• Information and Communications Magazine
• /
• v.34 no.5
• /
• pp.19-26
• /
• 2017

Electromechanical Brake(EMB)시스템은 유압 대신 전동식 액츄에이터를 이용하여 제동력을 발생시키는 브레이크 장치인 Brake-by-Wire(BBW) 시스템의 구성요소 이다. EMB 시스템은 기존 유압식 브레이크 시스템과 비교하여 친환경적이며, 설계의 자유도가 높고, 제동 응답성 및 제어 성능이 뛰어난 장점을 가진다. 하지만 전자 전기적으로 시스템 구성이 복잡해 짐에 따라 고장에 대한 안정성 부문이 설계시 충분히 고려되어야 한다. 본 논문에서는 차량 EMB 시스템 설계시 신뢰성을 향상을 위해 고려해야 설계 방안에 대해서 기술한다. 크게 시스템, 센서, 모터 분야에 대해 고장 요소 및 대처 방안 설계에 대해 개괄적으로 소개한다.

• KIPS Transactions on Software and Data Engineering
• /
• v.6 no.4
• /
• pp.167-176
• /
• 2017

There are increasing policies and safeguards to prevent various human resource losses with the development of automotive industry. Currently ISO26262 $1^{st}$ edition has been released in 2011 to ensure functional safety of electrical and electronic systems and the $2^{nd}$ edition will be released in the second half of 2016 as part of a trend. The E/E (Electrical & Electronics) system requirements verification is required through walk-through, 인스펙션, semi-formal verification and formal verification in ISO 26262. This paper describe the efficiency of model checking for the E/E system requirements verification by applying the product development project of ASIL (Automotive Safety Integrity Level) D for the electrical parking brake system.

• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.1836-1837
• /
• 2006

본 논문에서는 차량용 전자제어식 주차 브레이크(Electric Parking Brake, EPB) 시스템의 고장 허용 제어(fault tolerant control)를 위한 고장 안전 기법(fail-safe logic)을 제안한다. 고장 안전 기법의 구현을 위하여 EPB 구동 모터에 흐르는 전류 리플을 측정하여 센서리스 위치 추정을 한다. 추정값과 홀 센서의 출력을 비교하여 잔차(residual)를 발생하고, 이를 이용하여 시스템 내부의 고장을 진단하고 고장 안전 기법을 통하여 전체 시스템의 오작동을 방지한다. 시스템 오작동을 방지하기 위한 고장 안전 기법에 대하여 정의하고 모의실험을 통하여 내부 시스템의 고장이 발생 시 이 기법이 고장을 진단하고 시스템을 안전하게 운영할 수 있음을 확인하였다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.23 no.10
• /
• pp.1254-1264
• /
• 1999

A three-dimensional coupled turbulent fluid flow and solidification process were analyzed in a continuous casting process of a steel slab with Electromagnetic Brake(EMBR). A revised low-Reynolds number $k-{\varepsilon}$ turbulence model was used to consider the turbulent effects. The enthalpy-porosity relation was employed to suppress the velocity within a mushy region. The electromagnetic field was described by Maxwell equations. Tile application of EMBR to the mold region results in the decrease of the transfer of superheat to the narrow face, the increase of temperature in free surface region and most liquid of submold region, and the higher temperature gradient near the solidifying shell. The increasing magnetic flux density effects mainly to the surface temperature of the solidifying shell of narrow face, hardly to the one of wide face. It is seen that in the presence of EMBR a thicker solidifying shell is obtained at the narrow face of the slab.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.10a
• /
• pp.94-98
• /
• 2013

Transfer Path Analysis (TPA) is commonly used, by car makers and parts suppliers, analysis process to root the cause of NVH problems. In general, TPA is an analyzing technique to find the contributing factors of noise/vibration problems, and their transfer path in vehicle. However, not only TPA is used to analyze the source of NVH problems but also is used to predict NVH performance prior to the proto vehicle, or to set the development target for next new vehicle. Automotive parts manufacturing companies have to set NVH performance target when developing new systems just as car makers have NVH target set for new vehicle. Nevertheless, most of components are currently being developed based on subjective evaluation without an objective target. To judge the suitability of using TPA to set NVH target of electric parking brake, this research analyzed the transfer path by setting them in two points of view; Chassis Module and Electric Parking Brake, and comparing the measured value and calculated value. From this result, NVH target of electric parking brake will be approached in level of vehicle, system and component.

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.11
• /
• pp.977-982
• /
• 2015

This study uses finite element analysis to evaluate the forming load of tool entrance angle of the cold forward extrusion molding process of helical gear; this can replace the spur gear applied to the Electronic Parking Brake (EPB) system. A cold forging process is often used in the automobile industry as well as in various industrial machines due to its high efficiency. Finite element analysis is frequently used when interpreting results of the forging process. Formality was evaluated by calculating tooth profile filling rate of helical gear. Change in required forming load was investigated when the entrance angle of forward extrusion tool die was changed from $30^{\circ}$ to $60^{\circ}$, also by finite element analysis. We suggest suitable tool entrance angles.

• Journal of IKEEE
• /
• v.25 no.1
• /
• pp.116-127
• /
• 2021

In this paper, we propose simultaneous control which improve in transient state performance of mechanical parking facilities through simultaneous control of PLC and inverter. In conventional mechanical parking facilities, it is controlled only by PLC, and it is more likely to generate over-currents in induction motors, and the ride comfort is reduced due to wear and damage caused by friction on the brake pads, and the life is shortened. To improve this problems the application of control techniques through simultaneous control of PLC and inverter prevents over-currents in induction motors, protects brake pads, improves ride comfort, increases control and ensures safety. We verify its validity by applying the proposed control method via simultaneous control of PLC and inverter to a mechanical parking facility.

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.539-540
• /
• 2011

본 논문에서는 건설기계 및 운반기계, 차량의 유압장치(브레이크, 클러치 및 파워 스티어링 시스템)로 널리 사용되어지고 있는 외접기어펌프의 치형을 Involute 기어형식으로 설계하였다. 상용프로그램인 Pumplinx 프로그램을 통해 이 기어를 해석하여 효율 및 성능을 알아보았다.

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.245-246
• /
• 2014

본 논문에서는 외전형 영구자석 동기 전동기의 전기적 브레이크 동작 시에 발생하는 회생 에너지를 분석한다. 그리고 전류 정보 없이 전동기 속도 및 배터리의 전압만으로 회생 전력을 제어하는 방법을 제안한다. 후륜 허브 전동기를 가지는 자전거 프로토 타입을 제작하고, 제안하는 회생 제동 제어 기법을 적용한 실험을 통해 제안 기법을 검증한다.

• Proceedings of the KIPE Conference
• /
• 2018.11a
• /
• pp.183-184
• /
• 2018

본 논문에서는 능동댐핑을 이용하여 영구자석 동기전동기(PMSM)의 회생 제동 시 기계적 마찰력을 이용한 브레이크와 같은 제동특성을 얻으면서도 최대한의 회생에너지를 얻을 수 있는 기법에 대하여 제안한다. 능동댐핑의 이득 값을 조정하여 가상으로 마찰력을 조정하였으며 최대회생이 가능한 이득 값의 기준을 정의하고, 시뮬레이션을 통해 가상 마찰력의 변화에 따른 감속 궤적 및 PMSM의 출력전력 변화를 확인하였다.