턴 형성에 미치는 영향을 알아보기 위하여 MPTS의 농도 및 처리시간을 변화시켰다. 나노패턴을 분석, 확인하기 위하여 Atomic Force Microscopic (AFM)과 Field Emission Scanning Electron Microscope (FESEM)을 이용하였다.
A computationally efficient and accurate Monte Carlo (MC) simulator of electron beam lithography process, which is named SCNU-EBL, has been developed for semiconductor nanometer pattern design and fabrication. The simulator is composed of a MC simulation model of electron trajectory into solid targets, an Gaussian-beam exposure simulation model, and a development simulation model of photoresist using a string model. Especially for the trajectories of incident electrons into the solid targets, the inner-shell electron scattering of an target atom and its discrete energy loss with an incident electron is efficiently modeled for multi-layer resists and heterogeneous multi-layer targets. The simulator was newly applied to the development profile simulation of ZEP520 positive photoresist for NGL(Next-Generation Lithography). The simulation of ZEP520 for electron-beam nanolithography gave a reasonable agreement with the SEM experiments of ZEP520 photoresist.
Proceedings of the Korean Vacuum Society Conference
/
2016.02a
/
pp.346.1-346.1
/
2016
본 연구에서는 열처리(Thermal Dewetting Process)와 빗각 증착(Oblique angle deposition)을 이용하여 비주기 서브파장 구조물을 마이크로 렌즈 형태의 유리 기판 상부에 제작하였다. 먼저 $2{\times}2cm2$ 크기의 유리 기판에 기존 리소그래피 공정으로 원기둥 형태의 감광액을 형성한다. 이후 Hot-plate로 $180^{\circ}C$에서 90초간 열을 가해 지름이 $20{\mu}m$인 반구형태로 변형시킨 뒤 반응성이온식각 공정을 진행하여 마이크로 렌즈를 제작한다. 렌즈의 표면에 나방 눈 구조를 형성하기 위해 전자빔 증착으로 15nm의 은 박막을 쌓은 뒤 $500^{\circ}C$에서 1분간 열처리 공정을 진행하였다. 열이 가해졌을 때 은 박막은 표면자유에너지를 최소화하기 위해 나노 크기의 덩어리진 입자 형태로 변화한다. 여기서 형성되는 나노입자의 크기가 렌즈 표면 중심에서 가장자리로 갈수록 작아진다는 것을 주사전자현미경을 통해 확인하였다. 증착 각도가 증가할수록 열처리 공정 후의 은 나노입자의 크기가 점점 작아진다는 것을 검증하기 위해 은 박막의 증착 각도를 $0^{\circ}$, $35^{\circ}$, $55^{\circ}$, $70^{\circ}$로 증착 후 열처리 공정을 진행하여 확인하였다. 비스듬하게 증착되어 형성된 박막은 다공형태로 낮은 밀도를 가지는데 이는 박막 두께 감소를 일으킨다. 따라서 증착 각도가 증가할수록 열처리 공정 후의 은 나노입자의 크기는 점점 작아진다. 이후 은 나노입자를 마스크로 하여 다시 반응성이온식각 공정을 진행하였으며 식각 후 나머지 은 나노입자들은 HNO3용액에서 1분간 처리하여 제거하였다. 제작된 구조물의 평균 직경과 크기는 각각 ~220nm 및 ~250nm인 것으로 확인하였다. 위와 같은 공정을 통해 다양한 크기를 가진 비주기 서브파장 구조물을 제작할 수 있다. 구조물의 주기가 파장 길이보다 짧을 경우 분산이 최소화되며 넓은 파장 대역에서 무반사 효과를 얻을 수 있다. 이 공정은 마스크를 통한 리소그래피의 한계를 극복할 수 있으며 여러 곡면형 표면에 적용가능한 장점이 있다. 또한 프리즘, 렌즈, 광섬유와 같은 광소자의 광투과율을 향상시키는데 이용될 수 있다.
An, Ho-Myoung;Seo, Young-Ho;Yang, Won-Jae;Kim, Byungcheul
Journal of the Korea Institute of Information and Communication Engineering
/
v.18
no.9
/
pp.2197-2202
/
2014
In this paper, we report on an investigation of highly sensitive sensing performance of a hydrogen sensor composed of palladium (Pd) nanowires. The Pd nanowires have been grown by electrodeposition into nanochannels and liberated from the anodic aluminum oxide (AAO) template by dissolving in an aqueous solution of NaOH. A combination of photo-lithography, electron beam lithography and a lift-off process has been utilized to fabricate the sensor using the Pd nanowire. The hydrogen concentrations for 2% and 0.1% were obtained from the sensitivities (${\Delta}R/R$) for 1.92% and 0.18%, respectively. The resistance of the Pd nanowires depends on absorption and desorption of hydrogen. Therefore, we expect that the Pd nanowires can be applicable for detecting highly sensitive hydrogen gas at room temperature.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.