• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.11
• /
• pp.737-744
• /
• 2016

The printed circuit heat exchanger (PCHE) is regarded as a promising candidate for advanced heat exchangers for the next-generation supercritical $CO_2$ power generation owing to its high compactness and rigid structure. In this study, an innovative type of PCHE, in which the channel sizes for the heat source fluid and heat sink fluid are different, is considered for analysis. The thermal performance of the PCHE, with supercritical $CO_2$ as the working fluid, is numerically analyzed. The results have shown that the thermal performance of the PCHE decreases monotonically when the channel size of either the heat source channel or the heat sink channel, because of the decreased flow velocity. On the other hand, the thermal performance of the PCHE is found to be almost independent of the spacing between the channels. In addition, it was found that the channel cross sectional shape has little effect on the thermal performance when the hydraulic diameter of the channel remains constant.

• Solar Energy
• /
• v.14 no.2
• /
• pp.39-50
• /
• 1994

Experiments have been conducted to measure the heat transfer coefficient and pressure drop in fluidized bed double pope heat exchangers with smooth tube and longitudinal finned tube. The effect of particle size(alumina beads; do=0.41, 0.54, 0.65, 0.77 mm) and static bed height on the heat transfer coefficient has been evaluated in terms of pumping power. The heat transfer coefficient for the smooth tube and finned tube heat exchangers has been compared with single phase double pipe heat exchanger. Results show that the heat transfer coefficients for the finned tube in $2.96{\sim}3.45$ times higher than the smooth tube. The heat transfer coefficients for the fluidized bed heat exchanger is higher than the single phase heat exchanger for the most of pumping power range tested. The maximum increase in the heat transfer coefficient for fluidized bed is 91.3% for the smooth tube and 127.1% for the finned tube.

• Solar Energy
• /
• v.15 no.3
• /
• pp.127-140
• /
• 1995

This experimental study was carried out to examine the heat transfer characteristics of a 2-dimensional impinging air jet on a flat plate with a set of square rods. The objectives of the study were to investigate the flow and heat transfer characteristics caused by the square rods. Experiment was carried out first without using the rods to establish the baseline heat transfer performance. Then, rods of different widths and clearances were installed to cause the turbulence on the fluid flow. When rods are installed in front of the plate, the acceleration of the flow and the turbulence generation due to the rods and reattachment of the flow seem to contribute to the observed heat transfer augmentation and the heat transfer augmentation increases as the clearance decreases. With wider individual rod the heat transfer coefficient is higher, which is due to the increased acceleration and development of the eddies just before the rods.

• 한국기계연구소 소보
• /
• s.16
• /
• pp.17-28
• /
• 1986

전열교환기는 최근 대형건물 및 생산공장 등의 에너지 다소비 장소의 공기조화설비의 에너지 절감기기로서 크게 각광 받고 있다. 그 중에서도 특히 알루미늄 박판에 실리카-겔 분말을 코팅한 Honey comb형 로터는 현열 및 잠열 즉 전열을 흡수할 수 있어 폐에너지 회수용 전열교환기의 전열소자로서 점차 이용되고 있다. 그러나 국내에서는 현재까지 전열교환기의 핵심부품인 상기 로터를 전량 수입에 의존하여 왔다. 본 연구에서는 백륜공업(주)와 공동출연으로 실리카-겔 분말 코팅된 알루미늄 소재 박판만 수입하여 성형공정 기술을 개선, 향상시켜 국산로터의 시제품을 제작하고 그 성능을 시험하여 수입로터와 비교, 평가하였다. 연구결과, 국산개발 알루미늄 로터 시제품의 전열효율이 수입로터 보다 급배기 조건에 따라 1~5%정도 향상되었다. 또한 알루미늄 로터의 최적운전조건(11-13 r.p.m) 및 급배기 공기량비에 대한 적정조건도 연구결과로 얻어졌다.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.15 no.3
• /
• pp.226-233
• /
• 1986

