• Journal of Periodontal and Implant Science
• /
• v.36 no.1
• /
• pp.113-123
• /
• 2006

연구배경 IgG에 대한 $Fc{\gamma}$ 수용기는 치주병인균에 대한 숙주 반응에 있어서 중요한 역할을 하는데, 이 중 $Fc{\gamma}RIIIa$는 NK 세포, 대식세포, 단핵구, ${\gamma}{\delta}T$세포에서 발현되며, EC2 도메인에서 158 아미노산 부위의 valine (V)-phenylalanine (F)의 유전자다형성을 보인다. $Fc{\gamma}RIIIb$는 특이적으로 중성구에 발현되는데, extracellular (ECl) Ig-like 도메인 내 4개의 아미노산 치환(substitutions)에 의한 NA1-NA2 유전자다형성을 보인다. 이 연구의 목적은 한국인에서 급진성 치주염 환자와 $Fc{\gamma}III$ 수용기의 유전자다형성과의 관련성을 알아보는 것이다. 연구방법 및 재료 치주적으로 건강한 90명 (대조군, 남자 64명, 여자 26명)과 서울대학교 치과병원 지주과에 내원하여 급진성 치주염으로 진단된 환자 43명 (aggressive periodontitis patients: AgP, 남자 30명, 여자 13명)을 대상으로 하였다. 모든 실험 대상자는 임상 실험에 대해 동의 하였고, 초진 시 전자 탐침(Florida Probe(R) Co. Gainesville, FL)을 이용하여 탐침 시 치주낭 깊이 (PPD), 임상부착수준 (CAL), 치태지수(PI), 탐침 후 출혈지수 (BOP)를 측정하였다. 또한 이들의 정맥혈에서 추출한 DNA를 PCR법, 전기영동법 등을 이용하여 $Fc{\gamma}RIIIa$, $Fc{\gamma}RIIIb$의 대립 유전자의 존재여부를 확인하였다. 이를 바탕으로 $Fc{\gamma}RIII$ 복합 유전형을 확인하여 각 군 간을 비교하였다. 연구 결과 1. $Fc{\gamma}RIIIa$에 대한 유전자다형성 연구 결과 대조군과 급진성 치주염 환자 군(AgP)사이에서는 대립 유전자 분포가 서로 유의성 있는 차이를 나타내었고 (P<0.05), $Fc{\gamma}RIIIb$에서는 유의성 있는 차이를 발견할 수 없었다. (P>0.05) 2. $Fc{\gamma}RIIIa$ 158F 대립형질이 급진성 치주염 환자에서 유의성 있게 많이 발견되어졌다. (P<0.05) 결론 이 연구를 통하여 $Fc{\gamma}RIIIa$ 유전자의 분석이 한국인의 급진성 치주염에 대한 감수성의 위험요소의 표지자로 활용할 수 있을 것으로 사료되며, 향 후 더 많은 환자를 대상으로 히는 추가 연구가 필요하다고 생각된다.

• Sleep Medicine and Psychophysiology
• /
• v.17 no.2
• /
• pp.91-99
• /
• 2010

Objectives: Deficit schizophrenia (DS) constitutes a disease separate from non-deficit schizophrenia (NDS). The aim of the current study was to compare the quantitative EEG and low resolution electromagnetic tomography (LORETA) imaging between DS and NDS. Methods: This study was performed by 32 channels EEG for 42 schizophrenia patients who we categorized into DS and NDS using proxy instrument deficit syndrome (PDS). We performed the absolute power spectral analyses for delta, theta, alpha, low beta and high beta activities. We compared power spectrum between two groups using Independent t-test. Partial correlation test was performed with clinical parameters. Standardized LORETA (sLORETA) was used for comparison of cortical activity, and statistical nonparametric mapping (SnPM) was applied for the statistical analysis. Results: DS showed significantly increased delta and theta absolute power in fontal and parietal region compared with NDS (p<0.05). Power spectrum showed significant correlation with 'anergia' and 'hostility/suspiciousness' subscale of brief psychiatric rating scale (BPRS)(p<0.05). sLORETA found out the source region (anterior cingulate cortex/limbic part) that delta activity was significantly increased in DS (p=0.042). Conclusions: DS showed different cortical activity compared with NDS. Our results may suggest QEEG and LORETA could be the marker in differentiating between DS and NDS.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.3 no.2
• /
• pp.125-130
• /
• 1993

We has made 2-zone vertical electric furnace and has been grown CdS single crystal by sublimation method in crystal growth tube with tail tube without seed crystal for growth. While it has been growing, temperature difference ${\Delta}T$ of source and growth part has nearly agreed with theoritical value $14.7^{\circ}C$and experimental value $15^{\circ}C$ Then, crystal of best quality has been grown, when temperature of tail tube has been $110^{\circ}C$, in spite of quickly pulling up crystal growth tube a degree O.38mm per hour. The grown crystal have had hexagonal structure and single crystal with c-axis to length of crystal growth tube from X- ray diffraction pattern of powder method and Laue pattern of back reflection Laue method. Also, the mobility and carrier density from Hall effect measurement have been $316cm^2/V{\cdot}sec$ and $2.90{\times}10^{16}cm^{-3}$ at the room temperature, respectively.

