• Journal of the Korean earth science society
• /
• v.21 no.4
• /
• pp.423-436
• /
• 2000

The lithofacies, biofacies, and paleosol development of the Jindong Formation, the Geoncheonri Formation, and the lacustrine deposits of Mt. Hwangryeong at Pusan, which occur in the southeastern part of the Gyeongsang Basin, were analyzed in comparative sedimentology and in stratigraphy. The common features of these lacustrine deposits are: 1) clastic deposits are prevailing, 2) deltaic deposits are not associated, 3) mudflat deposits are common, and 4) stromatolites are absent. The distinct differences among these deposits are: 1) in the Jindong Formation, the mudflat deposits are predominant, pedogenic calcretes are commonly present, and dinosaur tracks frequently occur, compared with other two lacustrine deposits, and 2) in the Geoncheonri Formation, invertebrate fossils are relatively common and storm deposits are not recognized, compared with other deposits, and 3) evaporite mineral casts and tuffaceous turbidite deposits are common in the Mt. Hwangryeong lacustrine deposits. In stratigraphy, the Geoncheonri Formation is correlated with the lower part of the Jindong Formation, and the Mt. Hwangryeong lacutsrine deposits are deemed to overlie the Jindong Formation. On the basis of comparative sedimentology and stratigraphic relationship among these lacustrine deposits, general paleoenvironements of the southeastern part of the Gyeongsang Basin from the late Hayang time to the early Yucheon time are interpreted as follows. During the late Hayang time, tectonic and volcanic activities were generally inacitive in the Gyeongsang Basin, and lacustrine environments expanded since the paleoclimatic condition became less arid compared with the middle Hayang time. In general, however, paleoclimate during the late Hayang time was still arid, and wetting and drying periods were alternated. The occasional occurrences of severe droughts were also characteristic of the late Hayang time. Mudflats existed in wide area in the southeastern part of the Gyeongsang Basin during the late Hayang time, and sedimentation rate was accordingly low. The sedimentation rate became relatively high during the latest Hayang time and the early Yucheon time since tectonic and volcanic activities had been active. Generally arid climate continued for the early Yucheon time, enough for evaporite minerals to precipate occasionally.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.2
• /
• pp.265-270
• /
• 2013

Strength design for a lightweight bicycle frame made of carbon/epoxy composite laminates was studied using Tsai-Wu's failure criterion. For the design of bicycle frames, reducing the weight of the frame is of great importance. Furthermore, the frame should satisfy the required strength under specific loading cases. In accordance with the European EN 14764 standard for bicycle frames, three loading cases-pedaling, vertical, and level loadings-were investigated in this study. Because of the anisotropic characteristics of composite materials, it is important to decide the appropriate stacking sequence and the number of layers to be used in the composite bicycle frame. From finite element analysis results, the most suitable stacking sequence of the fiber orientation and the number of layers were determined. The stacking sequences of $[0]_{8n}$, $[90]_{8n}$, $[0/90]_{2ns}$, $[{\pm}45]_{2ns}$, $[0/{\pm}45/90]_{ns}$ (n = 1, 2, 3, 4) were used in the analysis. The results indicated that the $[0/{\pm}45/90]_{3s}$ lay-up model was suitable for a composite bicycle frame. Furthermore, the weakest point and layer were investigated.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.2
• /
• pp.143-150
• /
• 2015

At present, the actual condition is that Korean modular structures are limited to a low rise detached house and military barracks. And there is no standardized structural design method of stacked modular structure. Accordingly, in general, they don't review impact force in the stage of stacking and installing a module, the effect which wind load has on a structure in the stage of lifting, and inertial force occurring in the stage of lifting or transporting a module in the process of constructing a structure. Therefore, this study investigated the construction method of modular system to be studied in stages, and decided on the position to which load was applied and boundary condition in structural analysis at each construction stage. Besides, inertial force according to each speed was calculated in the lifting and wheeled transport of module. And we calculated impact load according to lifting speed in module stacking and installation work and wind load due to instantaneous wind speed in the installation work by lifting. On the basis of the suggested method, in the modular system to be studied, it carried out review of structure by changing determining conditions of load being applied by construction stage, such as in the stage of lifting, in the stage of transport, and in the stage of installation, and drew construction conditions securing stability structurally.

