• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.4
• /
• pp.319-325
• /
• 2007

In case of more than 50km baseline length, the correlation between receivers is reduced. Therefore, there are still some rooms for improvement of its positional accuracy. In this paper, the stochastic modeling of the ionospheric delay is applied and its effects are analyzed. The data processing has been performed by constructing a Kalman filter with states of positions, ambiguities, and the ionospheric delays in the double differenced mode. Considering the medium or long baseline length, both double differenced GPS phase and code observations are used as observables and LAMBDA has been applied to fix the ambiguities. The ionospheric delay is stochastically modeled by well-known 1st order Gauss-Markov process. And the correlation time and variation of 1st order Gauss-Markov process are calculated. This paper gives analyzed results of developed algorithm compared with commercial software and Bernese.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.6_1
• /
• pp.575-581
• /
• 2012

In general, various modeling and estimation techniques have been proposed to extract the tropospheric and ionospheric delays from the GPS CORS. In this study, Kalman filter approach is adopted to estimate the tropospheric and ionospheric delays and the proper modeling for the state vector and the variance-covariance matrix for the process noises are performed. The coordinates of reference stations and the zenith wet delays are estimated with the assumption of random walk stochastic process. Also, the first-order Gauss-Markov stochastic process is applied to compute the ionospheric effects. For the evaluation of the proposed modeling technique, Kalman filter algorithm is implemented and the numerical test is performed with the CORS data. The results show that the atmospheric effects can be estimated successfully and, as a consequence, can be used for the generation of VRS data.

• Journal of Advanced Navigation Technology
• /
• v.22 no.2
• /
• pp.49-56
• /
• 2018

As the energy generated by earthquake, tsunami, etc. propagates through the air and disturbs the electron density in the ionosphere, the perturbation can be detected by analyzing the ionospheric delay in satellite signal. The electron density in the ionosphere is affected by various factors such as solar activity, latitude, season, and local time. To distinguish from the anomaly, therefore, it is required to inspect the normal trend of the ionosphere. Also, as the perturbation magnitude diminishes by distance it is necessary to develop an appropriate algorithm to detect long-distance disturbances. In this paper, normal condition ionosphere trend is analyzed via IONEX data. We selected monitoring value that has no tendency and developed an algorithm to effectively detect the long-distance ionospheric disturbances by using the lasting characteristics of the disturbances. In the end, we concluded the $2^{nd}$ derivative of ionospheric delay would be proper monitoring value, and the false alarm with the developed algorithm turned out to be 1.4e-6 level. It was applied to 2011 Tohoku earthquake case and the ionospheric disturbance was successfully detected.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.33 no.2
• /
• pp.123-129
• /
• 2015

The Kalman filter has been widely used in the kinematic GPS positioning due to its flexibility and efficiency in computational points of view. At the same time, the relative positioning technique also provided the high precision positioning results by removing the systematic errors in the measurements significantly. However, the positioning quality may be degraded following to longer in baseline length. For this case, it is required that the remaining atmospheric effects, such as double-difference ionospheric delay and zenith wet delay, should be properly modeled by examining the characteristics of the stochastic processes. In general, atmospheric effects are estimated with the assumption of random walk, or the first-order Gauss-Markov stochastic process, which requires the precise modeling on the corresponding process noises. Therefore, we determined and provided the parameters for modelling the process noises for atmospheric effects. The auto-correlation functions are empirically determined at first, and then the parameters are extracted from the empirical auto-correlation function. In fact, the test results can be either applied directly, or used as guidance values for the modeling of process noises in the kinematic GPS positioning.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.3
• /
• pp.293-301
• /
• 2011

The ionospheric delay is the largest error source in GPS positioning after the SA effect has been turned off in May, 2000. In this study, we used 44 permanent GPS stations being operated by National Geographic Information Institute (NGII) to estimate Total Electron Content (TEC) based on pseudorange measurements phase-leveled by a linear combination with carrier phases. The Differential Code Bias (DCB) of GPS satellites and receivers was estimated and applied for an accurate estimation of the TEC. To validate our estimates of DCB, changes of TEC values after DCB application were investigated. As a result, the RMS error went down by about an order of magnitude; from 35~45 to 3~4 TECU. After the DCB correction, ionospheric TEC maps were produced at a spatial resolution of $1^{\circ}{\times}1^{\circ}$. To analyze the effect of the number of sites used for map generation on the accuracy of TEC values, we tried 10, 20, 30, and 44 stations and the RMS error was computed with the Global Ionosphere Map as the truth. While the RMS error was 5.3 TECU when 10 sites are used, the error reduced to 3.9 TECU for the case of 44 stations.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.493-496
• /
• 2006

