In Korea, grouting has been mostly designed and constructed by experiences without expert knowledge and theoretical study. So there are a lot of problems related to the quality and safty of grouting. Therefor, in this paper the quality management skills and method were discussed through out by using the auto-grouting method and field test of grouting for the construction. Through the limit water injection test of the soil, it make the optimum injection pressure and injection speed of grouting, and through the lugeon test of the rock, it make assess the permeability of before and after grouting. In order to prevent the hydraulic fracture of soil and break away from the grouts if it apply four kinds of mode of grouting stop criteria, injection effects can be improved. From the above characteristcs designers evalute the fitness values of injection pressure(p), injection speed(q) and grouting penetration time(t). So far, to record and manage pressure(p) and speed(q) of grouting autographic devices such as intergation flow-meter usually record data in a roll of paper. Intergration flow-meter can record grouting flow quantity exactly, but the recorded pressures differ from the any basis such as intitial, intermediate and final point. Therefore, it has been argued that is a need of reliable method to describe the connection between the pressure recorded by an intergration flow-meter and the special properties of the grouting target ground. auto-grouting method can describe the reliable connection between the grouting pressure and the special properties of the grouting target ground. So, in this paper by using auto-grouting method, it is expected that to secure basis of quality control techniques construction.
Journal of the Korea Academia-Industrial cooperation Society
/
v.19
no.1
/
pp.146-157
/
2018
Over the last 10 years, the number of disasters has been increasing in Korea. As a result, the need for temporary residences or shelters for disaster conditions is increasing. In this study, post-disaster refugees housing was developed using lightweight composite panels that are lighter than the materials that make up the existing shelter. To accomplish this, the structural performance of the lightweight composite panel was validated. Among the performance tests on the panels, the transverse load test was conducted according to the ASTM E 72 criteria. As a result of the experiment, when each specimen was subjected to a uniformly distributed load, the allowable load was determined according to the span. All the experiments were ended due to a loss of adhesive at the junction of the skin and core. Further analysis was conducted to calculate the shear stress when the junction was dropped. The mean shear stress at the adhesive surface of a specimen, 150 mm and 200 mm in thickness, was 0.0170MPa and 0.0156MPa, respectively. This suggests that similar values were obtained from panels of equal thickness. In addition, this stress provides a criterion of judgment that could be used to inspect the structural performance of the panels. The performance of the panel was evaluated based on the allowable load, but it may be possible to increase the strength of the lightweight composite panel by improving the joining method to avoid separation from the junction.
The renowned Terzaghi's one-dimensional consolidation theory is not applicable to quantification of time-rate settlement for highly deformable soft clays such as dredged soil deposits. To deal with this special condition, a non-linear finite strain consolidation theory should be adopted to predict the settlement of dredged soil deposits including self-weight and surcharge-induced consolidation. It is of importance to determine the zero effective stress void ratio ($e_{00}$), which is the void ratio at effective stress equal to zero, and the relationships of void ratio-effective stress and of void ratio-hydraulic conductivity for characterizing non-linear finite strain consolidation behavior for deformable dredged soil deposits. The zero effective stress void ratio means a transitional status from sedimentation to self-weight consolidation of dredged soils. In this paper, laboratory procedures and equipments are introduced to measure such key parameters in the non-linear finite strain consolidation analysis. In addition, the non-linear finite strain consolidation parameters of the Incheon clay and kaolinite are evaluated with the aid of the proposed methods in this paper, which will be used as input parameters for the non-linear finite strain consolidation analyses being performed in the companion paper.
Recently, the utilization of recycled aggregates for backfilling a power transmission pipeline trench has been considered due to the issues of eco-friendly construction and a lack of natural aggregate resource. It is important to identify the physical and thermal properties of domestic recycled aggregates that can be used as a backfill material. This paper evaluated thermal properties of concrete-based recycled aggregates with various particle size distributions. The thermal properties of the recycled aggregates and river sand provided by local vendors were measured using the transient hot wire method and the transient needle probe method after performing the standard compaction test. The needle probe method considerably overestimated the thermal resistivity of recycled aggregates especially at the dry of optimum water content because of experiencing disturbance while the needle probe is being inserted into the specimen. Similar to silica sand, the thermal resistivity of recycled aggregates decreased when the water content increased at a given dry density. Also, this paper evaluated some of the existing prediction models for the thermal resistivity of recycled aggregates with the experimental data, and developed a new prediction model for recycled aggregates. This study shows that recycled aggregates can be a promising backfill material substituting for natural aggregates when backfilling the power transmission pipeline trench.
