• Title/Summary/Keyword: 적층성장

Search Result 178, Processing Time 0.023 seconds

수직방향으로 적층된 InAs 양자점의 광학적 특성

  • 김광무;노정현;박영민;박용주;나종범;김은규;방정호
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 1999.07a
    • /
    • pp.93-93
    • /
    • 1999
  • 양자점(Quantum dot : QD)를 이용한 소자를 만들기 위해서는 수직방향으로의 적층이 필수적이다. 양자점의 적층은 수직적으로 같은 위치에 정렬하므로, 고려되어야 할 요소로는 양자점간의 파동함수의 중첩(coupling)에 의한 특성변화, 적층의 진행에 따른 변형(strain)의 증가로 기인되는 volcano 모양으로 나타나는 결함등이 있다. 이러한 결함은 nonradiative recombination center로 작용하여 오히려 효율이 떨어지게 되는 현상이 발생하게 되므로 본 연구에서는 적층횟수에 따른 발광효율의 변화를 조사하여 소자응용에 적절한 적층 조건을 조사하였다. 시료성장은 molecular beam epitaxy (MBE) 장치를 이용하여 GAs(100) 기판위에 GaAs buffer를 58$0^{\circ}C$에서 150nm 성장후 InAs/GaAs 양자점과 50$0^{\circ}C$에서 적층회수 1, 3, 6, 10, 15, 20회로 하였으며 적층성장 이후 GaAs cap layer를 성장하였다. GaAs spacing과 cap layer의 성장온도 역시 50$0^{\circ}C$이며 시료의 분석은 photoluminescence (PL)과 scanning transmission electron microscope (STEM)으로 하였다. 적층횟수를 바꾸어 시료를 성장하기 전에 적층횟수를 10회로 고정하고 spacing 두께를 2.8nm, 5.6nm, 11.2nm로 바꾸어 성장하여 PL 특성을 관찰하여본 결과 spacing이 2.8nm인 경우 수직적으로 정렬된 양자점 간에 coupling이 매우 커서 single layer QD의 PL peak에 비해 약 100nm 정도 파장이 증가하였고, spacing의 두께가 11.2nm 일 경우는 single layer QD와 거의 같은 파장의 빛을 방출하여 중첩이 거의 일어나지 않지만 두꺼운 spacing때문에 PL세기가 감소하였다. 한편, 적층회수에 따른 광학적 특성을 PL로 조사하여 본 결과 peak 파장은 적층횟수가 1회에서 3회로 증가했을 때는 blue shift 하다가 이후 적층이 증가함에 따라 red shift 하였다. 그리고 10층 이상의 적층에서는 excited state에서 기인된 peak이 검출되었다. 이렇나 원인은 적층수가 증가함에 따라 carrier life time이 증가하여 exciter state에 carrier가 존재할 확률이 증가하기 때문으로 생각된다. 또한 PL 세기가 다소 증가하다가 10층 이상의 경우는 다시 감소함을 알 수 있었다. 반치폭도 3층과 6층에서 가장 적은 값을 보였다. 이와 같은 결과는 결함생성과 관련하여 STEM 분석으로 해석되어질 수 있는데 6층 적층시는 양자점이 수직적으로 정렬되어 잘 형성됨을 관찰할 수 있었고 적층에 따른 크기 변화도 거의 나타나지 않았다. 그러나 10층 15층 적층시 몇가지 결함이 형성됨을 볼수 있었고 양자점의 정렬도 완전하게 이루어지지 않음을 볼 수 있었다. 그러므로 수직적층된 InAs 양자점의 광학적 특성은 성장조건에 따른 결함생성과 밀접한 관련이 있으며 상세한 논의가 이루어질 것이다.

