• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.11
• /
• pp.1271-1276
• /
• 2015

The recent trend is that diesel power generation on islands where its prime cost for power generation is high is replaced by new and renewable energy. Therefore, south Jeolla province is progressing the construction project of self-sufficient islands for the areas where power is supplied by depending on diesel generators, which is the project that power is supplied through eco-friendly energy source using sunlight, wind power and energy storage device etc. However, it is difficult to construct new and renewable energy source with the capacity to respond to the load perfectly due to its environmental and geographical conditions regarding capacity design of new and renewable energy. Besides, Microgrid design considering appropriate capacity design of the system components and efficient operation is required through the analysis of climate conditions and load patterns from the design stage for optimal composition of a hybrid system with economic feasibility. Therefore, this study is aimed to conduct a research on optimal combination, capacity calculation and economic feasibility by comprising a hybrid power generation system which will replace 40% of power generation by diesel as new and renewable energy source for Geomun Island where has more than 300 households and requires expansion of the facility among islands located in southwest coast.

• Journal of Technology Innovation
• /
• v.22 no.2
• /
• pp.1-30
• /
• 2014

Offset trade has been applied in Republic of Korea's defense acquisition programs since early 1980s and used for national economic development as well as enhancement of military capabilities. The accumulated offset trade value amounts to over 10 billion dollars by 2010. However, questions in regards to the effectiveness of offset trade have been constantly raised. As it is a quite difficult task to analyze and calculate the application performance of defense technologies acquired by offsets objectively, limited level of quantitative analysis of application performance have been conducted so far. Hence, in this paper, we came to understand the overall status of application of those technologies through in-depth performance analysis and suggested some specific policies for the further development of offset trade based on the analysis results. To begin with, we developed a questionnaire based on performance indicator deducted through literature review of relevant researches, and conducted survey of major offset recipients. Also, another survey of offset experts belonged to the army, government organization, research institute and companies was conducted to evaluate the performance and effectiveness of offsets qualitatively. And we analyzed the efficiency of application performance using DEA. The results of all surveys are showing that there is positive accomplishment in the technological aspect, but in economic aspect, it shows relatively inactive outcome. Based on these results, policy direction is considered to be changed from the emphasis on the acquisition of core technology to revitalization of domestic defense industry in line with new government's policy orientation.

• KEPCO Journal on Electric Power and Energy
• /
• v.2 no.2
• /
• pp.143-165
• /
• 2016

The amount of greenhouse gas emission reduction based on INDCs (Intended Nationally Determined Contributions) submitted to UN by each party is not sufficient to achieve the Paris Agreement's aim to "hold the increase in the global average temperature to well below $2^{\circ}C$ above pre-industrial levels and to pursue efforts to limit the temperature increase to $1.5^{\circ}C$" which was determined in the $21^{st}$ Conference of the Parties to the UNFCCC (COP 21). Accordingly, the emission reduction target of each party will be revised for the $2^{\circ}C$ goal. Among the several options to reduce the carbon emission, CCS (Carbon Capture and Storage) is a key option to curb $CO_2$ emissions from large emission sources such as fossil-based power plants, cement plants, and steel production plants. A large scale CCS demonstration projects utilizing $1^{st}$ generation $CO_2$ capture technologies are under way around the world. It is anticipated, however, that the deployment of those $1^{st}$ generation $CO_2$ capture technologies in great numbers without government support will be difficult due to the high capture cost and considerable increase of cost of electricity. To reduce the carbon capture cost, $2^{nd}$ and $3^{rd}$ generation technologies are under development in a pilot or a bench scale. In this paper, current status of large scale CCS demonstration projects and the $2^{nd}$ and $3^{rd}$ generation capture technologies are summarized. Novel capture technologies on wet scrubbing, dry sorbent, and oxygen combustion are explained in detail for all capture areas: post-combustion capture, pre-combustion capture, and new combustion technologies.