전열교환기는 최근 대형건물 및 생산공장 등의 에너지 다소비 장소의 공기조화 설비의 에너지 절감 기기로서 크게 각광 받고 있다. 그 중에서도 특히 알루미늄 박판에 실리카-겔 분말을 코팅한 허니컴형 로타는 현열 및 잠열 즉 전열을 흡수할 수 있어 폐 에너지 회수용 전열교환기의 전열소자로서 점차 이용되고 있다. 그러나 국내에서는 현재까지 전열교환기의 핵심부품인 상기 로타를 전량 수입에 의존하여 왔다. 본 연구에서는 백륜공업(주)와 공동출연으로 실리카-겔 분말 코팅된 알루미늄 소재 박판만 수입하여 성형공정 기술을 개선, 향상시켜 국산로타의 시제품을 제작하고 그 성능을 시험하여 수입로타와 비교, 평가하였다. 연구결과 국산개발 알루미늄 로타 시제품의 전열효율이 수입로타보다 급배기 조건에 따라 $1\~5\%$정도 향상되었다. 또한 알루미늄 로타의 최적운전조건$(11\~13\;r.p.m)$ 및 급배기 공기량비에 대한 적정조건도 연구결과로 얻어졌다.

• Solar Energy
• /
• v.14 no.2
• /
• pp.91-101
• /
• 1994

Heat release characteristics of a CaO packed bed reactor which is used for a chemical heat storage device has been studied. We employed Cu-plate fins to release the heat of reaction of the CaO packed bed inside the reactor fast and effectively. Two-dimensional analysis of unsteady state heat flow inside the bed was performed as a function of time and under various conditions of the Cu-plates. It is noted that the time required to release the heat of reaction with Cu fins is reduced more than twice fast compared to that without Cu fins. That was largely dependent upon the number of Cu-plate, as well.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.4
• /
• pp.491-499
• /
• 2010

Heat transfer performance of tube bundles have long been investigated since they were widely used. Most of previous experimental and numerical works for tube bundles were performed with tube diameter in the range of 25~51mm and Reynolds number of $8.000{\leq}Re{\leq}30.000$. Recently, tube bundles with small diameter tube collects interests since the mini-channel tube provides higher compactness. The present work aims to investigate the applicability of previous correlations available in the open literature to the tube bundles with small diameter of 1.5mm and $3.000{\leq}Re{\leq}7.000$. A commercial CFD package was used to analyze the thermal-hydraulic performance of them. The results show that the Zukauskas correlation developed for larger diameter tube and higher Reynolds number are still in good agreement with them within the discrepancy of 4.7%. The analyses also show that the Nuselt number increases with a decrease in the longitudinal pitch.

• Korea Journal of Geothermal Energy
• /
• v.5 no.4
• /
• pp.31-37
• /
• 2009

• Defense and Technology
• /
• no.11 s.225
• /
• pp.86-95
• /
• 1997

이 글에서는 화포의 필요성과 성능향상 한계에 대하여 설명하고, 그 한계를 극복하기 위하여 전기포가 연구되고 있음을 소개하였다. 전기포의 현재 기술수준과 무기체계화를 고려할 때 전열화학포가 가장 유력한 기술임을 제시하였으며 전열화학포의 원리, 종류, 특징, 장단점, 세부소요기술과 그 발전방향을 종합정리하고, 선진국의 연구동향을 정리하여 제시하였다.

• Defense and Technology
• /
• no.12 s.226
• /
• pp.84-95
• /
• 1997

이 글에서는 화포의 필요성과 성능향상 한계에 대하여 설명하고, 그 한계를 극복하기 위하여 전기포가 연구되고 있음을 소개하였다. 전기포의 현재 기술수준과 무기체계화를 고려할 때 전열화학포가 가장 유력한 기술임을 제시하였으며 전열화학포의 원리, 종류, 특징, 장단점, 세부 소요기술과 그 발전방향을 종합정리학, 선진국의 연구동향을 정리하여 제시하였다.