• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.5
• /
• pp.1706-1716
• /
• 1991

본 연구에서는 혼합대류하는 연직원통휜 열전달에 미치는 복사효과에 Rossel- and 근사해법을 도입한 층류 경계층방정식과 휜 전도방정식을 동시에 해석하여 복사 -전도매개변수(radiation-conduction parameter) M, 대류-전도 매개변수(convectionc- onduction parameter) N$_{c}$, 부력매개변수(buoyancy force parameter) R$_{i}$ 그 리고 횡곡률 매개변수(transverse curvature parameter) .lambda.를 계산 파라미터로 하여 휜 최적설계의 기본이 되는 총열전단률, 무차원 국소등가열전달계수, 무차원 국소열플 럭스 및 휜온도분포를 계산할 수 있는 일반성있는 algorithm을 개발하고 휜 성능에 관 한 결과들을 제공함으로써, 좀 더 완전한 복사 열플럭스를 도입한, 다음 연구를 위한 범용의 기초자료를 얻는데 본 연구의 목적이 있다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.1
• /
• pp.341-348
• /
• 1991

An efficient tool to deal with a multi-dimensional radiative heat transfer is in strong demand to analyze various thermal problems combined either with other modes of heat transfer or with combustion phenomena. The current study examined the discrete ordinates method (DOM) for a coupled radiative and conductive heat transfer in rectangular enclosures in which either nonscattering or scattering medium is present. The results were compared with the other benchmarked approximate solution. The efficiency and accuracy of the DOM were thus validated.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.5 no.1
• /
• pp.83-95
• /
• 2002

Thermal conductivity of ceramic fibrous insulator was analysed and predicted by using the modeling/simulation technique. Ceramic fibrous insulators are widely used as high temperature insulator on account of their lightweight mass and heat resisting properties. Especially it is suitable to protect the high speed aircraft and missiles from severe aero-thermodynamic heating. Thermal conductivity of ceramic fibrous insulator could be determined from the conductive heat transfer and the radiative heat transfer through the insulator. In order to estimate conductive thermal conductivity, homogenization technique was applied, while radiative thermal conductivity was computed by means of random number and radiation probability. Particularly radiation probability can make it possible to estimate the conductivity of fibrous insulator without any experimental constant. The calculated conductivity predicted in the present study have a reasonable accuracy with an average error of 7 percent to experimental data.

• Journal of the korean Society of Automotive Engineers
• /
• v.13 no.4
• /
• pp.11-17
• /
• 1991

내연기관의 열전달은 구조물에 따라 흡기계통, 연소실, 배기계통으로 나누어지고, 열전달기구에 따라 전도, 대류, 복사로 나누어지며, 여기서는 그중 가장 핵심이 되는 연소실 내에서의 대류 및 복사 열전달 현상에 관하여 논하고자 한다. 연소실 열전달의 정량적 해석을 위해서는 흡기계통과 피스톤 운동에 의한 3차원 압축성 난류 유동장과 점화, 착화 및 연소 진행과정, 이들의 복합적 상호 작용에 대한 이해가 선행되어야 한다. 여기서는 현재까지 제시된 연소실 열전달의 정량적 모델과 문제점,앞으로의 연구 진행방향에 대해 소개하고자 한다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.12
• /
• pp.1207-1215
• /
• 2008

Satellite generates a complex electromagnetic noise by conducted and radiated coupling effect of the various electrical instruments. This noise may cause serious problems on the satellite system. To minimize the electromagnetic coupling effects and maintain the system safety margin, system noise reduction technique should be applied from the beginning of the system design. The COMS system is evaluated by measuring the conducted noise on system electrical power leads at PSR(Power Supply Regulator) and verifying a 6 dB system safety margin under the complex noise environment with current injection. The radiated noise due to the complex transmit antenna configuration is evaluated by integrating all unit-level RE measurement results, and the RF compatibility between spacecraft and launch vehicle is analyzed with the above estimations. This paper describes the COMS EMC compatibility analysis with respect to each unit level EMC test results, and RF compatibility analysis between spacecraft and launch vehicle. The analyzed results will be reflected on FM(Flight Model) EMC test.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.1
• /
• pp.40-49
• /
• 2004