  • PDF

MOCVD를 이용한 자발성장 InAs 양자점의 적층 성장 시 발생하는 파장변화량 제어

  • Choe, Jang-Hui;An, Seong-Su;Yu, Su-Gyeong;Lee, Jong-Min;Park, Jae-Gyu;Lee, Dong-Han;Jo, Byeong-Gu;Han, Won-Seok
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2011.02a
    • /
    • pp.150-151
    • /
    • 2011
  • 양자점 Laser Diode(LD)는 낮은 문턱전류, 높은 미분 이득을 갖으며 또한 온도변화에도 안정적이기 때문에 광통신분야에서 광원으로 양자점 LD를 사용하기 위한 연구가 계속되고 있다. 양자점은 fill factor가 낮기 때문에 양자점의 밀도를 높이거나 양자점을 적층 성장하여 fill factor를 높인다. 그러나 양자점을 적층 성장하면 각 층간의 응력, 수직적 결합, 전기적인 결합이 생기며 이는 양자점의 전기적, 광학적 특성에 영향을 미친다. 본 연구에서는 metal organic chemical vapor deposition (MOCVD)을 이용하여 InP기판 위에 자발성장 법으로 InAs 양자점을 다주기 성장하였으며 photoluminescence (PL)을 이용하여 광학적 특성을 분석하였다. precursor는 trimethylindium (TMI), trimethylgalium (TMGa), $PH_3$, $AsH_3$를 사용하였으며 carrier gas는 $H_2$를 사용하였다. InAs 양자점은 1100 nm의 파장을 갖는 InGaAsP barrier 위에 성장하였고, InAs와 InGaAsP의 성장온도는 $520^{\circ}C$이며 InAs 양자점 성장시 V/III 비는 3.66으로 일정하게 유지하였다. 그림 1은 양자점 성장시간을 0.11분으로 고정하여 3주기(A), 5주기(B), 8주기(C) 성장한 구조이며 그림 2는 양자점 성장시간을 3주기마다 0.01분씩 줄여가며 3주기는 0.11분${\times}$3(D), 6주기는 0.11분${\times}$3+0.10분${\times}$3(E), 9주기는 0.11분${\times}$3+0.10분${\times}$3+0.09분${\times}$3(F) 으로 성장한 성장구조이다. 각 성장한 시료는 PL을 이용하여 파장과 반치폭을 측정하였다. 그림 3은 양자점 성장시간을 고정한 시료 A, B, C의 PL파장과 PL반치폭 데이터이다. PL파장은 A, B, C 시료 각각 1504 nm, 1571 nm, 1702 nm이며 반치폭은 각각 140 meV, 140 meV, 150 meV이다. PL파장과 반치폭은 각각 3주기에서 6주기로 증가할 때 67 nm, 0 meV 6주기에서 9주기로 증가할 때는 131 nm, 10 meV 증가하였다. 다음 그림4는 양자점 성장시간을 조절하여 성장한 양자점 시료 D, E, F의 PL파장과 PL반치폭 데이터이다. PL파장은 D, E, F 시료 각각 1509 nm, 1556 nm, 1535 nm이며 반치폭은 각각 137 meV, 138 meV, 144 meV이다. PL파장과 반치폭은 각각 3주기에서 6주기로 증가할 때 47 nm, 1 meV 증가하였고, 6주기에서 9주기로 증가할 때는 21 nm 감소, 6 meV 증가하였다. 양자점 성장시간을 고정하여 다주기를 성장하였고 또 3주기마다 양자점 성장시간을 달리하여 다주기를 성장하였으며 PL을 이용해 광학적 특성을 연구하였다. 성장된 양자점의 PL 파장과 PL 반치폭 변화를 통해 적층구조에서 성장 주기가 늘어날수록 양자점의 크기가 증가하는 것을 확인하였고 또한 적층성장을 할 때 양자점 성장시간을 줄임으로써 양자점의 크기 변화를 제어 할 수 있었다.