• Composites Research
• /
• v.12 no.4
• /
• pp.17-24
• /
• 1999

Finite element analysis and experiment are performed to investigate residual deformation induced by the repair of composite shell structures using a prepreg patch method. The finite element program is developed on the basis of a three-dimensional degenerated shell element and the first order shear deformation theory. The results analyzed for the laminated shell with free boundary conditions are compared with strains measured during the prepreg patch repair. Final residual stresses occur greatly near the patch when the laminated shell with all edges clamped is repaired using the prepreg patch. Stacking sequences of the laminated shell and patch affect significantly the residual stresses which occur even if they are the same.

• Journal of Korean Society of Steel Construction
• /
• v.11 no.2 s.39
• /
• pp.117-129
• /
• 1999

The objective of this study is to identify the advantages of composite materials and to investigate the behavior of the anisotropic symmetric laminated cylindrical shell structures. To analyze the anisotropic symmetric laminated cylindrical shell structures, the finite difference technique. that consists of forward, central and backward difference, is introduced. In this study, the degree of freedom consists of three displacements and, especially, two moments except twisting moment. It has the advantage of improving the accuracy for calculating the moments. All four edges are assumed to be simply supported. From the numerical results, it is proved that the finite difference technique can be used efficiently to analyze the anisotropic symmetric laminated cylindrical shells and gives a guide in deciding how to make use of the fiber angle the anisotropic symmetric laminated cylindrical shells.

• Journal of Korean Society of Steel Construction
• /
• v.10 no.4 s.37
• /
• pp.691-700
• /
• 1998

Based on Von Karman-Donnell kinematic assumptions for laminated shells, the nonlinear vibration behaviour of antisymmetrically or asymmetrically laminated cross-ply circular cylindrical shells with clamped and simply-supported ends are studied by a multi-mode approach. A equation is formulated and satisfies the associated compatibility equation and all boundary conditions. The displacement function is assumed to take the form of the lowest linear vibration mode and to satisfy continuity of the circumferential displacement. The nonlinear vibration equation is derived by the Galerkin's method. And nonlinear frequency is obtained by using the harmonic balance method as a function of lamination parameters, material constants, aspect ratio and amplitude of vibration. The effect of initial imperfection is also included. Results of the non-linear vibration are presented for different amplitudes of initial imperfection and four sets of boundary conditions. Present results are compared well with existing analysis results.

• ETRI Journal
• /
• v.13 no.2
• /
• pp.70-79
• /
• 1991

본 기초연구에서는 Langmuir-Blodgett technique의 기술현황을 정리하고 기본적인 증착조건에 관한 실험 및 증착된 막의 분석을 행하였다. Langmuir-Blodgett technique은 유기물을 nm정도까지 얇고 균일하게 입힐 수 있는 장점이 있기 때문에 tunneling barrier로서 전자소자에 응용 가능성이 높고, 분자의 배열을 조절할 수 있는 능력을 이용하여 2차 비선형계수를 이용한 광학소자에 높은 잠재력을 지니고 있다. 이 성질을 이용하기 위하여 Ba stearate 와 pentacosa diynoic acid막을 이용하여 기본적인 실험을 하고 그 막을 XRD와 ellipsometer 그리고 Nomarsky 현미경 등을 이용하여 분석하였다. 그 결과 LB막은 subphase의 pH와 온도의 영향을 받음을 알 수 있었으며, 위의 분석방법을 이용하여 양질의 막을 얻을 수 있는 조건을 제시하였다.

