• Title/Summary/Keyword: 전압강하

Search Result 480, Processing Time 0.027 seconds

Load Flow in Distribution Systems Using Object-oriented Approach (객체지향기법을 적용한 배전계통의 조류계산)

  • Park Ji Ho
    • Proceedings of the KIEE Conference
    • /
    • summer
    • /
    • pp.138-140
    • /
    • 2004
  • 전력조류계산은 배전계통관리시스템의 기본적인 기능이다. 객체지향기법은 기존의 절차식 프로그램방식보다 많은 장점이 있다는 것이 증명되었다. 객체지향기법을 적용한 전력조류계산 모델링을 배전계통에 적용한다. 뉴턴-랍손방법에 기초한 객체지향 알고리즘을 구현한다. 뉴턴-랍손법에 기반한 방법은 방사상 배전계통의 전압강하와 전력조류를 계산하기 위하여 배전전력 조류방정식을 사용한다.

  • PDF

Characteristic Analysis of Jeju-Hanam transmission using VSC-HVDC (전압원 HVDC를 이용한 제주-해남 계통 특성 분석)

  • Park, Yong-Hee;Baek, Seung-Taek;Choi, Jun-Young;Han, Byung-Moon
    • Proceedings of the KIEE Conference
    • /
    • 2006.04b
    • /
    • pp.238-240
    • /
    • 2006
  • 논문은 전류원 HVDC로 연계되어 있는 제주-해남 계통을 전압원 HVDC로 연계하였을 경우에 대한 특성 분석에 대해서 기술하고 있다. 기존의 제주-해남 HVDC시스템은 교류계통 전압의 외란에 의해서 전류실패가 발생할 수 있으므로 연계되는 교류계통 모선에 무효전력보상설비들이 설치되어 있다. 따라서 기존의 전류원 HVDC 시스템은 대용량의 전력을 전송할 수 있다는 장점이 있는 반면 추가로 무효전력 보상설비들이 설치가 되어야 한다는 단점이 있기 때문에 최근에 선진국에서는 전압원 HVDC 시스템에 대한 연구가 활발히 진행되고 있다. 전압원 HVDC 시스템은 계통사고 또는 교류전압강하로 인한 전류실패가 발생하지 않고, 무효전력을 HVDC 시스템의 용량내에서 유효전력과 독립적으로 제어될 수 있기 때문에 추가로 무효전력 보강설비가 필요하지 않다는 장점이 있다. 본 논문에서 늘 제주-해남 계통을 전압원 HVDC로 연계하는 모델을 PSCAD/EMTDC를 이용해서 개발하였다. 개발된 시뮬레이션 모델은 전압원 HVDC를 이용해서 제주-해남 계통을 연계하였을 경우에 대한 동특성을 분석하는데 유용하리라 사료된다.

  • PDF

Discharge Characteristics of the Cold Cathode and External Electrode Fluorescent Lamps (냉음극 및 외부전극 형광램프의 방전 특성)

  • Cho Guangsup;Lee Dae H.;Lee Joo Y.;Song Hyuck S.;Gill Doh H.;Koo Je H.;Choi Eun H.;Kim Sang B.;Kim Bong S.;Kang June G.;Cho Mee R.;Hwang Myung G.;Kim Young Y.
    • Journal of the Korean Vacuum Society
    • /
    • v.14 no.1
    • /
    • pp.49-57
    • /
    • 2005
  • The characteristics of current and voltage in a basic discharge experiment are investigated for a cold cathode fluorescent lamp with ballast capacitors attached at both ends of lamp and for a capacitive coupled external electrode fluorescent lamp. In the current-voltage characteristics for a cold cathode fluorescent lamp except ballast capacitors, it is shown that the typical glow discharge with the cathode fall follows after the dark current and Townsend firing discharge. However, in the characteristics for a cold cathode fluorescent lamp including ballast capacitors, the current increases as the voltage increases in the glow discharge region without representing a cathode fall since the most voltage is loaded at two capacitors. The characteristics for the external electrode fluorescent lamp shows the same as that of the cold cathode fluorescent lamp in the respect of glow discharge characters, and the external electrode itself roles the ballast capacitor.

