• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.58 no.1
• /
• pp.8-14
• /
• 2013

The newly developed fertilizer is the slow-releasing fertilizer which can be used as a basal fertilizer without no additional fertilization at tillering stage. It has 30-4-6% of $N-P_2O_5-K_2O$ and was coated with mixture of LDPE (Low density polyethylene), EVA (Ethylene vinyl acetate), BDP (Bio degraded polymer), TALC and nonionic surfactant for the controlled release up to 50 days after application. Coating materials were designed to be decomposed naturally. This fertilizer can be applied directly to the seedling tray mechanically just before transplanting, resulting in significant labor saving effect. The developed slow-release fertilizer, which can replace both basal fertilization and top dressing at tillering stage by single application directly to seedling tray, showed the highest release at 14~21 days after transplanting. Considering the plant growth at different growth stages and yield, the optimal application rate of developed slow-release fertilizer was 300 g per rice nursery tray and the yield of rice at this application rate was 5.25 MT/ha. Rice quality in terms of head rice grain ratio, amylose content, whiteness, and taste value decreased as fertilization rate increased from 200 g to 500 g per nursery tray. Fertilization rate based on quantity of fertilizer ingredients (N, P, K) was reduced by 49.3% compared to the standard application rate and there was 49.2% reduction in labor input for fertilization.

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 2001.04b
• /
• pp.100-102
• /
• 2001

본 연구에서는 온실의 난방에 사용되는 열풍식 난방기 등의 배기 연통에 부착하여 배출되는 가스로부터 열을 회수할 수 있는 장치를 개발함에 있어서 연통과 열회수 장치간의 열 교환 성능을 3가지 상이하게 설계된 열 교환 장치(Fig. 1 참조)에 대하여 실험적으로 비교 분석하였다. Fig. 1-(a)는 열 교회수기 개발을 위해 기존에 사용한 장치로서 회수용 공기의 흐름방향이 배기 연통과 직각을 이룬 형식이며, Fig. 1-(b) 및 (c)는 열 회수 성능 개선을 위해 새로 설계된 형식으로서 각각 열 교환 파이프의 배치형식이 상이하나 회수용 공기의 흐름방향이 180도로 굴곡되는 U-자형 흐름이 이루어지도록 하였다. 실험에 사용된 공기 순환 펜의 용량은 AB-형의 경우에는 최대 25㎥/min이고, C-형 및 D-형의 경우는 공히 최대 42㎥/min으로서 송풍전압 조절장치를 이용하여 풍량을 연속적으로 조절할 수 있도록 하였다. U-자형 흐름형식인 C-형 및 D-형의 경우 흐름 방향의 굴곡으로 인한 마찰저항이 있을 것으로 예상은 했으나 당초 예상했던 것에 비해 마찰 저항이 지나치게 큰 것으로 밝혀졌다. 비록 설계된 열교환 튜브의 배열형식별 열 교환기의 외부 모양이 달라 회수기의 표면을 통한 대류 열 교환이 다소 차이를 보일 것으로 예상되지만 본 연구에서는 열 회수장치에 내장된 열 교환 튜브부분만을 통한 열 회수율을 중심으로 형식간의 성능을 비교하였다. 실험을 통하여 측정된 자료중 대표적인 예는 Fig-2와 같으며, 측정자료를 기준으로 분석된 열회수 성능에 대한 설계형식별 비교 결과는 Table-1과 같으며, 분석된 결과를 요약하면 다음과 같다: 1. AB-형 열회수시스템의 경우, 초기 투자비용과 현재의 농용 전력요금 하에서 에너지 절감규모를 비교하면, 대체로 1년을 전후하여 투자에 대한 보상이 충분히 가능할 것으로 판단된다. 2. C-형 및 D-형 열회수시스템의 경우, 열 회수용 공기의 흐름방향이 동일 공간내에서 180도 굴절됨으로서 저항이 크게 발생되어 송풍 펜의 전압 증가에 따른 유속증가가 미미하였으며, 굴절형의 열교환장치는 비록 열교환면적은 직선형과 유사하더라도 송풍 펜의 공기저항이 커져서 결국 열 회수성능이 기대했던 것만큼 크게 개선되지는 못했다. 3. 송풍펜의 용량은 AB-형에 사용된 용량인 25㎥/min 전후가 적절할 것으로 판단되며, 적정 송풍 펜용량 하에서 열 회수성능은 굴절형이 직선형보다 효과적인 것으로 나타났다. 다만, 곡선형은 물론 직선형에서도 열교환 튜브의 배치밀도, 튜브 길이 및 두께 등의 변화에 따른 최적화 연구가 수반되어야 할 것으로 판단된다.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.11 no.3
• /
• pp.29-35
• /
• 2011