• Proceedings of the Korean Society for Bioinformatics Conference
• /
• 2006.02a
• /
• pp.46-55
• /
• 2006

(주)지노믹트리는 DNA 마이크로어레이 기술을 기반으로 하는 분자진단회사로서, 다음의 세가지 사업에 전력하고 있다. 첫째는 독창적이며 특화된 바이오마커 발굴기술 (MAGIC system)을 바탕으로 각종 암진단을 위한 바이오마커 개발연구 두 번째는 당사의 원천 기술인 다중동시검출 시스템을 이용한 질병 진단 시스템 및 증폭시스템 세 번째는 마이크로어레이 기술을 이용한 유전자 발현 분석, Array CGH, DNA 메틸레이션 분석 그리고 miRNA 검출 등의 지노믹스시대의 연구를 위한 토탈솔루션을 제공하고 있다. 지난 5년간의 마이크로어레이 기반기술을 이용한 자체연구 활동을 수행하면서 축적된 마이크로어레이 관련기술 노-하우들을 국내 마이크로어레이 연구자들에게 공급하기 위하여 노력하고 있다. 특히 당사의 지노믹서비스 부문은 유전자 발현 분석 솔루션 제공을 위해서 자체적으로 제작하여 공급하고 있는 human cDNA(17K/25K) 및 rat cDNA (5.0K) 마이크로어레이, Human (22K) 및 mouse (10K) 올리고뉴클레오타이드 마이크로 어레이 그리고 미생물 연구를 위한 대장균 (6K) 및 폐렴균 (2.2K) 올리고뉴클레오타이드 마이크로어레이 제공 및 이를 이용한 유전자 발현 분석 서비스를 제공하고 있다. 체적으로 제작되는 마이크로어레이 서비스는 2001년 도입한 ISO9001 품질인증시스템의 기반하에서 제작부터 생산까지의 엄격한 품질관리 과정을 거쳐서 고품질의 마이크로어레이를 이용한 분석서비스를 제공 하고 있다. 또한 고객요구형 서비스를 위하여 국외 유수의 마이크로어레이 회사 (Agilent, Microarray Inc, TIGR, Eurogentec 등)의 whole genome 기반의 마이크로어레이 제품을 이용한 분석서비스를 제공하고 있으며 마이크로어레이 실험을 위해서 필수적으로 이용되고 있는 시약 (labeling kit), 마이크로어레이 hybridization을 위한 hardware (hybridization chamber, hnay centrifuge)등을 자체적으로 개발하여 공급하고 있다. DNA copy number 측정을 위한 Array CGH 분석을 위해서는 자체적으로 제작공구하고 있는 human cDNA 마이크로어레이 (17K/25K) 그기고 rat (5.0K) 마이크로어레이를 이용한 분석서비스 및 whole genome 기반의 Agilent 올리고뉴클레오타이드 CGH 어레이 (44K, 35Kb resolution)를 이용한 분석서비스를 제공하고 있다. Epigenetic study를 하는 연구자들을 위한 메틸레이션 마이크로어레이 분석 서비스를 제공하고 있다. 기존분석법인 Bisulfite 처리기반의 분석이 아닌 enzyme digestion후 PCR 증폭방법을 이용한 분석방법을 이용함으로써, bisulfite 처리에 의한 DNA 손실문제를 최소화 하였다. 현재 50개의 문헌을 통해 잘 보고된 메틸레이션 유전자들에 대한 분석서비스를 제공하고 있으며, 지속적으로 표적컨텐츠의 숫자를 증가시킬 예정이다. 최근 많은 연구자들의 관심을 끌고 있는 micro RNA 검출을 위한 DNA 마이크로어레이 서비스를 제공할 예정이다 (2006년 3월 출시). 현재 까지 알려진 약 320개의 모든 miRNA를 탑재하고 있는 소형 DNA 마이크로어레이를 이용한 분석서비스로서 1장의 마이크로어레이 실험을 통하여 알려진 모든 miRNA의 비교분석이 가능하다. 마이크로어레이 실험 뿐만 아니라 data 분석을 위한 software도 상당히 중요한 비중을 차지하고 있다 이를 위하여 (주)지노믹트리는 Agilent에서 개발한 GeneSpring GX (유전자 발현 분석), Signet (마이크로어레이 database) 및 GeneSpring GT (SNP 분석)를 공급하고 있다. 통계적인 기반 지식의 없은 일반 user들을 위한 간편하면서도 종합적인 기능을 포함하고 있는 우수한 프로그램으로 이미 국제적으로 많은 인정을 받고 있다. (주)지노믹트리는 국내외 많은 연구자들의 경제적, 시간적 연구여건을 고려한 마이크로어레이 토탈솔루션을 제공하고 있으며, 실험 분석에서 data 마이닝 그리고 마이크로어레이 실험 디자인에 이르는 토탈솔루션을 제공하고 있다.

