새로 개발한 철재 교량용 방호울타리는 기존 시설에 비해 충격흡수기능과 조망권 확보, 융설작업, 유지보수가 용이하도록 설계되었다. 본 연구는 새로 개발한 철재 교량용 방호울타리를 건설교통부의 $\ulcorner$도로안전시설 설치 및 관리지침 - 교량용 방호울타리 편. 1999$\lrcorner$ 의 설계기준에 따라 기존 고속도로에 사용하고 있는 F형 콘크리트 교량용 방호울타리와 성능비교를 통해 평가하고자 하였다. 비교평가는 S2급 교량용 방호울타리의 시험기준으로 실시하였으며 결과는 다음과 같이 나타났다. 첫째, 소형승용차를 대상으로 한 운전자의 안전도 평가에서는 두가지 시설 모두 강도성능, 충돌 후 차량 안전성능 구성 부재 비산 억제 성능 등 세 가지 기준을 만족하였으나, 가속도 기준에 있어서는 철재 교량용 방호울타리는 기준인 20g 이하인 18.2605g로 나타나 안전기준을 만족하였고, F형 콘크리트 교량용 방호울타리는 20.1791g로 나타나 기준을 약간 상회하는 것으로 나타났으나 안전기준의 범위에 있는 것으로 평가하였다. 둘째. 대형차량을 대상으로 한 방호울타리의 구조적 안정성 평가에 있어서는 F형과 철재 교량용 방호울타리 모두 평가기준에 적합한 것으로 나타났다. 새로 개발한 철재 교량용 방호울타리는 국내 최초로 모의충돌시험과 실물차량 충돌시험을 통해 개발하였다는 의의를 가지고 있으며 성능측면에서도 기존의 시설에 비해 충분히 안전하다는 것을 증명하였다. 그러나 측정시설의 미비로 충돌후의 차량의 이탈속도나 이탈각도에 대하여 만족할 만한 수준의 결과를 제시하지는 못하였다.
Kim, Byung-Hun;Baek, Jong-Eun;Lee, Hyun-Jong;Park, Hee-Mun
International Journal of Highway Engineering
/
v.14
no.1
/
pp.17-24
/
2012
This study evaluated the performance of Korean epoxy asphalt mixtures using several laboratory tests. Four types of epoxy asphalt mixtures were manufactured based on 13mm dense graded asphalt mixtures: three Korean and one Japanese epoxy asphalt mixtures where 20% or 40% of asphalt binder was replaced by epoxy resins. Curing time was determined as 3 and 6 hours for the mixtures containing 40% and 20% of epoxy resins, respectively. From the laboratory tests including wheel tracking, indirect tension fatigue, bending beam, and moisture susceptibility tests, it was concluded that the epoxy asphalt mixtures had superior performance than conventional asphalt mixtures except moisture susceptibility. Also, the performance of the Korean epoxy asphalt mixtures was comparable to the Japanese mixtures. Thermal coefficient, bond strength, and indirect tension tests were conducted to examine the applicability of the Korean epoxy asphalt mixtures to concrete repair. Its adhesion was strong enough to be bonded to surrounding concrete materials and its tensile strength was comparable to the concrete, but thermal expansion coefficient was 5 times greater than the surrounding concrete.
Proceedings of the Korea Institute of Fire Science and Engineering Conference
/
2008.04a
/
pp.117-119
/
2008
It is very important to protect life, property at sea from any fire. Recommendation on improved fire test procedures for surface flammability of bulkhead, ceiling and deck finish materials specifies a procedure for measuring fire characterizing their flammability and thus their suitability for use in marine construction. In this paper, we investigated the positive expected by fire test procedures for flammability of bulkhead, ceiling and deck finish materials. Also, unusual materials were analyzed. Finally, we suggest methods to solve several problems related to unusual materials.
Viable potential of Mycobacterium smegmatis, a slow grower in vitro cultivation and of M. leprae, an obligate intracellular parasitic bacterium, which can not be cultured yet in vitro was assessed by fluorospectrophotometry. Bacterial cells in different numbers and under various physiological status were incubater with fluorescein diacetate(FDA). After an incubation of the bacterial preparations with FDA at specified conditions, amount of fluorescein inside bacteria was measured by a fluorospectrophotometer at 470nm and 510nm of excitation and emission wavelengths, respectively. Fluorounit given by such bacteria showed a correlation with assessment of viability of the same preparations made by other methods, such as optical density and colony forming units of M. smegmatis and intracellular ATP content of M. leprae. The possible use of fluorospectrophotometry in assessing viability or physiological potential of bacteria, particularly intracellular parasites and fastidious organisms to culture in vitro is discussed in relation to other methods.
Journal of the Korean Society for Nondestructive Testing
/
v.20
no.5
/
pp.431-437
/
2000
Standard Test Block(STB) for UT(Ultrasonic Testing) is a block approved by authoritative for material, shape and quality. STB is used for characteristic tests, sensitivity calibration and control of the time base range of UT inspection devices. The material, size and chemical components of STB should be strictly controled to meet the related standards such as ASTM and JIS because it has an effect upon sensitivity, resolution and reproductivity of UT. The STBs which are not approved are sometimes used because the qualified STBs are very expensive. So, the purpose of this study is to survey the characteristics, quality and usability of Non-Standardized Test Blocks. Non-Standardized Test Blocks did not meet the standard requirements in size or chemical components, and ultrasonic characteristics. Therefore if the Non-Standardized Test Blocks are used without being tested, it's likely to cause errors in detecting the location and measuring the size of the defects.