  • PDF

Out-of-plane twin 구조를 갖는 $LaAlO_3$기판 상의 La-Ca-Mn-O 박막 적층 성장 분석

  • 송재훈;최덕균;정형진;최원국
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 1999.07a
    • /
    • pp.145-145
    • /
    • 1999
  • La-Ca-Mn-O (LCMO) 박막에서 초거대 자기 저항 효과와 발견된 이후 자기 센서와 고밀도 자기 저장 매체로서 응용하기 위한 연구가 진행되고 있다. 그러나 현재 대부분의 증착은 타겟과 박막간의 조성의 일치를 위하여 PLD 방법을 이용하고 있으며 RF magnetron sputtering 법으로 증착한 예는 많이 보고되고 있지 않으며 특히 적층 성장시킨 예는 아직 보고되지 있지 않다. 또한 LCMO와의 낮은 격자 상수 불일치를 보이는 SrTiO3와 LaAlO3 기판에 LCMO 박막을 성장시킬 경우 LaAlO3의 경우 XRD rocking curve의 curve의 FWHM 값이 SrTiO3 상에 증착시킨 것의 10배 이상의 값을 보인다는 것은 주목할 만한 사실이다. RF magnetron sputtering 법을 이용하여 LaAlO3 기판상에 145nm MCMO 박막을 적층성장시켰다. XRD $ heta$-2$\theta$ scan을 통해 박막이 c-축 배향한 것을 확인할 수 있었으며 RBS 분석결과 4.98%의 minimumyield를 보였으며 이로부터 박막이 적층성장한 것을 확인할 수 있었다. LCMO (200) peak의 XRD $\theta$-rocking 결과 FWHM의 값은 0.311$^{\circ}$를 보였으나 2개의 피크가 존재하는 것을 볼 수 있었다. 따라서 기판의 (200) 피크를 XRD $\theta$-2$\theta$ scan에서 0.3$^{\circ}$ 간격으로 두 개의 피크를 관찰할 수 있었는데 이는 기판과 박막간의 stress로 인한 tetragonal distortion에 의한 것으로 알려져 있었다. 따라서 기판상에 박막이 어떤 식으로 적층 성장되었는지를 RBS를 이용하여 <001>과 <011> 방향으로 2MeV He++를 주입하여 0.1$^{\circ}$ 간격으로 틸팅을 해본 결과 <001> 방향에서는 1.12$^{\circ}$의 차이를 보였다. 이는 기판과의 compressive stress로 인해 c축 방향으로 늘어났으며 stress relaxed layer는 XRD 결과와는 달리 관찰할 수 없었다. 이러한 현상의 기판 자체의 twin 구조로 인한 것으로 생각된다. RBS 분석후 고분해능 XRD를 이용해 LCMO (200) peak의 $\theta$-rocking 결과 이제R지 laAlO3 상 증착한 LCMO의 값으로는 제일 작은 0.147$^{\circ}$를 나타내었다.

  • PDF

The Study on the Characteristics of Mode I Crack for Cross-ply Carbon/Epoxy Composite Laminates Based on Stress Fields (응력장을 이용한 직교적층 탄소섬유/에폭시 복합재 적층판의 모드 I 균열 특성 연구)

  • Kang, Min-Song;Jeon, Min-Hyeok;Kim, In-Gul;Woo, Kyeong-Sik
    • Composites Research
    • /
    • v.32 no.6
    • /
    • pp.327-334
    • /
    • 2019
  • The delamination is a special mode of failure occurring in composite laminates. Several numerical studies with finite element analysis have been carried out on the delamination behavior of unidirectional composite laminates. On the other hand, the fracture for the multi-directional composite laminates may occur not only along the resin-fiber interface between plies known as interply or interlaminar fracture but also within a ply known as interyarn or intralaminar fracture accompanied by matrix cracking and fiber bridging. In addition, interlaminar and intralaminar cracks appear at irregular proportions and intralaminar cracks proceeded at arbitrary angle. The probabilistic analysis method for the prediction of crack growth behavior within a layer is more advantageous than the deterministic analysis method. In this paper, we analyze the crack path when the mode I load is applied to the cross-ply carbon/epoxy composite laminates and collect and analyze the probability data to be used as the basis of the probabilistic analysis in the future. Two criteria for the theoretical analysis of the crack growth direction were proposed by analyzing the stress field at the crack tip of orthotropic materials. Using the proposed method, the crack growth directions of the cross-ply carbon/epoxy laminates were analyzed qualitatively and quantitatively and compared with experimental results.

BS/channeling studies on the heteroepitaxially grown $Y_2O_3$ films on Si substrates by UHV-ICB deposition (실리콘 기판 위에 UHV-ICB 증착법으로 적층 성장된 $Y_2O_3$박막의 BS/channeling 연구)