This research proposes the suitable method for estimating the future probable rainfall based in 2100 on the observed rainfall data from main climate observation stations in Korea and the rainfall data from the A1B climate change scenario in the Korea Meteorological Administration. For all those, the frequency probable rainfall in 2100 was estimated by the relationship between average values of 24-hours annual maximum rainfalls and related parameters. Three methods to estimate it were introduced; First one is the regressive analysis method by parameters of probable distribution estimated by observed rainfall data. In the second method, parameters of probable distribution were estimated with the observed rainfall data. Also the rainfall data till 2100 were estimated by the A1B scenario of the Korea Meteorological Administration. Last method was that parameters of probable distribution and probable rainfall were estimated by the A1B scenario of the Korea Meteorological Administration. The estimated probable rainfall by the A1B scenario was smaller than the observed rainfall data, so it is required that the estimated probable rainfall was calibrated by the quantile mapping method. After that calibration, estimated probable rainfall data was averagely became approximate 2.3 to 3.0 times. When future probable rainfall was the estimated by only observed rainfall, estimated probable rainfall was overestimated. When future probable rainfall was estimated by the A1B scenario, although it was estimated by similar pattern with observed rainfall data, it frequently does not consider the regional characteristics. Comparing with average increased rate of 24-hours annual maximum rainfall and increased rate of probable rainfall estimated by three methods, optimal method of estimated future probable rainfall would be selected for considering climate change.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.4
• /
• pp.387-394
• /
• 2020

In this research, a physical property test of CLSM, which can safely and effectively utilize a great number of industrial byproducts and waste types, was used to review the applicability of GBFS, FNS, and FGB, as well as their field applicabilities as cavity fillers, and the following conclusions have been reached. first, For CLSM utilizing GBFS, FNS, and FGB, it was revealed that a proper mixing of over 30% of GBFS and FNS or within 5% of FGB is effective in improving the fluidity for field application. second, It was revealed that GF15B5 can suppress bleeding at a similar level as the base, whereas GF30B5 can do so at about 0.17% compared to the base. It was also verified that GF15, GF30, and GF45 can suppress bleeding at about 0.2%, 0.26%, and 0.3%, respectively, compared to the base. third, Both GF15B5 and GF30B5 exceeded 0.4MPa in 7day strength tests to satisfy the field application and, also, the rates of increase of their initial strengths were found to be 323% and 233% higher than the base, respectively. Meanwhile, the 7day strength test of GF, which utilizes GBFS and FNS, also reached over 0.2MPa for field application, and it was revealed that GF15, GF30, and GF45 show 160%, 237%, and 185% higher strength increase rates, respectively, compared to the base.

• Composites Research
• /
• v.35 no.3
• /
• pp.127-133
• /
• 2022

Polypropylene (PP) has been received great attention as a next-generation high-voltage power cable insulation material that can replace cross-linked polyethylene (XLPE). However, the PP cannot be used alone as an insulation material because of its high elastic modulus and vulnerability to impact, and thus is mainly utilized as a form of a copolymer with rubber phases included in the polymerization step. In this paper, a soft PP-based blend was prepared through melt-mixing of impact PP, polyolefin elastomer, and propylene-ethylene random copolymer. The elastic modulus and impact strength of the blend could properly be decreased or increased, respectively, by introducing elastomeric phases. Furthermore, the blends showed a high storage modulus even at a temperature of 100℃ or higher at which the XLPE loses its mechanical properties. In addition, the blend was found to be effective in suppressing the space charge compared to the pristine PP as well as XLPE.