이용자(利用者) 중심(中心)의 대화방식(對話方式) 시스팀을 개발(開發)하고 시험(試驗)하였다. 2년(年)동안 280개의 프로파일로 CA - Condensates 데이터 베이스내에서 정보(情報)를 검색(檢索)해 보았다. 그 시스팀의 작업능률(作業能率)을 사용(使用)한 데이터 베이스와 하드웨어의 구조(構造), 소프트웨어 패키지, 이용자(利用者)의 수(數), 그리고 정보(情報)센터에서 제공(提供)한 보조(補助)에 따라 평가(評價)하였다. 대화식(對話式) 검색방법(檢索方法)이나 이용자(利用者)의 요구(要求)를 양화(量化)하는 것, 그리고 여러가지 분야별(分野別)로 검색(檢索)하는 방법(方法) 등 이용자(利用者)의 요구(要求)를 보다 충실(充實)하게 만족(滿足)시킬 수 있는 여러가지 방법(方法)들을 논의(論議)하였다. 모든 정보(情報)시스팀의 목적(目的)은 적시(適時)에 올바른 정(情)보를 적자(適者)에게 제공(提供)하는 것이라고 잘 알려져 있다. 다시 말해서, 정보(情報)시스팀의 주요목적(主要目的)은 이용자(利用者)의 요구(要求)를 충족(充足)시켜 주는 것이다. 이러한 관념(觀念)의 변화(變化)는 정보처리(情報處理)에 큰 변화(變化)를 가져와 정보(情報)시스팀의 적응성(適應性)을 증가(增加)시키기 위해 여러 가지 새로운 방법(方法)들이 개발(開發)되었다. 정보(情報)시스팀들 사이의 상호작용(相互作用), 사람과 컴퓨터와의 대화(對話), 그리고 컴퓨터의 조력(助力)으로 이용자(利用者)의 프로파일을 작성(作成)하는 것 등은 이용자(利用者)의 요구(要求)를 존중(尊重)하고, 필요(必要)한 정보(情報)를 쉽게 찾기 위해서 고안(考案)된 것이다. 한편, 우리들은 이용자(利用者)의 특성(特性)이나 배경(背景), 그리고 문헌(文獻)에 대한 그의 습성(習性) 등에 대해서 얼마나 모르고 있는가를 깨닫게 된다. 상기(上記)의 내용(內容)을 요약(要略)하면, 근대정보(近代情報) 시스팀은 다음의 필요조건(必要條件)을 만족(滿足)해야 한다. 1) 이용자(利用者)의 요구(要求)에 호응(呼應)하기 위해서 적합(適合)한 일련(一連)의 정보(情報)를 제공(提供)해야 한다. 2) 이용자(利用者)와의 관계(關系)에서 시스팀은 적극적(積極的)이어야 한다. 즉, 프로파일 검색공식(檢索公式)에서 유발(誘發)되는 잘못을 지시(指示)하고 지적(指適)할 수 있어 야 한다. 나아가서 컴퓨터의 조력(助力)으로 프로파일을 작성(作成)하고 쉽게 수정(修正)할 수 있는 바람직하다. 우리들은 상기(上記)한 필수조건(必須條件)에 일치(一致)하도록 노력(努力) 하고 Bratislava에 위치(位置)하고 있는 슬로박 과학원(科學院)의 무기화학연구소(無機化學硏究所)와 화학공업경제연구소(化學工業經濟硏究所)가 공동(共同)으로 개발(開發)한 시스팀이 상기(上記)의 특수성(特殊性) 최소(最少)한 몇가지 도입(導入)하였다. 시스팀은 CACS라는 작업명하(作業名下)에서 운영(運營)되었다. 대략 15개월동안 280여개의 프로파일로 CA- Condensates 데이터베이스에서 정보(情報)를 검색(檢索)하여 이용자(利用者)들에게 최신정보(最新情報) 주지사업(周知事業)을 해 보았다. 우리들은 시스팀의 작업능률(作業能率)을 평가(評價)하고 이용자(利用者)의 요구(要求)를 만족(滿足)시키는 최선(最善)의 방법(方法)을 모색(摸索)하였다. 우선 이용자(利用者)와 시스팀사이를 밀접(密接)하게 연결(連結)하는데 중점(重點)을 두었다. 작업능률(作業能率Z)을 분석(分折)해 보고 우리들은 효율(效率)에 영향(影響)을 주는 인자(因子)는 다음의 4가지 주요분류(主要分類)에 속한다는 결론(結論)을 얻었다. (1) 검색(檢索)하는 데이터 베이스 (2) 情報시스팀, 소프트웨어 패키지 그리고 하드웨어 구조(構造) (3) 이용자(利用者)의 특성(特性)과 그의 요구(要求) (4) 정보(情報)센터가 이용자(利用者)에게 제공(提供)하는 보조(補助)
Developing rice lines with various amylose contents is necessary to diverse usages of rice in terms of raw materials for processed food production, and thereby to promote rice consumption in Korea. A rice mutant line, 'Namil(SA)-dull1' was established through sodium azide mutagenesis on 'Namil', a non-glutinous Korean Japonica rice cultivar. Namil(SA)-dull1' had dull endosperm