  • 김효배;조만호;황보상우;최성창;최원국;오정아;송종한;황정남
    • Journal of the Korean Vacuum Society
    • /
    • v.6 no.3
    • /
    • pp.235-241
    • /
    • 1997
  • The crystallinity and the structure of heteroepitaxially grown $Y_2O_3$ films on the silicon substrates deposited by Ultra High Vacuum Ionized Cluster Beam(UHV-ICB) were investigated by Back-scattering Spectroscopy(BS)/channeling. The channeling minimum values, $X_{min}$, of the $Y_2O_3$ films deposited by other methods were 0.8~0.95 up to the present, which indicates amorphous or highly polycrystalline nature of the $Y_2O_3$ films. On the contrary, the channeling minimum value of heteroepitaxially grown $Y_2O_3$ films on Si(100) and Si(111) deposited by UHV-ICB are 0.28 and 0.25 respectively. These results point out fairly good crystalline quality. It is also observed that the top region of $Y_2O_3$ films have less crystalline defects than the bottom region regardless of the crystal direction of the Si substrates. The axis of $Y_2O_3$<111> epitaxially grown on Si(111) is tilt by $0.1^{\circ}$ with respect to Si<111>. That of $Y_2O_3$<110> on Si(100) is parallel to the Si<001>. The $Y_2O_3$ film on Si(100) grew with single domain structure and that on Si(111) grew with double domain structure. From the result of oxygen resonance BS/channeling, the oxygen atoms in heteroepitaxially grown $Y_2O_3$ film on Si(111) substrate have the crystallinity, but that on Si(100) shows almost channeling amorphous state.

  • PDF

Synthesis of Silicon Carbide Whiskers (II): Stacking Faults (탄화규소 휘스커의 (II): 적층결함)

  • 최헌진;이준근
    • Journal of the Korean Ceramic Society
    • /
    • v.36 no.1
    • /
    • pp.36-42
    • /
    • 1999
  • Stacking faults in SiC whiskers grown by three different growth mechanisms; vapor-solid(VS), two-stage growth(TS), and vapor-liquid-solid (VLS) mechanism in the carbothermal reduction system were investigated by X-ray diffraction(XRD) and transmission electron microscopy (TEM). The content of stacking faults in SiC whiskers increased with decreasing the diameter of whiskers, i.e., the small diameter whiskers (<1 $\mu\textrm{m}$) grown by the VS, TS, and VLS mechanisms have heavy stacking faults whereas the large diameter whiskers(>2$\mu\textrm{m}$) grown by the VLS mechanism have little stacking faults. Heavy stacking faults of small diameter whiskers was probably due to the high specific lateral surface area of small diameter whiskers.

  • PDF

Growth of artificial Pb$ZrO_3$/Pb$TiO_3$ superlattices by pulsed laser deposition and their electrical properties (펄스레이져 증착법을 이용한 Pb$ZrO_3$/Pb$TiO_3$ 산화물 인공격자의 성장 및 전기적 특성)