최근에 새로운 전파이용기술이 상용화됨에 따라, 주파수 혼신 및 상호간섭에 의한 무선설비의 보호 및 전파이용 통신서비스의 질적 수준의 유지를 위하여 무선장비들에서 나오는 출력 전력을 제한하고 있다. 현재, 국내에서는 출력전력을 공중선전력(전도성전력)으로만 측정을 하는데, 이것은 실제로 복사되는 출력전력이 아니므로 좀더 정확한 출력전력의 측정방법을 알아보기 위해 국내.외의 복사성 전력의 기술기준 및 측정방법을 비교 분석하였다. 분석 결과 미국과 유럽은 실제로 복사되는 출력전력을 안테나에서 나오는 출력전력뿐만 아니라 안테나의 이득까지 고려한 복사성 전력인 EIRP(등가등방성복사 전력 : Equivalent Isotropic Radiated Power)와 ERP(유효복사전력: Effective Radiated Power)를 사용하여 측정하고 있었다. 또한 복사성 전력 측정시 주파수대 별로 1GHz이하인 경우에는 기준 안테나를 반파장 다이폴 안테나를 사용하여 ERP로 측정을 하며, 1GHz 이상인 경우에는 기준 안테나를 혼 안테나를 사용하고 ERP로 측정을 하고 있었다. 따라서,우리나라도 보다 정확한 출력 전력의 측정 및 규제를 위하여 실제로 복사되어지는 EIRP와 ERP를 고려 할 필요가 있다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.12
• /
• pp.1796-1804
• /
• 1998

A numerical investigation has been performed to discuss the radiation-affected steady-laminar natural convection induced by a hot inner cylinder under a large temperature difference in the annuli filled with a gray gas. To examine the effects of thermal radiation on thermo-fluid dynamic behaviors in the eccentric geometry, the generalized body-fitted coordinate system is introduced while the finite volume method (FVM) is used for solving the radiative transport equation. After validating the numerical results for the case without radiation, the detailed radiation effect has been discussed. Based on the results of this study, when there exists a large temperature difference between two cylinders, the existence of radiatively participating medium is found to incur a distinct difference in fluid dynamic as well as thermal behavior.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1255-1256
• /
• 2007

전도, 대류, 복사 방식의 열전달 방식중에서 복사방식이 가장 효율적이고 쾌적한 난방이라는 것은 기존의 연구에서도 잘 알려진 사실이다. 본 연구에서 제안한 천장형 원적외선 복사난방 방식은 같은 면적에서 같은 전력을 투입하였을 때, 설정온도 도달시간이 기존의 전기 난방기 보다 약 $10{\sim}20$분 빠르게 도달함을 알 수 있으며, 그만큼 에너지절약이 된다는 것을 알 수 있었다.

• Aerospace Engineering and Technology
• /
• v.6 no.1
• /
• pp.173-181
• /
• 2007

Radiated emission / susceptibility performance of the KSLV-I 2nd stage which are controlled from the unit level to the system level should be examined and managed all over the frequency ranges in order to ensure the normal operation of the SC, the 1st stage of the KSLV-I, ground support equipments which are installed at the space center, and other wireless communication networks. Not only unintentional electric field emissions from the KSLV-I system and its subsystems should be restricted to the levels less than the limits specified in the EMC requirements, but also proper test and evaluation method should be established, respectively. In this paper, radiated emission/susceptibility test limits, method, and test results of the KSLV-I 2nd stage engineering model are presented.

• KOMUNHWA
• /
• no.58
• /
• pp.119-136
• /
• 2001

This study aims to analyze the sources of restoring of Geungnakjeon(極樂殿) and creation of the buddhist mural paintings(後佛壁畵) of Muwisa(無爲寺) in Gangjin(康津). Muwisa Geungnakjeon was constructed in 1430(in the twelfth year of King Sejong's(世宗)reign). At that