For testing antimicrobial activity of functional plastics containing antimicrobial agent. We have used Escherichia. coli (ATCC 25922) and Staphylococcus. aureus (ATCC 6538P) with plastics which contained a Ag-hydroxyl apatite agent. In this paper, effect of antimicrobial test on plastics containing silver complex agent which accomplished by using test condition that Trypticase Soy Broth (TSB solution have diluted 500 times with 0.1 M phosphate buffer), pH7.2, Temp. $37\pm1^{circ}C$ and 120 rpm for 24 hr. the condition give the opportunity to better perform the antimicrobial active effect of individual functional plastics. As result. the test conditions were best effect of antimicrobial by using plastic contained minimum 0.5% with Ag-hydroxyl apatite agent.
Journal of the Korea Academia-Industrial cooperation Society
/
v.21
no.12
/
pp.97-106
/
2020
The purpose of this study is to determine how to apply ISO/IEC/IEEE 29119 software test procedures and ISO/IEC 25023 software test evaluation items to software-accredited testing laboratories based on the ISO/IEC 17025 international standard requirements. As a method, the overall requirements for their application to a test laboratory were analyzed by mapping ISO/IEC/IEEE 29119 and ISO/IEC 25023 based on ISO/IEC 17025. According to the mapping analysis, a total of 29 documents were created, including quality manuals, procedures, and test guidelines for the operation of the test laboratory. As a result of the study, a test laboratory management system was developed using Confluence 6.15 software by applying the analyzed results of the overall requirements. The test procedures, documents, and records were stored in, and operated from, this system. Verification of suitability for operation of the test laboratory was conducted by KOLAS evaluators through a document review and an on-site audit at the LG Electronics SW Accredited Test Laboratory in Seoul. In conclusion, it was confirmed through the KOLAS evaluation that the test laboratory management system and the operation of the test laboratory are appropriate and, compared with previous cases, the test laboratory operates effectively, and the overall schedule of accreditation could be shortened.
Journal of the Korean Recycled Construction Resources Institute
/
v.1
no.3
/
pp.246-254
/
2013
This study is purposed to verify the safety of the floor of the children's playground using polyolefin foam waste and rubber paving. The critical fall height, walking suitability, long term physical fatigue expectation and slipperiness were tested. Polyolefin foam wastes in thickness of 30mm, 50mm and 70mm were prepared with paving the rubber paving materials in 12mm and 15mm thickness respectively. The test on the critical fall height was carried out according to KS G 5758:2009. The floor hardness test equipment (O-Y HMA) was used for the test on hardness of the floor from a viewpoint of walking suitability and fatigue. A portable slipperiness tester (ONO PPSM) was used for slipperiness test. It was revealed from the test that the floor made of the polyolefin foam waste and rubber paving were considerably safe from a viewpoint of impact absorption. With regards to the hardness of the floor, it was shown the excellent performance in the aspects of walking and fatigue for male. But it was not suitable with walking on the shoes(middle heels) for female. And they will be very fatigue if they were in a long time walking or standing. As far as the slipperiness is concerned, it was shown that it was comparatively safe for the ordinary motions even though the surface was wet.
수중관람창의 판 두께산정식의 유효성을 판단하기 위하여 ISO기준과 일본기준을 비교하고 쌍동선에 설치되는 관람창의 안전성을 평가하기 위해 상용 유한요소해석 프로그램인 ABAQUS를 이용하여 Plexiglass의 두께를 산정하였다. 그 결과를 KS V ISO 12216:2005에 제시된 응력과 처짐에 의한 두께 산정 기준에 따라 관람창의 압력시험을 실시하여 유한요소해석의 적합성을 판단하였다. 또한, 선박과 관람창 연결부(Framing부)는 ISO 11336-1:2012(E)에서 제시된 6가지의 Type중 볼트가 체결된 4가지 경우에 대한 구조해석을 실시하여 연결부의 타입을 결정하였다.
소프트웨어의 신뢰성을 정량적으로 평가하는 데 있어서 소프트웨어 개발 프로세스의 시험단계나 사용자의 운용단계에 처한 동적 환경상태에서 소프트웨어 고장발생기능 현상을 기술한 소프트웨어 신뢰도성장모델을 많이 제안하고 있다. 대다수의 모델이 발생된 소프트웨어 고장의 발생원인에 대한 완전한 수정을 요구하는 완전 디버깅 환경을 가정하고 있다. 그러나 실제 개발자가 디버깅 작업을 수행할 때 완전한 수정이 불가능하기 때문이다. 다시 말해서 여러 소프트웨어 개발자가 경험한 이러한 디버깅 작업을 행하는 경우에는 결함을 제거하는 데 한계가 있기 때문에 수정 작업시 새로운 결함이 삽입되는 경우가 많다. 즉, 결함 수정은 불완전 환경에 처한다. 본 논문에서는 결함 수정시 신규 결함의 삽입 가능성을 고려하고 불완전 디버깅 환경에 대한 소프트웨어 신뢰도 성장모델을 제안한다. 소프트웨어 동작 환경 하에서 발생된 소프트웨어 고장과 시험 전 소프트웨어 내의 고유 결함에 의한 고장과 동작중에 랜덤하게 삽입된 결함에 의해 발생되는 고장 등 2종류의 결함을 고려하여 비동차 포아송과정(NHPP)에 의한 소프트웨어 고장발생 현상을 기술한다. 또한 소프트웨어 신뢰성 평가에 유용한 정량적인 척도를 도출하고 실측 데이터를 이용하여 적용한 결과를 제시하고 기존의 모델과의 적합성을 비교, 분석한다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.