• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.8
• /
• pp.1241-1246
• /
• 2013

Currently, The general transportation system arranges the armature on the full length of transportation lines. However, when this method is applied to the long distance transportation system, it causes an increase of material cost and manufacturing time. Thus, in order to resolve this problem, discontinuous arrangement method of the armature has been proposed. However, in the method of using stationary discontinuous armatures, mover can stop in the freewheeling section which is non-installations section when disturbance is generated and the mover can not be moved because armature control is impossible. Thus, the distance determination of armature is very important. Also, when the armature is arranged discontinuously the edge always exists due to the structure. Due to this edge, the cogging force is greatly generated during the entry and ejection of the mover to the armature. This cogging force causes thrust force ripple generating noise, vibration and decline of performance, it must be reduced. Therefore, in this paper, we examined the end edge cogging force generated by the stationary discontinuous armatures through 2-D numerical analysis using finite element method (FEM) and we figured out distance of armature for end edge cogging force minimization.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.2
• /
• pp.243-248
• /
• 2014

The permanent magnet linear synchronous motors facilitate maintenance, for it is structurally simple compare to rotating machine and has lots of advantage such as a precision control, high speed, high thrust and so on. However, it causes an increase of material cost because of structural characteristics that need to arranges the armature on the full length of transportation lines. Thus, in order to resolve this problem, we propose the discontinuous arrangement method of the armature but the edge always exists due to the structure when the armature is arranged discontinuously. Due to this edge, the cogging force is greatly generated and it causes thrust force ripple generating noise, vibration and decline of performance. Therefore, in this paper, we examined the characteristic of end edge according to the skew angle through 3-D numerical analysis using finite element method(FEM) and improved the operation characteristics.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.5 no.6
• /
• pp.613-619
• /
• 2010

The stationary discontinuous armatures that are used in permanent magnet linear synchronous motors (PM-LSMs) have been proposed as a driving source for transportation systems. However, the stationary discontinuous armature PM-LSM contains the outlet edges which always exist as a result of the discontinuous arrangement of the armature. For this reason, the outlet edge cogging force generated between the armature's core and the mover's permanent magnet. This paper contemplated the outlet cogging for ceaccording to 2-D numerical analysis by FEM. We installed the auxiliary pole for in order to minimize the outlet cogging force.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.11
• /
• pp.1675-1680
• /
• 2013

Recently, the permanent magnet linear synchronous motor as low noise, high speed and high thrust force transportation system has been proposed but this motor causes an increase of material cost because of its characteristic arranging the armature on the full length of transportation lines when this system is applied to the long distance transportation system. Therefore, we suggested discontinuous arrangement method of the armature to solve this problem. However, Detent force which causes thrust force ripple generating noise, vibration and decline of performance is generated when a mover pass between the armatures. Thus, in this paper, we examined characteristic of detent force to reduce the end edge effect according to the end edge teeth's height and auxiliary teeth and suggested the shape that can the most reduce the detent force.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.5
• /
• pp.1067-1072
• /
• 2012

Recently, linear motors have been widely researched and have been increasingly used in various industrial applications. Especially, permanent magnet linear synchronous motors(PMLSMs) have been getting the spotlight in the transportation system. A PMLSM is structurally simple and has a lot of merits such as high speed, high thrust force, etc. However, in case of a long stator system which arranges armature to the full length of transportation lines, a PMLSM has some disadvantages such as the material cost increase and long manufacturing time. Hence, in order to overcome these problems, the PMLSM with stationary discontinuous armature structure and concentrated windings was proposed. However, this method occurs undesirable cogging force by outlet edge effect. The cogging force causes thrust force ripples and generates noise and vibration. Therefore, in this paper, we proposed installation method of auxiliary pole PMLSM with concentrated winding applying bifurcating in order to reduce cogging force by the outlet edge when the armature is placed in a discontinuous arrangement. Also, we have examined characteristics of outlet edge cogging force using 2-D finite element analysis(FEA).

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.837-838
• /
• 2015

본 논문에서는 양측식 영구자석 선형 동기 전동기(Permanent Magnet Linear Synchronous Motor: 이하 PMLSM)의 전기자 분산배치를 위해 전기자에 보조치 및 Offset에 의해 나타나는 단부 코깅력을 해석하였다. 또한 가장 낮은 단부 코깅력을 가지는 Offset 위치에 대하여 역기전력을 분석하였으며 이에 따른 추력 특성에 대한 고찰을 수행하였다.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.979-980
• /
• 2011

영구자석 선형 동기 전동기(Permanent Magnet Linear Synchronous Motor)는 구조적으로 간단하며 고속화 고추력화 등의 많은 장점을 가지고 있지만 전기자 권선부의 슬롯-치 구조로 인한 코깅력과 단부효과에 의한 코깅력이 발생한다. 이는 추력 맥동의 원인이 되며, 소음과 진동을 발생시킨다. 따라서, 본 연구에서는 전기자를 분산배치할 경우 필연적으로 생기는 단부에 의한 코깅력을 저감하기 위해 기존의 전기자 끝단에 설치한 보조치를 응용하여 계단형 형상을 가진 보조치의 설치를 제안하였다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2013.11a
• /
• pp.203-204
• /
• 2013

분산되어 있는 컴퓨팅 자원을 가상화시킨 이후 접근하여 사용하는 클라우드 컴퓨팅은 인터넷의 발전과 대규모의 데이터센터를 지니는 IT 기업의 등장으로 그 모습을 드러내게 되었다. 복잡도가 높은 다중 클라우드 환경에서 클라우드 브로커(CSB)는 클라우드 사용자(CSC)와 클라우드 제공자(CSP)를 중개하여 최적의 가상 머신(VM) 배치를 할 수 있도록 한다. CSB의 과제는 가장 좋은 성능을 보이며 동시에 가장 경제적인 VM들을 다른 CSP들로부터 제공받아 CSC가 사용할 수 있도록 하는 것이다. 본 논문에서는 초기 VM 배치를 위해 CSC에서 요구하는 자원의 양을 예측하는 기법들을 소개하고, 관련된 미래 기술의 발전 방향에 대해 논의하고자 한다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.6
• /
• pp.889-895
• /
• 2011

PMLSM is structurally simple and it have a lot of merits such high speed, high thrust force etc., but cogging force by slot-teeth structure of armature and cogging force by outlet edge effect occurs. This is the cause of thrust force ripple and generate the noise and vibration. Therefore, in this paper we proposed installation of an auxiliary pole to mover of the PMLSM in order to decrease cogging force by the outlet edge which came necessarily into being discontinuous arrangement of the armature. Also, outlet edge cogging force designed a form of the auxiliary pole which the minimum became, and we compared a outlet edge cogging force characteristic along a winding method of an armature as we used 2-D of finite element analysis.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.11
• /
• pp.1611-1616
• /
• 2012

Recently, the stationary discontinuous armature Permanent Magnet Linear Synchronous Motor(PM-LSM) was suggested as a driving source for long-distance transportation system. However, as these motors arrange armatures discontinuously, there occurs an edge which causes the cogging force. This works as a factor that bothers acceleration and deceleration that takes place when movers enter into and eject from the armatures. Therefore, installation of auxiliary teeth on the edge of armature of PM-LSM is suggested in order to reduce cogging force caused by the edge when the armature is placed in a discontinuous arrangement. But length of auxiliary teeth can be changed if install it with auxiliary pole in order to decrease more and more edge cogging force. On this, in the study, decided on a design variable of auxiliary teeth and used 2-D FEA, and examined edge cogging force characteristic along this in order to grasp length of auxiliary teeth changed according to installation positions of an auxiliary pole.