• Korean Journal of Optics and Photonics
• /
• v.23 no.4
• /
• pp.154-158
• /
• 2012

In this paper, for low cost infrared optical equipment, we design and fabricate an infrared optical system for an uncooled detector using PGM(Precision Glass Molding) lenses. The designed infrared optical system has a good athermalization, and the material of all of its lenses is a chalcogenide glass suitable for the PGM method. In addition, we also fabricate the same infrared optical system using SPDT(Single Point Diamond Turning) lenses in order to measure the optical performance of PGM lenses. We measure the MTF(Modulation Transfer Function) of the two infrared optical systems which use the PGM lenses and the SPDT lenses. And then we compare and analyze the images of them both. As a result, we find that they have only a very small difference in optical performance. If the use of PGM lenses increases, we expect to reduce the cost of infrared optical equipment.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.1
• /
• pp.217-222
• /
• 2018

The deterioration of the Battery is decided by SoC and SoH. To determine Battery deterioration, SoC measurement method of Battery by Transfer Function was studied. The SoC of the Battery changes most greatly in the 1Hz band where the DC resistance is detected. but it is a narrow band to observe, therefore, the observation band was moved to 1kHz using the tone busrst signal. Welch's method was used to observe the frequency domain characteristics of the signal. As a result of the spectral estimation, it was confirmed that the response signal of the battery is 1dB difference when the SoC is 40%, 60%, and 80%, respectively. Through this, Proposed the new method of Battery SoC measurement.

• Journal of Advanced Navigation Technology
• /
• v.15 no.2
• /
• pp.326-333
• /
• 2011

In the present study, we measured the performance (accuracy and reaction time) of the user in the virtual environment with see-through Head-Mounted Display system that includes 3D sound generated through Head-Related Transfer Function (HRTF) to investigate the feasibility of auditory display for a certain object's spatial information. To sum up the results of two experiments, when presenting location information of the object with 3D sound, it is desirable that information arrangement from the user should be an orthogonal pattern which is located with right angle, not a diagonal pattern. Like these results propose that spatial information presentation with 3D sound make the optimal object arrangement of virtual environment possible.

• Journal of the Korean Society of Radiology
• /
• v.14 no.4
• /
• pp.353-360
• /
• 2020

This research aims at suggesting exposure condition that shows maintaining the value of the physical image quality factor by decreasing tube voltage and tube current from the standard exposure condition(80 kV, 7 mA) of a CBCT apparatus. To measure the value of the physical image quality factor, modular transfer function(MTF) was analyzed and dose-area product(DAP) was used for the measurement of exposure dose. CBCT images of a Sedentex IQ phantom were obtained under 15 exposure conditions of different combination of tube voltage(80, 78, 76 kV) and tube current(7, 6, 5, 4, 3 mA) and MTF 10 was calculated under each exposure conditions. There were no significant differences in MTF 10 under 80 kV-6 mA, 80 kV-5 mA exposure conditions in comparison with standard exposure condition. Based on the results of this research, 80 kV-5 mA condition are expected to be able to reduce exposure dose with maintaining the value of the physical image quality factor of the standard exposure condition.

• Korean Journal of Optics and Photonics
• /
• v.16 no.1
• /
• pp.50-55
• /
• 2005

A method for measuring the wavefront error and the modulation transfer function(MTF) of large aperture optics using an unequal path interferometer is presented. A bidirectional shearing interferometer is used for collimation testing of the measurement system. A large aperture Fizeau interferometer with long optical path difference measures the wavefront error of the optics under test by using a $\Phi$ 400 mm off-axis parabolic mirror. The MTF is also measured at the wavelength of the interferometer by changing the laser light into partially incoherent light. Test results of a $\Phi$ 300 mm Cassegrain type satellite telescope made in Korea are presented.

• Journal of Soil and Groundwater Environment
• /
• v.9 no.3
• /
• pp.27-32
• /
• 2004

The oceanic tides have an effect on groundwater levels in coastal fractured rock aquifers. The observed groundwater table fluctuations caused by the effective stress through an aquifer are shown as sine curves similar with tidal fluctuation. To estimate a hydrogeologic parameter, tidal method is utilized with groundwater level fluctuations of two monitoring wells. Cross correlation function is used to calculate time lags between observed groundwater levels and tide, and the deeper well shows longer time lag. The storage coefficients calculated by using tidal efficiency and time lag show large differences. The storage coefficients obtained by using time lags are close to the result of slug test, and that of the deeper well shows closer value by slug test. The tidal efficiency is unsatisfied to apply in the tidal method because of an effect of phreatic aquifer and the vertical flow of groundwater through fractured confining bed. This tidal method can be an economical and effective way to define the parameter by considering the location of observation well and hydrogeologic characteristics of a coastal aquifer.

