• Horticultural Science & Technology
• /
• v.30 no.4
• /
• pp.357-362
• /
• 2012

Proper light intensity, shading tolerance, potting media, and fertilization level were investigated to develop Orostachys iwarenge for. magnus (Korean name, Ullungyeonwhabawisol) as a potted ornamental plant. The plants were grown under different light intensity (52, 82, 90, and 97% shading). The best growth was shown at 52% shading, which indicated that the proper light intensity for O. iwarenge for. magnus is less than 52% of shading. Plant growth decreased severely at 82% shading and leaf color became lighter as the shading rate increased, which indicated that O. iwarenge for. magnus has no tolerance against low light intensity. To select a proper potting media, decomposed granite (DG), fertilizer-amended media (FAM), river sand (RS) were used as potting medium with different ratio of 60:20:20 (DG:FAM:RS, v/v/v), 80:20 (DG:FAM, v/v), 60:40 (DG:FAM, v/v), and 20:80 (FAM:RS, v/v). DG:FAM:RS (60:20:20) showed the highest values in shoot fresh weight, plant width, and number of runner in potted O. iwarenge for. magnus. Fresh weight of shoot part was 16 g in DG:FAM:RS (60:20:20), which was about 2 folds of those at the other medium. At the experiment for selection of proper fertilization level, plants showed a better growth as the concentration of hyponex solution and application frequency increased. Once drenching 1 week interval of hyponex solution diluted by 1,000 folds brought the highest results in fresh weight, plant width, and runner number. Particularly, fresh weight of shoot part was 35 g at once drenching per week of 1,000 folds solution, indicating 84% improvement comparing with non treatment (19 g).

• Journal of Animal Science and Technology
• /
• v.53 no.5
• /
• pp.441-450
• /
• 2011

This study was conducted to determine the effects of partial replacement of corn grain and soybean meal with agricultural by-product feeds on in vitro rumen fermentation characteristics and optimum levels of mixing ratio. The agricultural by-products to examine the effectiveness of the partial replacement of concentrate were wheat bran, corn gluten feed, bakery waste, soybean curd, rice bran, green kernel rice, soybean hull, distillers' grain, and mushroom substrate. In the first experiment, in vitro ruminal fermentation characteristics of feedstuffs were evaluated at 0, 3, 6, 12, 24, and 48 hours after incubation. In the second experiment, fermentation characteristics were investigated with green kernel rice and soybean curd which replaced corn grain or soybean meal. Feed were formulated with 40% corn grain + 20% soybean meal (T1), 40% corn grain + 17.5% soybean meal + 2.5% soybean curd (T2), 25% corn grain + 20% soybean meal + 15% green kernel rice (T3), and 30% corn grain + 15% soybean meal + 6% green kernel rice + 9% soybean curd (T4), respectively, with forage source of 10% alfalfa hay, 20% timothy hay, and 10% corn silage as fed-basis. In 24 and 48 hour cultivations, T4 showed significantly lower pH compared to T1, whereas in 3 and 24 hour cultivations, T4 showed significantly higher DM degradation compared to T1. In addition, the gas production of T3 was also higher than T1 (p<0.05). Overall results of the present experiments indicated that green kernel rice and soybean curd as agricultural by-products have the possibility of partial replacements of corn grain and soybean meal.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.1
• /
• pp.126-138
• /
• 2017

This study was conducted to investigate the potential of chicken feather (CF), which is a by-product in poultry industry, as a raw material of wood adhesives. For the purpose, adhesive resins were formulated with NaOH- and $H_2SO_4$-hydrolyzed CF as well as crosslinkers, and then the properties and water resistance of the adhesive resins against hot water were measured. CF was made of mainly keratin-type protein, and no or very low content of heavy metals was detected. Hydrolysis rate of CF increased as NaOH concentration in hydrolysis solutions increased. However, in order to minimize the loss of adhesive property of protein itself by the severe hydrolysis of CF and to seek its proper hydrolysis conditions, NaOH concentrations in hydrolysis solution determined to adjust to 5%, 7.5% and 10%. In the NaOH-hydrolyzed CF, $H_2SO_4$-hydrolyzed CF as a hardener and crosslinker were added to formulate CF-based adhesive resins. Solid content of the resins ranged from 28.3% to 44.8% depending on hydrolysis conditions and type of crosslinker. Viscosity of the resins at $25^{\circ}C$ was very high. However, when the temperature of the resins was increased to $50^{\circ}C$, the viscosity decreased greatly and thus the resins could be applied as a sprayable resin. Retention rate measured to evaluate the water resistance of adhesive resins was the highest in the cured resin formulated with 5% NaOH-hydrolyzed CF and 5% $H_2SO_4$-hydrolyzed CF of 10% based on the solid weight as a hardener. Retention rate depending on crosslinkers added into adhesive resins was the highest phenol-formaldehyde (PF) followed by melamine-urea-formaldehyde (MUF) and formalin. The retention rate of CF-based adhesives formulated with 5% NaOH-hydrolyzed CF, PF and $H_2SO_4$-hydrolyzed CF of 10% and over did not differ statistically from that of commercial MUF resins. All of CF-based adhesives formulated with PF as a crosslinker and one with 5% NaOH-hydrolyzed CF of 55%, 5% $H_2SO_4$-hydrolyzed CF of 15%, and MUF of 30% on the basis of solid weight could be substituted for commercial urea-formaldehyde resins, From the results, CF can be used as a raw material of wood adhesives if hydrolyzed in proper conditions.