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2003.10a
• /
• pp.56-60
• /
• 2003

폐 적층세라믹콘덴서(MLCC)로부터 Ni을 회수하기 위하여 침출실험을 수행하였다. 침출용매로 $HNO_3,\;HCl\;H_2SO_4$을 사용하여 시간의 변화, 반응온도의 변화, 시료 입도와 광액농도의 변화가 Ni의 침출율에 미치는 영향과 최적 침출 조건을 조사하였다. 그 결과 HCl, $H_2SO_4$을 침출용매로 사용했을 때 Ni 침출의 최적 조건은 산농도 5M, 반응온도 $90^{\circ}C$나타났으며, $HNO_3$을 침출용매로 사용했을 때 최적 침출 조건 산농도 1M, 반응온도 $70^{\circ}C$에서 광액농도 500ml당 20g일때 Ni 침출율이 98%로 최대였다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.4
• /
• pp.670-674
• /
• 1988

Vibration characteristics of laminated circular cylindrical shells are investigated using a theoretical procedure developed in the previous papers. Numerical results are presented for a family of graphite-epoxy cylindrical shells with layers of angle-ply and cross-ply laminated either symmetrically or antisymmetrical about the shell middle surface. Effects of the different shell boundary conditions and geometries, as well as number and angle of orientation of the lamina, on the natural frequencies are also demonstrated.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.11a
• /
• pp.46.2-46.2
• /
• 2009

휴대전화, 랩톱 컴퓨터 등 각종 모바일기기 및 디스플레이 기기의 경박단소화 및 고기능화에 따라 연성회로기판(FPCB)의 사용량이 증가하고있다. 연성회로기판의 핵심소재인 동박적층필름(FCCL)은 폴리이미드필름과 접착층, Cu 층으로 구성되는데, 이 중접착층으로 사용되는 Ni-20Cr합금은 에칭공정 후 Cr의 잔류에 의해 불량률 증가가 문제되고 있어, Ni-Cr합금 스퍼터링 타깃의 Cr 함량 저감 또는 Cr-free Ni합금 개발 등이 요구되고 있다. 본 연구에서는 차세대 FCCL 본드층에 적합한 Ni기 합금을 개발하기 위한 기초연구로써 Cr 함량 및 가공열처리조건에 따른 미세조직과 집합조직 변화를 조사하였다. 4N급의 고순도Ni과 Cr을 진공 플라즈마 용해장치로 용해하여Ni-xCr (x=5, 10, 15, 20wt.%)합금 잉곳을 만들고, 이를 두께감소율 90%로 냉간압연한 후, $600^{\circ}C$ 및 $800^{\circ}C$에서 10~120분 동안 어닐링하여 시편을 준비하였다. 광학현미경으로 미세조직을 관찰하고, Micro-Vickers 경도시험을 통해 어닐링 조건에 따른 경도변화를 조사하였다. 또한 SEM-EBSD를 이용하여 집합조직 및 입계특성을 분석하였다. $600^{\circ}C$ 어닐링 시 Cr함량이 증가할수록 재결정 완료시간이 증가하여 Ni-20Cr합금의 경우 2시간이상 어닐링에도 재결정이 일어나지 않았다. $800^{\circ}C$ 어닐링 시 10분 어닐링 조건에서 4종류 합금 모두 재결정이 완료되었으며, 동일한 어닐링 조건에서 Cr함량이 증가할수록 결정립이 작아지는 것으로 나타났다. $800^{\circ}C$ 2시간 어닐링 조건에서 Ni-5Cr 합금의 주요 집합조직은 {223}<113>과 {122}<112>로 나타났으며, 이중 {223}<113>은Cr 함량이 증가함에 따라 점차 {122}<112>에 가까운 방향으로 변화되어 Ni-20Cr 합금의 경우 {123}<112>만이 형성되었다. 이러한 집합조직의 변화는 적층결함에너지 감소에 의한 ${\Sigma}3$ 입계의 분율 증가와 밀접한 관련이 있는 것으로 사료된다.