• Resources Recycling
• /
• v.11 no.6
• /
• pp.3-11
• /
• 2002

Recently, waste printed circuit board (PCB) has significantly increased in its amount due to the rapid development of electronic industries. Since several kinds of noxious materials and also valuable metals are contained in it, the waste PCB is in an urgent need of recycling for the dual purposes for the prevention of environmental pollution and recovery of valuable resources. Also, the catalyst which equipped in the exhaust pipes of automobiles to reduce emission of air pollutants contains precious met-als so that their recovery from the waste auto-catalysts is required. In this study, the recovery of valuable metals from waste PCB and auto-catalyst by arc furnace melting process has been investigated, which is known to be very stable and suitable f3r less production of pollutants due to its high operating temperature. The effect of the kind of flux on the recovery of precious metals was examined by using quicklime, converter slag, and copper slag as the flux. In addition, the influence of direct and alternating current and the applying direction of direct current has been investigated. It was observed that using converter or copper slag as a flux was more desirable for a higher efficiency in the precious metal recovery compared with quicklime. For the effect of current, application of direct current taking the bottom as a negative pole generally showed a better efficiency for the extraction of valuable metals from waste PCB, which was also observed for the case of waste auto-catalyst. The average recovery of precious metals from both wastes by arc furnace melting process was very high, which was up to in the range of 95～97%.

• Journal of the Korean Chemical Society
• /
• v.39 no.6
• /
• pp.446-452
• /
• 1995

Lithium intercalates, $Li_xFeMoO_4Cl$ ($1{\leq}X{\leq}2$) prepared by electrochemical lithiation of $FeMoO_4Cl$ crystallizes in monoclinic structure for all x values as revealed by x-ray diffraction and galvanostatic discharge experiments. According to the x-ray photoelectron spectroscopic study, Fe(III) is at first reduced to Fe(II) upon lithium intercalation with the x domain of $0{\leq}X{\leq}1$, where the crystal symmetry is changed from tetragonal to monoclinic. On the other hand, Mo(VI) is reduced to lower valent state upon further lithium intercalation ($1{\leq}X{\leq}2$), where no crystal symmetry transformation and reduction of Fe(II) to lower valent state are observed. The Mo 3d spectrum for $Li_2FeMoO_4Cl$ appears as a complex shape, but can be deconvoluted into the three sets of the doublet on the basis of Gaussian function, those which correspond to Mo(VI), Mo(V) and Mo(IV) states, respectively. The mixed valent states of molybdenum after further lithiation may be due to a competitive reaction between the formation of Mo(V) and its disproportionation to Mo(IV) and Mo(VI).

• Elastomers and Composites
• /
• v.48 no.1
• /
• pp.67-75
• /
• 2013

E-TPE (Engineering Thermoplastic Polyether Ester) was Ester Elastomer with functional groups as recycling and fast processability. In addition, if the car's lightweight enough to highlight eco-friendly materials that help to improve fuel economy has become. Have all the attributes of the rubber and engineering plastics E-TPE the available temperature area is spacious, heat resistance and oil resistance is excellent but getting attention as a new material in the field of auto parts in the field of electrical and electronic domestic depends entirely on imports by the lack of core technology and has been research and development is urgently needed. In this study, the hard segments, polyester (TPEE) as the base soft elastomers of the segments Ethylen-prophylene-Copolymer and CSM (Choloro sulphonated polyethylene Rubber), VAMAC (Ethylene Acrylic Rubber), NBR (Acrylonitrin Butadiene Rubber), 1, 3-Phenylene-bisoxazoline is dealing with Dynamic Vulcanized by content and added rubber properties, thermal variation observed. As a result, the properties of the dynamic vulcanization with NBR compared to other rubber heat resistance and oil resistance is on the increase.

• Journal of Service Research and Studies
• /
• v.10 no.2
• /
• pp.31-42
• /
• 2020

This study is a study on the performance of design services among export voucher projects. In particular, we have identified the actual state of use of design services from the perspective of participating companies and the corresponding problems. The purpose of the study is to provide basic data for the preparation of successful support plans in the field of design services. This study designed a quantitative survey to measure accurate performance of design services using archive records, and the survey was sent three times in total to 135 participating companies. A significant achievement of design services the study found is that the role of design were important in the export of the nation's main industries such as medical/biological/healthcare and electrical/electronic products. In addition, we could see that all participating companies were using design services regardless of the difference in sales. In particular, 96% of participating companies answered that the design service effect was the most effective service. As a result, it proved the importance of design services in export voucher projects, and suggested the importance of introducing a management system as a direction for the development of design services in future export voucher projects. He majored in advertising design at Hongik University's Graduate School of Industrial Art and at the Korea Institute of Design Promotion. It carries out the government's design policy such as design research, design education, and corporate design support. He is currently working as an Invited Designer by Korea Design Exhibition.