본 논문에서는 원자 시계를 이용한 위성 시계 감시 기법을 제안하고 실시간으로 구현하였다. GPS 수신기 측정치에는 궤도 오차, 이온층 지연, 대류층 지연, 다중경로, 수신기 시계 오차들이 포함되어 있어 감시국에서는 위성 시계 오차가 이러한 오차보다 커지기 전에는 검출하기가 어렵다. 따라서 천천히 변화하는 위성시계 오차를 검출하는데 긴 시간이 소요된다. 이러한 문제를 해결하기 위하여 본 논문에서는 원자시계를 이용하여 수신기 시계오차를 최소화하고, 이중 주파수 측정치를 이용하여 전리층 지연을 제거하는 등 위성 시계 오차 외의 나머지 오차 성분들을 효과적으로 제거하고 남은 오차의 특성으로부터 위성시계의 이상을 감시하는 방법을 제안하였다. 제안한 기법은 윈도우 기반 GUI형태의 소프트웨어로 구현하였고, 원자시계로부터 시각을 제공받는 GPS 수신기로 실시간으로 데이터를 수신하여 그 타당성을 확인하였다. 수신기에 원자시계를 이용함으로써 이상판별을 위한 임계치를 낮출 수 있어 천천히 변화하는 이상을 빨리 검출할 수 있어 이를 일반 사용자가 방송함으로써 사용자의 안전성을 향상시킬 수 있을 것이다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.4
• /
• pp.397-405
• /
• 2008

The position accuracy is primarily dependent on the satellite position and signal delay caused by several elements. To know the effect of the delay on the estimated positions, we simulated GPS raw data (RINEX) with GPS errors using Bernese ver5.0. GPS errors used in this paper are Ionospheric delay, Cycle slip, Troposphere, DOP and Random error. If the baseline is short, the position error according to TEC is not large, since the ionospheric delay effect can be removed by ion-free combination. However, if the baseline is long, 3 dimensional position error up to 10cm is occurred. The 3D position error of coordinates with cycle slip is hardly ever changed up to 60% of cycle slip. Because the simulated cycle slips are equally distributed on satellites, the positioning was not seriously affected by the cycle slip. Also, if percentage of cycle slip is 60%, three dimensional error is sharply increased over 1m. The position error is calculated by using the observation data (2 hours) which was selected by DOP less than 3. And its accuracy is more improved about $3{\sim}4cm$.

• Journal of Cadastre & Land InformatiX
• /
• v.50 no.1
• /
• pp.107-123
• /
• 2020

With stabilization of the recent multi-GNSS infrastructure, and as multi-GNSS has been proven to be effective in improving the accuracy of the positioning performance in various industrial sectors. In this study, in view that SF(Single frequency) GNSS receivers are widely used due to the low costs, evaluate effectiveness of SF Real Time Point Positioning(SF-RT-PP) based on four multi-GNSS surveying methods with RTCM-SSR correction streams in static and kinematic modes, and also derive response challenges. Results of applying SSR correction streams, CNES presented good results compared to other SSR streams in 2D coordinate. Looking at the results of the SF-RT-PP surveying using SF signals from multi-GNSS, were able to identify the common cause of large deviations in the altitude components, as well as confirm the importance of signal bias correction according to combinations of different types of satellite signals and ionospheric delay compensation algorithm using undifferenced and uncombined observations. In addition, confirmed that the improvement of the infrastructure of Multi-GNSS allows SF-RT-SPP surveying with only one of the four GNSS satellites. In particular, in the case of code-based SF-RT-SPP measurements using SF signals from GPS satellites only, the difference in the application effect between broadcast ephemeris and SSR correction for satellite orbits/clocks was small, but in the case of ionospheric delay compensation, the use of SBAS correction information provided more than twice the accuracy compared to result of the Klobuchar model. With GPS and GLONASS, both the BDS and GALILEO constellations will be fully deployed in the end of 2020, and the greater benefits from the multi-GNSS integration can be expected. Specially, If RT-ionospheric correction services reflecting regional characteristics and SSR correction information reflecting atmospheric characteristics are carried out in real-time, expected that the utilization of SF-RT-PPP survey technology by multi-GNSS and various demands will be created in various industrial sectors.