• Journal of Environmental Impact Assessment
• /
• v.28 no.6
• /
• pp.556-567
• /
• 2019

As the number of skyscrapers in micro water grid units such as green building and smart building is increasing in the world, the green building certification system is being implemented to solve problems such as increased demand for water resources and energy. However, researches on the use of sustainable water resources like water reuse and water conservation through linkage and continuous use of water resources, while the power and energy sectors are actively conducting R&D projects in the green building certification system on the micro water grid level. Therefore, this paper analyzes the characteristics and limitations of the water resources sector for the continuous utilization of multiple water sources in the green building certification system, due to the inadequate consideration of sustainability. Then investigates whether various water resources such as constants, nature, and alternative water resources are continuously used in and out of the green building or smart building and complex in the micro water grid unit to suggest evaluation methods and performance evaluation standards.

• Economic and Environmental Geology
• /
• v.50 no.3
• /
• pp.251-256
• /
• 2017

This study presents measures to enhance the efficiency of Successive Alkalinity Producing Systems(SAPS), a natural biological purification method that prevents environmental pollution arising from the release of Acid Mine Drainage(AMD) from abandoned mines into rivers and groundwater. The treatment of AMD using SAPS is based on biological processing technology that mostly involves sulfate reducing bacteria(SRB). It has been proven effective in real-world applications, and has been employed in various projects on the purification of AMD. However, seasonal decrease in temperature leads to a deterioration in the efficiency of the process because sulfate-reducing activity is almost non-existent during cold winters and early spring even if SRB is able to survive. Against this backdrop, this study presents measures to enhance the activity of the SRB of the organic layer by integrating light emitting diode(LED)s in SAPS and to maintain the active temperature using LEDs in cold winters. Given that mine drainage facilities are located in areas where power cannot be easily supplied, solar cell modules are proposed as the main power source for LEDs. By conducting further research based on the present study, it will be possible to enhance the efficiency of AMD treatment under extreme cold weather using solar energy and LEDs, which will serve as an environmentally-friendly solution in line with the era of green growth.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.908-908
• /
• 2012

국내 기후 특성상 하절기에 집중되는 강우로 인해 댐의 건설을 홍수조절, 용수확보 및 전력생산 등의 목적에 있어서 불가피하다. 이와 같은 저수지와 하류하천은 댐 수문 개폐에 따라 흐름변화로 인하여 수체의 거동 및 수질 변화가 발생하며, 일반적인 하천과는 다른 특성을 지니게 된다. 또한 수심이 깊은 저수지의 경우에는 흐름방향과 더불어 수심 방향의 특성도 중요하며, 수리 및 수질 모형의 연계를 통한 3차원적인 해석을 필요로 한다. 유역 내 지상 또는 대기에서 발생한 모든 오염물질은 강우에 의해 하천과 호수와 같은 수체로 유입되며, 강우가 발생했을 때 유역의 토지피복 상태와 수리, 지형, 강우강도, 토양의 특성에 의해 하천으로 유입되는 오염물질의 농도와 부하특성이 달라진다. 비점오염물질의 축적이 가능한 호수나 저수지에서는 비점오염원의 유입이 더 큰 문제가 되며, 유량이 극히 미미한 하천의 경우에는 강우초기에 일시에 집중적으로 유입되는 초기 오염 부하량이 문제가 된다. 강우유출수의 하천 유입은 강우 현상과 밀접한 관계를 맺고 있으므로 그 제어가 쉽지 않다. 이러므로 이를 총괄하는 유역통합관리기술이 필요로 하며, 기존의 유역통합관리기술은 댐 상류유역을 중심으로 개발되고 있으며, 댐 상류유역과 저수지, 하류하천으로 구분되어 연구되어 왔다. 또한 각각의 모형이 개별적으로 적용되어 통합적인 평가시스템이 표준화되지 않은 관계로 댐 상하류 모니터링 자료가 연계된 실무 적용이 이루어지지 않고 있다. 따라서 하천 수리 수문학적 역학구조를 이해하고 그 특성에 적합하게 평가할 수 있는 표준화된 시스템이 구축되어야 한다. 또한 효과적인 유역통합관리를 위해서는 하천의 현재 뿐만 아니라 장래에 대한 예측부분도 포함되어야 한다. 본 연구에서는 댐 유역에서의 유출과 수질 변화를 모의하고 이를 이용하여 저수지 내에서의 오염물질 거동에 대해서 해석하였다. 또한 기후변화에 따른 유역, 저수지 및 하천에 미치는 영향을 고려하기 위하여 고해상도 지역기후전망 모의자료를 이용하여 수문학적 스케일로 통계적 상세화한 후 지역별 상세수문시나리오를 생산하여 미래 예측에 활용하였다. 기후변화 시나리오의 상세화를 통한 상세지역의 기후를 예측하고, 예측된 기상자료를 이용하여 유역모델을 모의하여 미래의 유출 및 수질 변화를 파악할 수 있는 기술 개발로 인해 저수지의 운영에 도움을 주고, 주수지의 치수증대 사업 등 유출의 변화에 따른 하류하천 변화를 파악할 수 있고, 기후변화에 따른 하류하천에 대한 홍수기 때 치수, 이수 및 방재에 대하여 기초자료를 제공할 수 있을 것으로 판단된다.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.6
• /
• pp.1073-1090
• /
• 2018

