• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.1
• /
• pp.55-61
• /
• 2011

In this paper, the outage probability of device-to-device (D2D) uplink communication underlaying cellular networks is analyzed over Rayleigh fading. We assume that a D2D pair and M cellular user equipments share the same frequency resources. To prevent any harmful interference from a D2D transmitter to the BS, the maximum transmit power of the D2D transmitter is strictly limited. Under these assumptions, the outage probability is represented as a function of the interference-to-signal ratio from M cellular user equipments to a D2D receiver and the number of cellular user equipments, M. In addition, the interference-to-signal ratio is represented as a function of distances among D2D equipments, cellular user equipments and the BS. Simulation results validate these analytical results.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.3
• /
• pp.162-170
• /
• 2015

In the bandpass sampling (BPS), the sampling frequency is lower than the frequency of the signal to be sampled. In this method, the baseband spectrum can be directly obtained by the sampling operation. This makes the frequency down converter unnecessary as well as the receiver's circuit simpler. In the second-order BPS system, two sampling devices are used. When aliasing occurs due to the sampling operation, the aliased component can be cancelled by combining the two sampled signals. In this paper, it is presented a design method of the second-order BPS system when multiple interferences are simultaneously aliased to the signal component. The optimum phase of the interpolant filter is searched for maximizing the signal-to-interference ratio, and a practical formula for the suboptimal phase is derived in terms of the power spectrum profile of the BPS input. A computer simulation has been performed for the proposed second-order BPS system, and it has been shown that the signal-to-interference ratio can be increased by considering multiple aliasing.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.2
• /
• pp.53-59
• /
• 2009

In multi-user MIMO systems, a base station transmits multiple data to multi-user simultaneously in order to improve performance and bandwidth efficiency. When the base station transmits multiple data to multi-user simultaneously, multi-user interference occurs severely. In this paper, we define a post-processing leakage as the total power leaked from desired user to all other users after combining at the output of each user. Using concept of the post-processing leakage, we also define a performance metric, the so called signal-to-post-processing-leakage-plus-noise ratio (SPPLNR). Assuming that the receiver is the minimum mean square error (MMSE) receiver, we propose an iterative SPPLNR-based beamforming that determines beamforming vectors and combining vectors by using an iterative method. The proposed scheme does not impose a condition on the relation between the number of transmit antennas for the base station and the number of receive antennas for users. Simulation results show that the proposed scheme outperforms a beamforming scheme perfectly eliminating the multi-user interference when channel estimation error exists.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.1
• /
• pp.37-43
• /
• 2001

In this paper, we propose a new optical security technique using two phase masks based on interferometer. A binary random phase image is used as a reference image and the encrypted image is generated according to the phase difference between the reference image and the original image. If there is no phase difference of a same pixel position in two phase masks, interference intensity of the pixel has minimum value and if phase difference of a same pixel position in two phase masks is $\pi$, its interference intensity has maximum value. We can decrypt the original image by putting two phase masks on each of the two optical paths of the Mach-Zehnder interferometer. Computer simulation and the optical experiments show a good performance of the proposed optical security system.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.12
• /
• pp.103-108
• /
• 1998

The increase in the capacity of the digital magnetic recording systems inevitably causes severe intersymbol interference (ISI) and nonlinear distortions in the digital magnetic recording channel. In this paper, to cope with severe ISI and nonlinear distortions a neural decision feedback equalizer (NDFE) is applied to the digital magnetic recording channel - partial erasure channel model. In the performance comparison of bit error probability (or bit error ratio : BER) between the NDFE and the conventional decision feedback equalizer (DFE) via computer simulations. It has been found that as nonlinear distortions increase the NDFE has more SNR (SIgnal-to-Noise Ratio) advantage over the conventional DFE. In addition, in spite of the same recording density, as nonlinear distortions are increased, NDFE has the better performance of BER and the greater stability over conventional DFE.

• Proceedings of the Optical Society of Korea Conference
• /
• 2002.07a
• /
• pp.16-17
• /
• 2002

최근 3-준위 원자계에서 원자 결맞음에 관련된 현상에 대해 많은 연구가 이루어지고 있다. 전자기 유도 투과, 전자기 유도 흡수, 밀도 반전 없는 레이저 발진, 선폭이 좁은 공진에 의한 큰 굴절률의 실현, 저광속, 초광속, 초저온 원자 냉각 현상들은 원자 결맞음과 관련된 현상들이다. 3준위 원자계는 계단형, V 형, ∧ 형으로 분류할 수 있는데, ∧ 형의 3준위 원자계는 바닥상태간의 간섭성이 오래 지속될 수 있으므로 ∧ 형의 3준위 원자계가 실질적으로 많이 연구되고 있다. (중략)

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.02a
• /
• pp.206-207
• /
• 2003

전자기 유도 투과(electromagnetically induced transparency ； EIT)는 원자의 공명 진동수를 갖는 조사광이 원자 매질을 통과할 때, 강한 결합광에 의한 효과로 매질에 흡수되지 않고 투과하는 양자 간섭 효과로써 원자결맞음 현상의 가장 대표적인 현상 중의 하나이다. EIT 현상은 Boller 등에 의해서 고출력 펄스 레이저를 이용하여 Strontium 증기에서 처음 관측된 이후, 여러 가지 원자와 분자의 증기 셀, 원자 빔, 고체, 냉각된 원자, 그리고 BEC(Bose Einstein condensate)상태에서 다양한 연구들이 이루어지고 있다. (중략)

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.10
• /
• pp.17-26
• /
• 2004

This paper proposes JBSTBC (Joint Beamforming Space-Time Block Coding) scheme for MIMO (Multi-Input Multi-Output) communication systems. To enhance the order of spatial diversity in presence of deteriorative fading correlations as well as inter-substream interferences, the proposed JBSTBC method employs joint eigen-beamforming technique together with the BOLD (block-ordered layered detector) for MIMO-STBC. In order to confirm superiority of the proposed JBSTBC method, the computer simulations are conducted in highly correlated fading situations with providing detailed mathematical derivations for clarifying functionality of the proposed scheme.

• Journal of Aerospace System Engineering
• /
• v.16 no.6
• /
• pp.18-23
• /
• 2022

This paper examines the electromagnetic shielding structure of ultra-high frequency (UHF) RF modules used in aircraft. Advances in electrical and electronic technologies have increased the need for electronic equipment in aircraft. High-frequency wireless devices have become integrated circuits in the form of UHF integrated circuits to support a wide range of frequencies and miniaturisation. To ensure the functionality and performance of these integrated devices in aviation, shielding is necessary to prevent unexpected electromagnetic interference, which could be detrimental to aircraft safety. A shield structure was designed to protect the RF chipset from malfunctioning, and the shielding effectiveness was improved through the application of various geometric shapes.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.9
• /
• pp.1201-1207
• /
• 2010

In this study, a fatigue testing system capable of performing load-controlled tension-tension tests for micro-specimens was developed by using an electro-magnetic actuator. Using this system, fatigue testing as well as tensile testing can be performed over a wide range of loading frequencies. Further, a new laser interferometric strain/displacement gage was used during fatigue testing to obtain high-resolution measurements of the cyclic deformation of thin films. Since the testing machine and the displacement gage are stable and show quick responses, the displacement can be measured instantaneously and continuously during fatigue testing, and high-resolution results can be obtained.