Characterization of Schottky Diodes and Design of Voltage Multiplier for UHF-band Passive RFID Transponder (UHF 대역 수동형 RFID 태그 쇼트키 다이오드 특성 분석 및 전압체배기 설계)

  • Lee, Jong-Wook;Tran, Nham
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.44 no.7 s.361
    • /
    • pp.9-15
    • /
    • 2007
  • In this paper, we present the design of Schottky diodes and voltage multiplier for UHF-band passive RFID applications. The Schottky diodes were fabricated using Titanium (Ti/Al/Ta/Al)-Silicon (n-type) junction in $0.35\;{\mu}m$ CMOS process. The Schottky diode having $4{\times}10{\times}10\;{\mu}m^{2}$ contact area showed a turn-on voltage of about 150 mV for the forward diode current of $20\;{\mu}A$. The breakdown voltage is about -9 V, which provides sufficient peak inverse voltage necessary for the voltage multiplier in the RFID tag chip. The effect of the size of Schottky diode on the turn-on voltage and the input impedance at 900 MHz was investigated using small-signal equivalent model. Also, the effect or qualify factor of the diode on the input voltage to the tag chip is examined, which indicates that high qualify factor Schottky diode is desirable to minimize loss. The fabricated voltage multiplier resulted in a output voltage of more than 1.3 V for the input RF signal of 200mV, which is suitable for long-range RFID applications.

Development of DSP Process-based Artificial-Intelligent Power Quality Equipment for Single-phase Power System (DSP320C6713기반의 인공지능형 단상전력품질 진단기 개발연구)

  • Kwack, Sun-Geun;Chung, Gyo-Bum;Choi, Jae-Ho
    • Proceedings of the KIPE Conference
    • /
    • 2008.06a
    • /
    • pp.66-68
    • /
    • 2008
  • 본 논문은, 전력계통 내의 순시 파형으로부터 전력품질 자동진단을 위한 인공지능형 단상전력품질 진단기를 제안한다. 진단하는 전력품질은 전압강하(Sag), 전압상승(Swell), 과도현상(Transient) 및 전고조파함유율(THD) 이다. 인공지능 구현을 위해서 인공신경망 이론을 이용하였으며, 시뮬레이션 및 TI DSP 320C6713 사용하여 하드웨어를 구현하였다. 인공신경망의 학습을 위하여, 00변전소에서 일년(2007년)동안 측정한 데이터 중에서 Sag, Swell, Transient 특성이 명확히 관측된 150주기의 파형과 정상상태의 50주기 파형으로 구성된 총 200주기의 데이터를 사용하였다. 측정된 파형을 1/60[sec.]마다 256번 샘플링하여, FFT 및 웨이블렛 변환을 시행하여 얻어진 값을 인공신경망 학습에 사용하였다. 상용프로그램 PSIM을 이용하여 인공신경망 학습을 시뮬레이션하였으며, DSP 프로세서를 이용하여 하드웨어로 구현하여 검증하였다.

  • PDF

A Study on South Korea's Power Supply Plan to North Korea (대북 전력공급 방안 연구)

  • Lee, Kang-Wan;Nahm, Chung-Il
    • Proceedings of the KIEE Conference
    • /
    • 2006.07a
    • /
    • pp.137-138
    • /
    • 2006
  • 2005년 3월에 개시된 개성시범공단에 대한 남한으로부터의 전력공급은 우선 22.9kV 배전 방식으로 최대 15MW까지 확보되고 있으며 금년 말까지 154kV송전선이 건설되어 100MW 전력을 개성공단의 완공에 대비하여 공급할 것으로 알려지고 있다. 한편 정부는 작년 7월에 중대발표를 통하여 2GW의 대북 송전을 제안해 놓고 있으나 6자회담의 교착상태로 논의가 중단된 상태에 있다. 본 연구에서는 이상의 두 가지 경우를 연관시켜 기술적/경제적 측면에서 가장 현실적으로 타당하다고 판단되는 몇 개의 대안에 대하여 조류계산, 전압강하, 과도안정도 및 전압안정도 문제 등을 분석하여 주로 남한의 수도권 전력수급 안정에 미치는 영향을 검토하였다.

