• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.872-873
• /
• 2015

여러 전력기기를 안전성과 편의성 등을 위하여 함(enclosure)에 설치하였을 때, 이러한 제품을 배전반(Switchgear and controlgear assemblies)이라고 한다. 내부에 설치되는 기기들을 서로 접속할 때 전선(cable) 또는 부스바(busbar)를 사용하고 있는데, 사용시 필연적으로 전력손실에 의한 발열로 인하여 배전반 내부온도 및 기기의 온도가 상승한다. 기기에 대한 온도 상승 허용범위는 각 기기의 해당규격에 규정되어 있으며 배전반 규격(고압배전반 : IEC 62271-200 및 SPS-KEMC 2101-0609, 저압배전반 : IEC 61439 series 및 SPS-KEMC 2102-0610)에는 외부접속용 단자 등 배전반 내부에 사용되는 전선 또는 부스바의 온도상승 허용범위가 규정되어 있다. 본 고찰에서는 배전반의 각 정격전류에 따른 전선 또는 부스바의 사이즈, 특히 부스바의 사이즈 및 형상에 따른 온도상승의 영향을 살펴보고자 한다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2009.05a
• /
• pp.144-144
• /
• 2009

본 논문에서는 6가 크롬 도금의 대체 기술 중 하나인 3가 크롬 도금 공정 기술 개발에 있어 도금 소지인 Mg 합금에 온도, 전류 밀도 등의 도금 조건을 변경하여 도금 층의 두께와 형상, 미세조직 등을 분석, 최적의 도금 조건을 확인하였다. 또한 3가 크롬도금의 실 부품 적용 가능성을 검토하기 위해 상용 프로그램인 Solidworks와 Elsyca Platingmaster를 이용, 3D Hull Cell test를 전산 모사하고 실제 Hull Cell 도금과 비교 분석 하였다.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.5
• /
• pp.50-56
• /
• 2001

Fabrication methods are shown to produce slender and cylindrical tungsten shafts by electrochemical etching. The shape of microshatf formed by electrochemical etching is determined by the combination of two conflicting factors, i.e., initial shape and diffusion layer. We can obtain a desirable shaft profile by adjusting the thickness gradient of diffusion layer. The diameter of microshaft is controlled by mathematical model based on relation between process parameters and diameter.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2003.02a
• /
• pp.36-39
• /
• 2003

HTS (High Temperature Superconducting) cable termination current lead has been designed based on simplified boundary conditions such as fixed temperature at both end and sdiabatic/convection in the side wall. However, in the real situation the current lead is enclosed with insulators and exposed to insulation oil and L$N_2$. Therefore it is necessary to consider them for the proper current lead design. In this paper, several important design parameters were chosen and their effect on the temperature distribution and heat loads on the current lead has been investigated. It was found that current lead has to be 2 stage to reach the minimum temperature requirement of insulation oil and insulator is required to reduce the cooling capacity of cryogenic system.

• Electrical & Electronic Materials
• /
• v.5 no.3
• /
• pp.278-283
• /
• 1992

123 초전도체에 마그네틱 모멘트가 큰 Ni불순물을 도핑하여 제작한 $Y_{1}$ Ba(C $u_{2.9}$ $N_{0.1}$) $O_{7-{\delta}}$ 초전도체의 X-ray diffraction pattern, susceptibility, 온도변화등에 따른 전류-전압관계, 임계온도 등에 대하여 연구하였다. 제작된 시료는 매우 뚜렷한 orthorhombic 피크를 가진 123상을 나타내고 있었다. N=0.1의 시료에서는 적은 양의 Ni 불순물과 단면적인 무정형상태의 잘 반응된 YBa(Cu, Ni)$_{3}$ $O_{7-{\delta}}$의 orthorhombic구조를 나타내고 있다. 전반적인 실험 결과로 부터 Ni는 Y-Ba-Cu-O 초전도 시스템에서 초전도에 중요한 역할을 담당하지 않는다는 결론을 얻었다.얻었다.다.

• Proceedings of the KIEE Conference
• /
• 1998.07a
• /
• pp.34-36
• /
• 1998

In these days the hybrid interrupters are widely used for medium voltage class circuit breakers. In the design of the hybrid interrupter, the shape of the short-circuit ring is one of the most important design parameters. Recently the investigation into the phase difference between arc current and magnetic field due to the shape variation of the short circuit ring has been conducted. In this paper, the results of eddy current analyses in the hybrid interrupter and test result are presented.

• Korean Journal of Crystallography
• /
• v.7 no.2
• /
• pp.133-146
• /
• 1996

Morphology and infrared absorbing characteristics of Pt-black prepared by electroplating have been investigated with XRD, SEM, and IR spectrophotometer. The Pt later was coated on Au-coated alumina/glass substrates for 1-5 min at pH 1.0-1.5, where a solution of platinum chloride and lead acetate was used as the electrolyte. At the electrical current density of 20-50 mA/㎠, the Pt-black showed a dendritic growth which was characterized by a "tree" shape. Absorptivity of above 90% at IR radiation of 10 m was observed for the Pt absorbing layer with an area density of ≥1.3mg/㎠.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.8
• /
• pp.834-842
• /
• 2002

The method of moment is applied to the analysis of electromagnetic scattering from an arbitrarily-shaped conductor. The conducting surface is discretized into triangular patches using a GID tool. Surface currents on a conductor are expanded with a vector triangle basis function. By using the Duffy's method, the singular integration appeared in a triangle patch can be transformed into the non-singular integral form suitable for one dimensional Gaussian quadrature integration method. Mutual and self integration extracted singular terms are evaluated by two dimensional Gaussian quadrature techniques.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.7 no.1
• /
• pp.91-100
• /
• 2002

This paper deals with the ripple reduction of the electromagnetic torque developed in IPMSM(Interior Permanent Magnet Synchronous Motor). Generally, torque ripple is an important causes of vibration and noise of motor. For reducing torque ripple in IPM with nonsinusoidal EMF, the optimal current which is able to control maximum torque/ampere is considered to be introduced In the proposed method. The fact of torque ripple being reduced when the optimal current Is used in motor is verified through simulation and experiment.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.902-904
• /
• 2004

PMA(Permanent Magnetic Actuator)는 기존의 유압식, 공압식 또는 스프링 조작기에 비해 신뢰성과 내구성이 뛰어나며, 유지${\cdot}$보수의 비용이 적고, 전류의 ON/OFF로 조작기를 쉽게 제어 할 수 있다. 그래서 최근 중저압 진공 차단기에 많이 사용되고 있다. 그러나 상대적으로 접점 간극이 길고, 압점력이 큰 고압 진공차단기에는 기존의 PMA(Permanent Magnetic Actuator)가 적합하지 않다. 고압 진공 차단기에 PMA를 적용시키기 위해서는 새로운 형상 설계가 불가피한데, 본 논문에서는 새로운 형태의 PMA(Permanent Magnetic Actuator)를 제안하고 그것의 동작 특성 해석을 통하여 사용 가능성을 검증하고자 한다.