• The Korean Journal of Zoology
• /
• v.31 no.3
• /
• pp.165-176
• /
• 1988

Stmcturai changes at the surfaces of oocytes of Pseudopotamilla occelata were examined by electron microscopy. The oocytes, which grow up to the flnai stage in the same coelomic fluid, once released from the ovary at 5 $\mu$ m stage, change in the structure of the vitelilne envelopes. Microvilli were found to change gready in structure, abundance and behaviour dudng oogenesis. Microvilli are short and bifurcated at the previtellogenic stages and grow in size, but the number increases only during previtellogenesis but decreases during vitellogenesis. Glycocaiyx structures begin to form at the tips of microvitli at the early previtellogenic stages and become more abundant as oocytes grow and remain at the final stage of oogenesis. The tips of microvilli are separated from the stems at the late vitellogenic stages to form vesicles simultaneously with retraction of the microvilli. Vitelline envelope consists of outer, intermediate and inner layers at the previtellogenic stages. However, the inner layer becomes thickened and differendated into two sublayers at 80 $\mu$m stage, - while the outer and intermediate layers remain constant in the thickness. These structural changes were presumably the results of functional differentiation of the vitelline envelope throughout oogenesis even in the same milleu.

• Clean Technology
• /
• v.24 no.1
• /
• pp.9-14
• /
• 2018

In this study, Material life cycle evaluation was performed to analyze the environmental impact characteristics of TiN-Zr membrane manufacturing process. The software of MLCA was Gabi. Through this, environmental impact assessment was performed for each process. Transition metal nitrides have been researched extensively because of their properties. Among these, TiN has the most attention. TiN is a ceramic materials which possess the good combination of physical and chemical properties, such as high melting point, high hardness, and relatively low specific gravity, high wear resistance and high corrosion resistance. With these properties, TiN plays an important role in functional materials for application in separation hydrogen from fossil fuel. Precursor TiN was synthesized by sol-gel method and zirconium was coated by ball mill method. The metallurgical, physical and thermodynamic characteristics of the membranes were analyzed by using Scanning Electron Microscope (SEM), Energy Dispersive X-ray (EDS), X-ray Diffraction (XRD), Thermo Gravimetry/Differential Thermal Analysis (TG/DTA), Brunauer, Emmett, Teller (BET) and Gas Chromatograph System (GP). As a result of characterization and normalization, environmental impacts were 94% in MAETP (Marine Aquatic Ecotoxicity), 2% FAETP (Freshwater Aquatic Ecotoxicity), 2% HTP (Human Toxicity Potential). TiN fabrication process appears to have a direct or indirect impact on the human body. It is believed that the greatest impact that HTP can have on human is the carcinogenic properties. This shows that electricity use has a great influence on ecosystem impact. TiN-Zr was analyzed in Eco-Indicator '99 (EI99) and CML 2001 methodology.

• Journal of the Korean Chemical Society
• /
• v.31 no.6
• /
• pp.509-519
• /
• 1987

The tetradentate Schiff base ligand, 3,4-bis(salicylidene diimine) toluene, have been prepared by the reaction of salicylaldehyde with 3,4-diaminotoluene by Duff method. The Schiff base ligand reacts with Ni(II), Co(II), and Cu(II) ions to form new complexes, [Ni(o-BSDT)${\cdot}(H_2O)_2$], [Co(o-BSDT)${\cdot}(H_2O)$], and [Cu(o-BSDT)]. It seems that Ni(II) and Ni(II) complexes are hexacoordinated with the Schiff base ligand and two molecules of water, while the Cu(II) complexes are tetracoordinated with the Schiff base. The mole ratio of tetradentate Schiff base ligand to metals was found to be 1 : 1. The redox chemistry of these complexes was investigated by polarography and cyclic voltammetry with glassy carbon electrode in DMSO with 0.1M TEAP${\cdot}$[Ni(o-BSDT)${\cdot}(H_2O)_2$] hav EC reaction mechanisms which undergo a irreversible electron transfer followed by a fast chemical reaction. [Co(o-BSDT)${\cdot}(H_2O)_2$] undergoes a reduction of Co(II) to Co(I) and a oxidation of Co(II) to Co(III), and [Cu(o-BSDT)] undergoes a reduction of Cu(II) to Cu(I).