Since the domestic utility tunnels were built mainly in the development project of the new city, they are all in the form of cut-and-cover box tunnel. But, in the case of overseas construction of utility tunnels for existing urban areas, the bored tunnel types are mainly adopted. It is reasonable to install bored tunnels in a downtown area because it is difficult to block the roads or install bypass roads due to heavy traffic and civil complaints. In order to activate the utility tunnels in bored type, it is necessary to secure optimized cross-sectional design technology considering the optimal supplying capacity and mutual influencing factors (Thermal Interference, electrolytic corrosion, efficiency of the maintenance, etc.) of utilities (power cables, telecommunication cables, water pipes, etc.). The optimal cross-section design method for bored utility tunnels is ultimately to derive the optimal arrangement technique for the utilities. In order to develop the design methods, firstly, the cases of tunnel cross-section (Shield TBM, Conventional Tunneling) in overseas shall be investigated to analyze the characteristics of the installation of utilities in the section and installation of auxiliary facilities, It is necessary to sort out and analyze the criteria related to the inner cross-section design (arrangement) presented in the standards and guidelines.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.96-104
• /
• 2018

Military vessels are complex weapon systems consisting of various integrated onboard equipment. Since their acquisition of military equipment takes a long period of time and a prototype ship is deployed and tested, vessel development has relied on its proprietary process. However, due to the growing complexity of onboard equipment technology, application of systems engineering (SE) process has become indispensable. Nonetheless, an effective design process complementing the existing design with the SE has not yet been developed. As such, we have studied an improved basic design process for submarines based on SE. To do so, we analyzed the processes for the basic design, technical review, and requirement management. Included reviews and requirements are SRR, SFR and PDR, and SSRS, SSS, and SSDD. By combining the results in the SE framework, we built an improved basic design process that can be applied in parallel with the SE-based technical review and requirement management. To assess the process, we applied our proposed model to the submarine development undergoing the basic design phase. It is possible to effectively manage the requirements, design artifacts and improve traceability, and also utilize them as test and evaluation materials. The SE-based basic design process is expected to be useful in other kinds of vessel design.

• Korea Science and Art Forum
• /
• v.16
• /
• pp.157-169
• /
• 2014

Lake Biwa Canal was a dream project that reminds us the passion and innovation of Kyoto Citizens more than water supply. It is a modernization project combining engineering knowledge and scientific technology, which started transportation by ship through big-scale civil construction as well as supplying electricity as the first waterpower plant in Japan, and it overcame the physiographic limit through adopting unique method of waterway transportation. Lake Biwa Canal, which has tangible and intangible culture heritage value as the traditional space of Kyoto, the Old Capital of 1200 years, conceives a cultural meaning that is connected through various mutual relation as well as scientific technologic factor. Lake Biwa Canal is not only the function for supplying water to gardens and temples of Kyoto region, but it is also a cultural fruit that is formed by complex causal relationship of various contents such as geographical and environmental background, the phases of the times, local development policy, political circumstances and religions. This study is aimed at interpreting the value of Lake Biwa Canal multilaterally by the convergence of cultural and technological aspects through the view of the world which the age tried to pursue, focusing on the construction of Lake Biwa Canal which was accomplished in the process of promoting the modernization of Kyoto.