• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2010.05a
• /
• pp.576-577
• /
• 2010

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.10a
• /
• pp.766-767
• /
• 2012

• Journal of the Korean Electrochemical Society
• /
• v.11 no.4
• /
• pp.273-283
• /
• 2008

GDL(Gas Diffusion Layer) is one of the main components of PEM fuel cell. It transports reactants from the channel to the catalyst and removes reaction products from the catalyst to the channels in the flow filed plate. It is known that higher permeability of GDL can make it possible to enhance the gas transport through GDL, leading to better performance. And MEA's temperature is determined by gas and heat transport. In this paper, three dimensional numerical simulation of PEM fuel cell of parallel channel and serpentine channel by the permeability of GDL is presented to analysis heat and mass transfer characteristics using a FLUENT modified to include the electrochemical behavior. Results show that in the case of parallel channel, performance variation with change of permeability of GDL was not so much. This is thought because mass transfer is carried out by diffusion mechanism in parallel channel. Also, in the case of serpentine channel, higher GDL permeability resulted in better performance of PEM fuel cell because of convection flow though GDL. And mass transfer process is changed from convection to diffusion when the permeability becomes low.

• Korean Chemical Engineering Research
• /
• v.57 no.6
• /
• pp.898-906
• /
• 2019

In this study, basic research was conducted to provide guidelines for selecting fluorescent dye and using proper concentration of fluorescent dye to use evaluation of cell viability and fluorescent dye delivery efficiency. Propidium iodide and Yo-Pro-1 were used as fluorescent dyes. In the evaluation of cell viability and the efficiency of delivery using Propidium Iodide and Yo-Pro-1, the histogram of each fluorescent dye was different depending on the type of fluorescent dye and the concentration used. These results were related to the characteristics of the fluorescent dyes used. This was related to the properties of the fluorescent dyes used. From these results, it was found that the analytical results depending on the characteristics of the fluorescent dyes used in the cell analysis. The effect of the fluorescent dye on the cell was confirmed, but it was confirmed that it did not affect the analysis result. In addition, the influence of interference between fluorescent signals was confirmed when two or more kinds of fluorescent dyes were used for analysis. The higher the concentration of Yo-Pro-1 was, the larger the effect of interference was, and the concentration of Propidium Iodide did not affect the interference of fluorescence signal. This study confirmed that the evaluation of the cell viability and the evaluation of the delivery efficiency were influenced by the type and concentration of the fluorescent dyes and it was related to the characteristics of the fluorescent dyes. Based on the results, appropriate concentrations of fluorescent dyes suitable for evaluation of cell viability and delivery efficiency were suggested.

• Journal of the Korean earth science society
• /
• v.37 no.7
• /
• pp.408-419
• /
• 2016

To investigate the in-situ sound velocity of sediment in the southwestern part of the East Sea, the laboratory sound velocity was measured using the pulse transmission technique. The sediment sound velocity measured in laboratory was corrected to in-situ sound velocity based on the seafloor temperature, seawater sound velocity, Kim et al. (2004) model, and Hamilton (1980) model. The distribution of the corrected in-situ sound velocity applying Kim et al. (2004) and Hamilton (1980) models reflects the characteristics of sediments of the study area and shows a similar distribution pattern. The correction for in-situ sound velocity was mostly influenced by seafloor temperature. Then, correction of sound velocity using seafloor sediment temperature data should be accomplished for conversion of laboratory data to in-situ sound velocity.

• Journal of the Korea Society for Simulation
• /
• v.17 no.4
• /
• pp.153-158
• /
• 2008

The technology of Software Defined Radio (SDR) is a possible solution to interwork flexibly between various wireless transport protocols. Ubiquitous network, like u-health service network, includes sensor devices or nodes which do not facilitate all the same transport protocols to access network. As such this may be in such unreachable situations as poverty of all required AP (Access Point)’s, faults or contention in a path of particular protocol communication, etc. This paper presents research results of modeling and simulation to analyze transport performance of multi-protocol ubiquitous network which includes SDR-based interwork nodes and congestion-controlled AP’s. Focusing mainly on dynamics of overall transport performance rather than protocol execution procedures, this paper employs the Zeigler’s DEVS (Discrete Event Systems Specification) methodology and DEVSim++simulation environment to experiment.

• Journal of the Korean Society for information Management
• /
• v.4 no.1
• /
• pp.124-153
• /
• 1987

This study examines that in what types and to what extent. scholarly information is communicated through formal and informal communication channels among Korean physicists and also analyzes the behavioral traits of researchers participating in communication process. Based on the results from the data analysis, several suggestions are given in the viewpoint of the libraries and information librarians.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.12
• /
• pp.1974-1981
• /
• 2004

This paper is concerned with the numerical investigation of the transfer characteristics of the landing impact force exerted on court sport shoes to the sport surface condition. The reaction force occurred by the impact between court sport shoes and sport surface is absorbed by shoes to some extent, but the remaining impact force is to transfer the human body from the sole of a foot. We consider four surface conditions, asphalt, urethane, clay and wood court surfaces. For the dynamic response analysis, we construct a coupled leg-shoes FEM model and create the multi-layered composite surface model. The numerical simulations are performed by an explicit nonlinear finite element method. Through the numerical experiments, we examine the transfer characteristics of the landing impact force to the surface condition.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.13 no.3
• /
• pp.17-24
• /
• 1999

This paper presents a method of ANC for transfonrer noise control utilizing a sproker and microphone pair. In this study, the main focus is on identifying the dynamic characteristics of speaker - amplifier microphone path. This study presents a theoretical method to identify the dynamic characteristics of speaker-microphone pairs. The transfer functions of microphone - speaker pair have been estimated utilizing sequential least square(SLS) algorithm. We identified the estimated transfer function has stable JXlles and zeros in z-plane. This paper also propose an architecture far the noise cancellation to which we applied the estimated transfer function.nction.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.731-736
• /
• 2004

In this study, a linearized model of pneumatic cylinder position control system including transmission line is proposed. The transmission line using compressible fluid has a nonlinear transfer characteristics because that the frequency response of it is changed by the flowing state of the fluid. But, when the pressure difference between both sides of transmission line is low, the effect of resonance characteristics of it under high frequency range can be neglected because of the friction force and low pass characteristics of the position control system. Therefore, the transmission line can be modeled by second order transfer function and the natural frequency, damping ratio and gain are changed by the diameter and length of it. The effectiveness of the proposed model is proved by comparison of simulation results using proposed model with experimental results and simulation results using conventional model.