  • PDF

A Study On the Simulation Analysis of Series and Shunt Active Filter (직병렬 Active Filter의 시뮬레이션 해석에 관한 연구)

  • Kim, A-Rong;Bang, Jong-Hyun;Park, Min-Won;Yu, In-Keun
    • Proceedings of the KIEE Conference
    • /
    • 2005.07a
    • /
    • pp.875-877
    • /
    • 2005
  • 전력시스템의 규모는 날로 증가하고 부하조건 역시 매우 다양해져 많은 수의 전력변환 장치가 사용되고 있으며, 변환장치에 사용되는 비선형성 전력반도체 소자의 사용은 고조파의 발생을 가져온다. 또한 대규모 부하의 초기기동에 의한 전압강하(Voltage Sag)가 일어나게 되어 전력시스템에 좋지 않은 영향을 주게 되며 고조파와 함에 전력의 품질저하 또는 기계적 오작동 등을 가져다 준다. 본 논문에서는 이런 전압, 전류의 전력품질 저하를 보상하기 위해 Active Filter를 적용한 예를 PSCAD/EMTDC 시뮬레이션 프로그램을 이용하여 시스템 해석을 실시하였다. 본 연구를 통해 직 병렬 동시적용 Active Filter의 유용성을 확인할 수 있었다.

  • PDF

A Study On the Simulation Analysis of Series and Shunt Active Filter (직병렬 Active Filter의 시뮬레이션 해석에 관한 연구)

  • Kim, A-Rong;Bang, Jong-Hyun;Park, Min-Won;Yu, In-Keun
    • Proceedings of the KIEE Conference
    • /
    • 2005.07d
    • /
    • pp.3087-3089
    • /
    • 2005
  • 전력시스템의 규모는 날로 증가하고 부하조건 역시 매우 다양해져 많은 수의 전력변환 장치가 시용되고 있으며 변환장치에 사용되는 비선형성 전력반도체 소자의 사용은 고조파의 발생을 가져온다. 또한 대규모 부하의 초기기동에 의한 전압강하(Voltage Sag)가 일어나게 되어 전력시스템에 좋지 않은 영향을 주게 되며 고조파와 함께 전력의 품질저하 또는 기계적 오작동 등을 가져다 준다. 본 논문에서는 이런 전압, 전류의 전력품질 저하를 보상하기 위해 Active Filter를 적용한 예를 PSCAD/EMTDC 시뮬레이션 프로그램을 이용하여 시스템 해석을 실시하였다. 본 연구를 통해 직 병렬 동시적용 Active Filter의 유용성을 확인할 수 있었다.

  • PDF

Fault Diagnosis of a Electrolytic Capacitor for Inverter DC-Link Voltage Smoothing (인버터 직류링크 전압 평활용 전해 커패시터의 고장 진단)

  • Lee, Kwang-Woon
    • The Transactions of the Korean Institute of Power Electronics
    • /
    • v.12 no.5
    • /
    • pp.372-377
    • /
    • 2007
  • This paper proposes a novel fault diagnosis method of a electrolytic capacitor used for DC-link voltage smoothing in adjustable speed drives. The equivalent series resistance (ESR) of the electrolytic capacitor is directly estimated from DC-link voltage and load currents and the status of the electrolytic capacitor is determined from the estimated ESR. To compensate the variation of the ESR owing to temperature variation, diodes are located on the same PCB near the capacitor and the temperature of the capacitor is sensed indirectly from the voltage drop of diodes. Simulation and experimental studies show the effectiveness of the proposed method.

A Fuel Cell System with Z-Source Inverters and Ultracapacitors (Z-소스 인버터와 울트라커패시터를 이용한 연료 전지 시스템)

  • Kim Y.H.;Lee W.Y.;Seo K.M.;Won C.Y.
    • Proceedings of the KIPE Conference
    • /
    • 2006.06a
    • /
    • pp.270-273
    • /
    • 2006
  • 본 논문에서는 연료 전지의 전압 강하 보상을 위해 Z-소스 인버터와 울트라커패시터를 포함하는 연료 전지 시스템을 제안하였다. Z-소스 인버터의 구조는 매우 간단하다. 이는 DC/DC 컨버터의 사용 없이 단순히 스위칭 패턴만을 제어하여 전압을 승압 할 수 있는 특징을 갖는다. 연료 전지 시스템은 연료 전지의 전압 변동시, 또는 부하 변동시 외부적인 영향에 의해서 과도 상태 전압 왜란이 발생할 수 있다. 이를 보상하기 위한 Z-소스 인버터의 다양한 타폴로지가 제안된다.

  • PDF