• Journal of the Korean Wood Science and Technology
• /
• v.31 no.1
• /
• pp.52-60
• /
• 2003

The physical properties of small hardwood and softwood specimens treated with liquid ammonia were investigated. The specimens treated for 4 or 18 hours were compared with the controls. The EMCs of the liquid ammonia treated specimens were higher than those of the controls when conditioned at the same humidities. However once oven-dried they didn't show any significant differences in EMCs. With the increase of liquid ammonia treatment time specimens shrank in radial and tangential directions, but not in longitudinal direction. As liquid ammonia treatment time increased the ultrasonic velocities of specimens decreased and their densities increased, thus their dynamic MOEs decreased. For chestnut specimens the presteamed were more plasticized than the liquid ammonia treated. Incising on the surfaces of specimens didn't improve liquid ammonia permeability in both hardwoods and softwoods. Liquid ammonia treatment was very effective for plasticizing 5 mm thick softwoods. Relative dielectric constants and thermal conductivities were measured with both liquid ammonia treated and control specimens.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.304-304
• /
• 2020

항만구조물의 방파제 또는 방파호안의 마루높이는 배후지역의 활용도에 따라 내습파의 월파로 인한 전달파 또는 월파량에 의해 결정되기 때문에 월파량산정은 항만구조물을 설계함에 있어서 주요한 설계인자이다. 그동안 국내에서는 항만구조물 설계시 주로 외국의 기준이나 기법을 활용하고 있는 실정이다. 국내 항만설계기준에서는 Goda도표를 이용하여 직립제 및 방파호안에 대한 월파량 산정방법을 제시하고 있으나, 도표축이 log로 되어 있어 내삽 또는 외삽시 사용자에 따라 월파량 차이가 발생할 수 있다. 국내의 해역특성 및 최근 설계동향을 반영한 월파량 산정식의 개발이 필요하고, 동일조건에 대한 동일한 월파량 산정결과가 도출될 수 있어야 한다. 최근의 대표 연구성과인 EurOtop(2007)과 같이 지수함수의 형태로 월파량 산정식을 제시하고자 한다. 경사식구조물의 평균월파량 산정식 도출을 위해 적용한 구조물 위치에서의 수심(d_t)은 0.40m, 0.55m, 0.70m 이다. 적용수심을 서로 다르게 한 것은 기존의 대부분의 연구에서 적용하지 않았던 구조물 위치에서의 쇄파조건을 고려하기 위한 것이다. 실험파는 Bretschneider-Mitsuyasu 주파수 스펙트럼을 사용한 불규칙파를 적용하였다. 본 연구에서는 주 피복재로 TTP를 대상으로 하였고, 주기 및 파고를 다양한 조건에서 수리실험을 수행하였다. 본 연구의 실험결과는 월파량 계측을 통해 분석된 평균 월파량을 적절한 산정식으로 나타내기 위해 EurOtop(2007)의 기존 월파량 산정식 형태에 대입하여 비교하여 분석하였다. 따라서, 본 논문은 월파량 산정식 제시를 통해 보다 합리적인 항만구조물의 마루높이 산정이 가능하게 하고, 또한 월파량 산정과 관련된 실험자료 구축을 통해 신뢰성해석 자료 및 수치모형의 검증 자료로 활용될 수 있을 것으로 판단된다.

• Journal of the Korean GEO-environmental Society
• /
• v.19 no.11
• /
• pp.31-37
• /
• 2018

Most of tall building systems are composed of above-ground structure and underground structure used for parking and stores. The underground structure may have a pronounced influence on tall building response, but its influence is still not well understood. In a widely referred report on seismic design of tall buildings, it is recommended to model the underground structure ignoring the surrounding ground and to impose input ground motion calculated considering the underground structure-soil kinematic interaction between at its base. In this study, dynamic analyses are performed on 1B and 5B basements. The motions at the base are calculated to free field responses. The motions are further compared to two procedures outlined in the report to account for the kinematic interaction. It is shown that one of the procedure fits well for the 1B model, whereas both procedures provide poor fit with 5B model analysis result.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.2
• /
• pp.821-828
• /
• 2011

This paper developed the algorithm for improving the performance the auto pilot in the autonomous vehicle system consisting of the Track keeping control, the Automatic steering, and the Automatic mooring control. The automatic steering is the control device that could save the voyage distance and cost of fuel by reducing the unnecessary burden of driving due to the continuous artificial navigation, and avoiding the route deviation. During the step of the ship autonomic navigation control, since the wind power or the tidal force could make the ship deviate from the fixed course, the automatic steering calculates the difference between actual sailing line and the set course to keep the ship sailing in the vicinity of intended course. first, we could get the transfer function for the modeling of ship according to the Nomoto model. Considering the maneuverability, we propose it as linear model with only 4 degree of freedoms to present the heading angle response to the input of rudder angle. In this paper, the model of ship is derived from the simplified Nomoto model. Since the proposed model considers the maximum angle and rudder rate of the ship auto pilot and also designs the Fuzzy controller based on existing PID controller, the performance of the steering machine is well improved.