• 풍력에너지저널
• /
• 제14권3호
• /
• pp.5-13
• /
• 2023

Floating LiDAR systems (FLSs) are used in many countries because they are easier to install than stationary weather towers, have low maintenance costs, and can be installed in deep sea areas. However, FLSs are rarely used in Korea due to a lack of clear evaluation criteria to verify the reliability and uncertainty of their measurements. This study is the first to verify the reliability of FLSs in Korea with one-year simultaneous observation of six lidar systems - two fixed and four floating systems - in sea areas of Gunsan and Yeonggwang. The reliability of FLSs measurement data was verified by comparison between fixed and floating systems. Moreover, differences between existing wind resource maps and the data observed from the six points were analyzed and wind resource maps were calibrated. The results show a return rate of more than 95 % of the observed data and strong correlations between fixed and floating systems (average R2 of 0.977). Additionally, errors in wind speed predictions to produce a wind resource map could be significantly reduced from 5.7 % to 0.6 % after calibrations with the observation data.

• 풍력에너지저널
• /
• 제14권3호
• /
• pp.25-33
• /
• 2023

In order to secure the safety of increasing offshore activities such as offshore wind farm maintenance and fishing, IMPACT, a mid-term marine weather forecasting system, was established by predicting marine weather up to 7 days in advance. Forecast data from the Korea Hydrographic and Oceanographic Agency (KHOA), which provides the most reliable marine meteorological service in Korea, was used, but wind speed and wave height forecast errors increased as the leading forecast period increased, so improvement of the accuracy of the model results was needed. The Model Output Statistics (MOS) method, a post-correction method using statistical machine learning, was applied to improve the prediction accuracy of wave height, which is an important factor in forecasting the risk of marine activities. Compared with the observed data, the wave height prediction results by the model before correction for 6 to 7 days ahead showed an RMSE of 0.692 m and R of 0.591, and there was a tendency to underestimate high waves. After correction with the MOS technique, RMSE was 0.554 m and R was 0.732, confirming that accuracy was significantly improved.

• 풍력에너지저널
• /
• 제15권1호
• /
• pp.30-42
• /
• 2024

This paper examines the design feasibility of cage aquaculture coexistent with an offshore wind farm in the southwestern sea of South Korea. Among the many types of fish farms, 2 × 3 cage aquaculture was selected for the investigation and the initial design including mooring lines, bridles, etc. was drawn with iterative numerical simulations using Orcaflex. Experimental campaigns were conducted to validate the numerical results, and they were found to be in good agreement with the experiments. Using a validated numerical model, the tension of mooring lines and the deformed volumes of the facility were examined under given operating and survival conditions. The validated model will be further used to investigate various aspects of the cage farm design for design optimization.

• 한국터널지하공간학회 논문집
• /
• 제25권3호
• /
• pp.201-220
• /
• 2023

터널식 전력구는 지중으로 전력을 공급하기 위한 구조물 중 하나이며, 도심지 및 해저구간을 통과하는 구간에 쉴드TBM 공법을 활용하여 안정적으로 건설을 추진한다. 전력구 건설의 경우에는 수직구 심도가 깊어 주로 암반지반을 굴착하며, 암반대상 밀폐형 쉴드TBM 선정에 대한 고찰이 필요하였다. 또한, 지반조사 보고서 결과를 바탕으로 범용적이고, 간단한 설계방법이 필요하였다. 이에 실대형 굴진시험, 누적 굴진데이터, 수치해석을 종합하여 쉴드TBM 설계방법과 관련 프로그램을 개발하였다. 프로그램 결과에 대해 검증을 수행하고자 준공된 전력구 1개 현장의 굴진데이터를 활용하였다. 굴진데이터의 모집단을 추정하기 위해 커널밀도추정 방법을 도입하여 추력, 토크, 동력의 기본사양에 대해 검증을 완료하였다. 본 연구결과를 통해 쉴드TBM 설계업무 전문성 강화 및 안정적 전력공급의 사용자 편익증대를 기대할 수 있다.

• 한국수소및신에너지학회논문집
• /
• 제30권2호
• /
• pp.170-177
• /
• 2019

Continuous solid circulation test at high temperature and high pressure conditions and batch type reduction-oxidation tests were performed to check feasibility of a 0.5 MWth chemical looping combustion system. Pressure drop profiles were maintained stable during continuous solid circulation up to 16 hours. Therefore, we could conclude that the solid circulation between an air reactor and a fuel reactor could be smooth and stable. The measured fuel conversion and $CO_2$ selectivity were high enough even at high capacity and even after cyclic tests. Therefore, we could expect high reactivity of oxygen carrier at real operation condition.

• 전기저널
• /
• 통권233호
• /
• pp.14-17
• /
• 1996

• 전력전자학회지
• /
• 제26권6호
• /
• pp.36-41
• /
• 2021

• 전력전자학회지
• /
• 제24권2호
• /
• pp.26-32
• /
• 2019

• KEPCO Journal on Electric Power and Energy
• /
• 제7권1호
• /
• pp.1-7
• /
• 2021

• KEPCO Journal on Electric Power and Energy
• /
• 제7권1호
• /
• pp.21-24
• /
• 2021