characteristics and the evaluated amylose content was 12.2%. A total of 94 F2 progenies from a cross between 'Namil(SA)-dull1' and 'Milyang23', a non-glutinous Tongil-type rice cultivar, was used for genetic studies on the endosperm amylose content. Association analyses, between marker genotypes of 53 SSR anchor markers and evaluated amylose contents of each 94 F2:3 seeds, initially localized rice chromosome 6 as the harboring place for the modified allele(s) directing low amylose content of 'Namil(SA)-dull1'. By increasing SSR marker density on the putative chromosomal region followed by association analyses, the target region was narrowed down 0.94 Mbp segment, expanding from 28.95 Mbp to 29.89 Mbp, on rice chromosome 6 pseudomolecule. Among the SSR loci, RM7555 explained 84.2% of total variation of amylose contents in the $F_2$ population. Further physical mapping on the target region directing low amylose content of 'Namil(SA)-dull1' would increase the breeding efficiency in developing promising rice cultivars with various endosperm characteristics.
To evaluate exposure characteristics of the insecticide imidacloprid to apple orchard workers during treatment on orchard fields and evaluate its potential risk using a whole body dosimetry (WBD) method, 1,000-time diluted acephate+imidacloprid 25(20+5)% solutions were sprayed on 10 apple orchard fields in Cheongju with a speed sprayer at a rate of 3,000 L/ha/person, after put on clothes such as inner/outer clothes, personal air pump with a IOM sampler, nitrile glove and mask. Exposure test included mixing, loading and application steps. The test pesticide imidacloprid residues in the collected samples were analyzed with a HPLC-DAD. Recoveries ranged from 81.5 to 108.6% for analytical method validation and from 73.8 to 86.7% for field recovery. Total exposed amounts to mixer/loader and applicator were found to be 0.0014-0.0279% of total applied active ingredient of imidacloprid. Glove exposure of both mixer/loader and applicator was higher than the other parts. Margins of safety of mixer/loader and applicator were calculated to be 97-355 and 46-196, respectively, indicating that exposure risk of imidacloprid to apple orchard workers by spraying with a speed sprayer was very low.