  • 최택집;이광열;이재찬
    • Proceedings of the Materials Research Society of Korea Conference
    • /
    • 2003.11a
    • /
    • pp.54-54
    • /
    • 2003
  • 최근 새로운 개념에 물성 구현을 위한 강유전체 산화물 인공격자의 연구가 활발히 진행되고 있다. 본 연구에서는 펄스레이져 증착법을 이용하여 산소분압 100 mTorr와 증착온도 50$0^{\circ}C$에서 LSCO/MgO 기판 위에 PbTiO$_3$(PTO) 와 PbZrO$_3$(PZO)을 주기적으로 적층하여 강유전체 산화물 인공격자를 형성하였다. 인공격자의 주기는 1~100 unitcell 까지 변화시켰다. 적층주기와 두께 변화에 따른 PZO/PTO 인공격자의 성장과 전기적 특성에 대하여 관찰하였다. X선 회절분석을 통하여 PZO/PTO 인공격자는 주기가 25 unit cell 이하의 적층구조에서 초격자의 형성으로 인한 위성피크가 관찰되었으며, 그 이하의 낮은 주기(1~10 unitcell)에서는 위성피크와 강한 (100)과 (200) 성장거동을 보였다. 높은 주기에서는 c축 성장된 PTO와 a축 성장된 PZO 각각의 성장거동을 보였다. 적층 주기가 감소함에 따라 a축 성장된 PTO와 c축 성장된 PZO가 초격자를 형성하였다. 적층주기가 감소함에 따라 유전상수와 잔류분극값이 향상되었다. 유전상수는 1 unitcell 주기에서 800정도의 값을 보였고, 잔류분극값은 2 unitcell 주기에서 2Pr=38.7 $\mu$C/$\textrm{cm}^2$ 정도의 가장 큰 값을 나타냈다. 적층주기가 2 unitcell에서 두께가 감소함에 따라 유전상수가 감소하였고, 20 nm 까지 분극반전에 의한 capacitance-voltage 특성곡선의 이력 현상(강유전성)을 관찰하였다. 이러한 산화물 인공초격자에서의 유전상수와 잔류분극값의 향상에 대하여 논의 할 것이며, 임계크기효과 관점에서 나노사이즈(50 nm~5 nm)에서 인공초격자의 전기적 분극의 안정성에 대하여 또한 논의 할 것이다.소수성 가스의 경우70% 이상 향상되었음을 알 수 있었으며, 본 연구를 통해 광분해를 이용한 스크러버가 기존설비의 장.단점을 충분히 보완 가능한 환경 설비임을 확인할 수 있었다. duty로 구동하였으며, duty비 증가에 따라 pulse의 on-time을 고정하고 frequency를 변화시켰다. dc까지 duty비가 증가됨에 따라 방출전류의 양이 선형적으로 증가하였다. 전압을 일정하게 고정시키고 각 duty비에서 시간에 따라 방출전류를 측정한 결과 duty비가 높을수록 방출전류가 시간에 따라 급격히 감소하였다. 각 duty비에서 방출전류의 양이 1/2로 감소하는 시점을 에미터의 수명으로 볼 때 duty비 대 에미터 수명관계를 구해 높은 duty비에서 전계방출을 시킴으로써 실제의 구동조건인 낮은 duty비에서의 수명을 단시간에 예측할 수 있었다. 단속적으로 일어난 것으로 생각된다.리 폐 관류는 정맥주입 방법에 비해 고농도의 cisplatin 투여로 인한 다른 장기에서의 농도 증가 없이 폐 조직에 약 50배 정도의 고농도 cisplatin을 투여할 수 있었으며, 또한 분리 폐 관류 시 cisplatin에 의한 직접적 폐 독성은 발견되지 않았다이 낮았으나 통계학적 의의는 없었다[10.0%(4/40) : 8.2%(20/244), p>0.05]. 결론: 비디오흉강경술에서 재발을 낮추기 위해 수술시 폐야 전체를 관찰하여 존재하는 폐기포를 놓치지 않는 것이 중요하며, 폐기포를 확인하지 못한 경우와 이차성 자연기흉에 대해서는 흉막유착술에 더 세심한 주의가 필요하다는 것을 확인하였다. 비디오흉강경수술은 통증이 적고, 입원기간이 짧고, 사회로의 복귀가 빠르며, 고위험군에 적용할 수 있고, 무엇보다도 미용상의 이점이 크다는 면에서 자연기흉에 대해 유용한 치료방법임에는 틀림이 없으나 개흉술에 비해 재발율이 높고 비용이 비싸다는 문제가 제기되고 있는 만큼 더 세심한 주의와 장기 추적관찰이 필요하리라 사료된

  • PDF

The effect of cooling rate on the nuclei of OISF formation in Si single crystals (실리콘 단결정에서 산화적층결함의 핵생성에 미치는 냉각속도의 영향)

  • 하태석;김병국;김종관;윤종규
    • Journal of the Korean Crystal Growth and Crystal Technology
    • /
    • v.6 no.3
    • /
    • pp.360-367
    • /
    • 1996
  • The OISF (Oxidation Induced Stacking Fault)is expected to affect the electrical properties in Si single crystals, and the nuclei of OISF are believed to be formed during the crystal growing process. Initial oxygen concentration, dopant type and its density, and cooling rate are regareded as major factors on OISF formation. In this study, the variations of OISF density under various cooling rate were investigated. Si single crystal was heated to $1400^{\circ}C$ in Ar ambient and cooled down to room temperature at different cooling rate, using horizontal tube furnace. After that, they were oxidized at $1150^{\circ}C$, and then, OISF was observed with optical microscope. The relation between oxide procipitates and OISF nucleation was investigated by FTIR analysis. As a result, it was found that there exists the intermediate cooling rate range in which OISF nucleation is highly enhanced. And also, it was found that OISF nucleation is closely related with silicon oxide procipitation in Si single crystals.

  • PDF