• Journal of Animal Science and Technology
• /
• v.44 no.1
• /
• pp.69-74
• /
• 2002

This study was conducted to investigate the milk quality produced from dairy farms in Jeju province and to analyze the variety of pathogenes and the number of somatic cells in the milk. Data were collected from 262 lactating cows from 8 farms of three regions and the results obtained are summarized as follows. 1. The average daily milk yields and milk fat contents from June and October were 22.3 kg and 3.7%, respectively. 2. The average number of bacterial counts in raw milk was 1.5${\times}10^4$/ml, but that in farm A was over 3.0${\times}10^4$/ml. 3. The somatic cell counts were 2.5${\times}10^5$/ml in average and those in farm G and H were higher than those in other farms. Their distribution in 262 lactating cows from June to October was as follows; less than 2.0${\times}10^4$ /ml in 68.8% of cows, 2.0-5.0${\times}10^4$/ml in 18.8% of cows and more than 5.0${\times}10^4$/ml in 12.4% of cows. 4. Of the 113 isolates (compartments of cow udder) from mastitic milk, Staphylococcus aureus was found in 47, Streptococcus ogalatiae in 17 and Bacillus in 12. 5. The average monthly income of the farmers was 407 thousand won/head, and that in farm A or E was higher than that of farm H (456-475 thousand won vs. 314 thousand won) In conclusion, to improve income dairy farmers should reduce the somatic cell counts in the milk and mastitis infection through regular disinfection and inspection.

• Korean journal of food and cookery science
• /
• v.14 no.5
• /
• pp.463-467
• /
• 1998

This study was carried out in order to analyze the changes in general compounds, reducig sugar, nitrogen compounds of traditional Korean soy sauce with varying Meju Type (Traditional Meju, Modified Meju) and ripening periods and to investigate correlation between sensory characteistics via sensory evaluation of soy sauce samples. And to investigate actual conditions and attitude of comsumer of soy suace.

• Fire Science and Engineering
• /
• v.14 no.2
• /
• pp.33-38
• /
• 2000

Flux, essentially used in soldering process of PCB (Printed Circuit Board) in electronics industry, contains IPA (Isopropyl alcohol) and methanol, which are highly inflammable and explosive. Hazard Chemical Controlling Law classified methanol as toxic material and Environmental Law classified methanol as VOC (Volatile Organic Compound). So there have been pressing needs of developing substitutes for the existing Flux. New solvent which is non-flammable and main component is DCP having same specific character of the existing Flux. It's been combirated with proper composition ratio adding stabilizer. As a result, it relieved working Environment Allowance thickness 200 ppm to 470 ppm, chance of not been soldered 0.083% to 0%, spread 85% to 87%, power saving resistance 1.0$\times$$10^{12}$$\Omega$ to 6.9$\times$$10^{12}$$\Omega$, which means a lot better than the existing Flux. Therefore, Flux confirmed the chance of improving productivity, safety, environment safety and quality. Also, Flux got a satisfied result after product quality test and product reliability test.

• Applied Biological Chemistry
• /
• v.41 no.6
• /
• pp.451-456
• /
• 1998

To find out the repeated application effect of chicken and pig manure composts on tomato growth and soil physico-chemical properties, different rates of the composts were applied to greenhouse soils with low fertility for 3 years and tomato was grown annually. As application rate of compost increased, the growth and fruit yield of tomato increased markedly, and there are also a little increase in sugar content in fruit juice and weight per fruit. When only compost was applied, however, physical and chemical properties in soil showed to be unbalanced such as significantly low bulk density and hardness, and high porosity as well as high organic matter and exchangeable K content, and low exchangeable Ca content than those of optimum range for soil diagnosis. Therefore mixed use of compost and chemical fertilizer is more promising way than the only use of compost to make suitable physico-chemical properties for tomato growth.