Park, Jin-Cheon;Kim, Yang-Kil;Yoon, Young-Mi;Choi, Su-Yeon;Park, Jong-Ho;Park, Hyoung-Ho;Ra, Kyungyoon;Park, Tae-Il
KOREAN JOURNAL OF CROP SCIENCE
/
v.67
no.3
/
pp.180-188
/
2022
This study was conducted to determine the optimal sowing date for seed yield of summer oat (Avena sativa L.) cultivars "Darkhorse (DH)" and "Highspeed (HS)" in Wanju, Jeonbuk province between 2017 and 2018. We investigated seed yield from 4 sowing dates: July 15, July 30, August 15, and August 30. We evaluated the agronomic characteristics of summer oats (DH and HS). We found the heading date of all cultivars to be within 50 days. Delayed sowing resulted in significantly increased plant height for both years and cultivars. There was no significant difference in spike length of DH and HS which ranged from 12.8 to 17.8 cm. The sowing date of July 30 produced a higher number of grains per spike, but this yield differed significantly by year and cultivars. In 2017, the first sowing resulted in the lowest DH yield at 132 kg per 10a, while the second sowing had the highest yield at 227 kg. HS yield was the lowest in the first sowing at 126 kg and the highest in the third sowing at 219 kg. In 2018, DH had the lowest yield from the first sowing at 184 kg per 10a, and the highest from the second sowing at 240 kg, but there was no significant difference between these yields. The first sowing for HS gave the lowest yield at 160 kg, and the second sowing produced the highest at 258 kg. The germination rate of harvested seeds from each sowing date in 2017 and 2018 was found to be higher than 85% and there was no significant difference between the two cultivars in the 2018 germination rate test. Thus, we found the optimal sowing date for summer cultivation of oats for the highest seed yield to be between July 30 (second sowing) and August 15 (third sowing).
Proceedings of the Korean Geotechical Society Conference
/
1998.05a
/
pp.35-81
/
1998
Distinct Element Method(DEM) has a great advantage to model the discontinuous behaviour of jointed rock masses such as rotation, sliding, and separation of rock blocks. Geometrical data of joints by a field monitoring is not enough to model the jointed rock mass though the results of DE analysis for the jointed rock mass is most sensitive to the distributional properties of joints. Also, it is important to use a properly joint law in evaluating the stability of a jointed rock mass because the joint is considered as the contact between blocks in DEM. In this study, a stochastic modelling technique is developed and the dilatant rock joint is numerically modelled in order to consider th geometrical and mechanical properties of joints in DE analysis. The stochastic modelling technique provides a assemblage of rock blocks by reproducing the joint distribution from insufficient joint data. Numerical Modelling of joint dilatancy in a edge-edge contact of DEM enable to consider not only mechanical properties but also various boundary conditions of joint. Preprocess Procedure for a stochastic DE model is composed of a statistical process of raw data of joints, a joint generation, and a block boundary generation. This stochastic DE model is used to analyze the effect of deviations of geometrical joint parameters on .the behaviour of jointed rock masses. This modelling method may be one tool for the consistency of DE analysis because it keeps the objectivity of the numerical model. In the joint constitutive law with a dilatancy, the normal and shear behaviour of a joint are fully coupled due to dilatation. It is easy to quantify the input Parameters used in the joint law from laboratory tests. The boundary effect on the behaviour of a joint is verified from shear tests under CNL and CNS using the numerical model of a single joint. The numerical model developed is applied to jointed rock masses to evaluate the effect of joint dilation on tunnel stability.
Trial and demonslative reforestations were planted by Korea German Management Project at Ulju district in 1976. The follow results that were investigated at spring time in 1977 showed the different situation of winter damage according to site condition and species. 1. Picea abies was completely dried out in this district and its reason was to be thought as a winter damage by cold-dry wind. 2. Cryptomeria japonica was seriously damaged in comparing with Chamaecyparis obtusa and very seriously damaged on the wind-exposured site. So these species are also unsuitable species like Picea abies in this district. 3. The resistance ranking to winter dry wind damage were Picea, Cryptomeria, Chamaecyparis, ${\times}$ Pinus rigitaeda. Pinus rigida, Larix leptolepis and Alnus hirsuta. The falling leave species like larch in this district during winter were thought in necessary to select as the planting species for almost very little winter damage. 4. ${\times}$ Pinus rigitaeda to be showed as a suitable species in this district were also seriously damaged on exposured site and, Pinus rigida and Larix were also attacked with small damage. The potassium-phosphorus fertilizer dressing plots had a trend to reduce this winter damage until some level. 5. The winter climate can be devided into 10 zone in order to evaluate the right or wrong of suitable on the exotic species. The Yongnam region in eastern side of Sobaik mountain are far drier than the Honam region in western side of Sobaik mountain during winter time. Picea abies, Cryptomeria and Chamaecyparis originated in the high humidity winter climate are to be thought to be more suitable in the Honam region than the Yongnam region. Specially the suitable site of Picea abies should be only found in the region with high humidity and much precipitation except the Yongnam region.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.