• Journal of Bio-Environment Control
• /
• v.14 no.2
• /
• pp.114-118
• /
• 2005

The experiment was conducted to establish the blanching culture of chicon expected to become exporting crop, for preventing Korea fiom importing the ffreign chicon and increasing the growers' profits, the days of blanching culture are based on the 5 treatments such as 10 days, 15 days ,20 days, 25 days, and 30 days. In the blanching culture days of chicory, the growth was good as blanching culture days were longer, there were too many outer leaves, and the ratio of bolting was $16\%$ on the 25 days, $30\%$ on the 30days. On the 10th day, the weight of chicon was light, the hardness was low, the density was low. The quality of chicon had no differences among the treatments. Therefore, the optimal condition for blanching culture of chicory is that the days of blanching culture is 20 days.

• Resources Recycling
• /
• v.9 no.3
• /
• pp.22-28
• /
• 2000

A study on the recovery of gallium from zinc residues is carried out by alkali leaching using NaOH. The results show that in case of alkali leaching of zinc residues, Zn, K and Si are mainly leached out and Fe and other base metals are scarcely leached out, which results in that gallium is easily recovered by solvent extraction. The leaching efficiency of gallium increases with increasing alkali concentration and solid density. Especially, alkali consumption is considerably reduced by washing the zinc residues with water before leaching in order to eleminate the soluble zinc compounds. The gallium from zinc residues is found to be leached out with a recovery of 80% or higher for 2hrs leaching with 1~1.25 M/L NaOH solution and solid density 333 g/L at $25^{\circ}C$.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.27-27
• /
• 2009

드라이브 샤프트는 일반적으로 엔진에서 발생된 회전력을 바퀴에 직접 전달하는 동시에 조향기능을 수행하는 자동차 부품이다. 최근에 경량화를 통한 에너지 절감을 위하여 기존 스틸소재를 알루미늄으로 대체하는 방안에 대한 연구가 집중되고 있다. 그러나 알루미늄 단일소재로 드라이브 샤프트를 제조하는 것은 비경제적이며 또한 기 개발된 자동차 부품들과의 연결을 고려하여 알루미늄 튜브와 스틸 요크의 이종금속 접합기술이 요구된다. 전자기 펄스용접은 전자기력을 이용하여 용접대상물을 고속으로 충돌시켜 용접하는 기술로서 열 발생이 적어 재료의 특성차로 인한 결함 및 변형이 발생하지 않아, 이종금속간 고품질 용접이 가능하며, 전자기 펄스 용접부의 품질과 밀접한 관계를 갖는 공정변수 경우 모재와 접합재의 재질 따라 적정 공정변수 범위가 변화되므로 공정에 따른 데이터의 축적은 대단히 중요하다. 전자기 펄스 용접을 이용한 이종금속 접합시 접합부 품질에 영향을 미치는 공정변수는 충전전압, 모재와 접합재 사이의 간격 및 접합재의 직경과 두께의 비(D/T비)로서 보고되었으며, Al/Steel 이종 금속 접합시 이들 공정변수가 접합부에 미치는 영향 및 최적의 공정변수 도출을 위한 연구는 시도되지 않았다. 따라서 본 연구는 전자기 펄스 용접기술을 이용한 Al/Steel 이종금속 접합 실험을 통하여 전자기 펄스용접의 적정성과 최적의 충전전압, 모재와 접합재 사이의 간격, D/T비를 도출하고자 한다. 전자기 펄스 용접 장치는 한국생산기술연구원과 웰메이트(주)에서 공동으로 개발한 $120{\mu}F$의 캐패시터 6개로 구성된 'W-MPW36'을 사용하였으며 이 장치의 최대충전전압과 최대접합용량은 각각 10kV, 36kJ이다. 접합재는 전기 전도율의 높은 Al 1070 파이프를 사용하였으며 모재는 기존 스틸 요크재인 SM45C 환봉을 사용하였다. 기보고된 연구를 통하여 코일과 접합재 사이의 간격이 좁을수록 높은 전자기력이 접합재에 작용하는 것을 확인하였으나 코일내 접합재와 모재 삽입 편의를 위하여 1mm로 설정하였다. 접합부의 품질 평가를 위하여 수압시험을 실시하였으며, 시험 후 접합부 단면을 주사전자현미경(SEM)을 이용하여 관찰하였다.