• Journal of the Korea Society for Simulation
• /
• v.32 no.4
• /
• pp.69-76
• /
• 2023

To improve the financial stability of the National Pension, an appropriate target rate of return should be established based on pension liabilities, and asset allocation policies should be formulated accordingly. The purpose of this study is to calculate the target rate of return considering the contributions of subscribers and the pension benefits, and based on this, derive an asset allocation. To do this, we utilized the internal rate of return methodology to calculate the target rate of return for each cohort. And then, we employed a Monte Carlo simulation-based re-sampling mean-variance model to derive asset allocation for each cohort that satisfy the target rate of return while minimizing risks. Our result shows that the target rate of return for each cohort ranged from 6.4% to 6.85%, and it decreased as the generations advanced due to a decrease in the income replacement rate of the National Pension. Consequently, the allocation of risky assets, such as stocks, was relatively reduced in the portfolios of future generations. This study holds significance in that it departs from the macroeconomic-based asset allocation methodology and proposes investments from an asset-liability management perspective, which considers the characteristics of subscribers' liabilities.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.54 no.4
• /
• pp.357-365
• /
• 2009

On the purpose to improve the milling efficiency as well as head-rice percentage after milling, an experiment to improve the removal ability of immature kernels in the immature brown rice separator (IBRS) was performed focused on varietal characteristics. The removal ability of immature grains by the IBRS was absolutely depending on kernel thickness of brown rice. The kernel thickness of the tested rice varieties distributed from 1.79 mm in Nonganbyeo to 2.16 mm in Daeribbyeo 1. Although there were some variation among rice varieties, it was roughly suggested that the suitable sieve-slit widths for good separation of the immature kernels were 1.9 mm for the varieties thicker than 2.08 mm in thickness, 1.8 mm for the varieties with 2.00-2.08 mm thickness, 1.7 mm for the varieties with 1.90-2.00 mm thickness, and 1.60-1.65 mm for the varieties thinner than 1.7 mm. It was found out that the higher the proportions of immature kernels in brown rice, the more conspicuous the improvement of milling efficiency as well as head rice rates by their removals. With increasing the sieve slit-widths beyond an optimum range, the losses of mature grains increased sharply. For effective separation of immature kernels, it was suggested that the optimum sieve-slit width should be set up depending on both of the kernel thickness and the critical loss limit of mature kernel.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.5 no.2
• /
• pp.136-142
• /
• 1985

For better grassland development in the forest, this field experiment was carried out to investigate the effect of thirteen different fertilizer levels of nitrogen(N), phosphorus ($P_2O_5$) and potassium ($K_2O$) on the botanical composition, growth and dry matter yield of grass-clover mixtures grown under trees with 40-50% of shading level. This experiment was arranged as a randomized block design with replications, and performed on the experimental field in the suburban forest of Suweon in 1984. The results obtained are summarized as follows: 1. Plant height and cover degree of grasses found to be high with 28 and 42kg N fertilizer per 10a, while those were the lowest with zero and N-zero fertilizer levels. The degree of bare land after the fourth cut was also high in the low N level. 2. A significant higher degree of leaf green and chlorophyll content of leaf blade was observed in the plot of 28 and 42 kg N per 10a when compared with low N fertilizer plot. However, leaf decay and plant type of grasses tended to be a little poor as the high N was applied. 3. the regrowth plant length and dry weight of grasses after the first cut increased significantly with 28 and 42 kg N fertilizer. However, those showed slightly increased regrowth in the plot of zero and N-zero fertilizer levels. 4. The dry matter yield of grasses was higher with 28 and 42 kg N than that of low N fertilizer level. Higher yields were obtained in the plot of standard ($N-P_2O_5-K_2O$=28-20-24 kg/10a), 50% increase of $N,P_2O_5K_2O$ and N-50% increase, although there were no significant differences among three fertilizer levels. 5. Growth, botanical composition, regrowth and yield of grasses grown under pine trees were significantly influenced by N fertilizer level, regardless of $P_2O_5\;and\;K_2O$. The fertilizer level of $N-P_2O_5-K_2O$ was 28-20-24 kg per 10a for more forage production in the forest. Considering economic yield in this study, however, the optimum fertilizer level of N, $P_2O_5\;and\;K_2O$ was suppose to be 21-28, 10-15, and 12-18kg per 10a, respectively.

• Journal of agricultural medicine and community health
• /
• v.29 no.1
• /
• pp.147-161
• /
• 2004

Objectives: There are many habitual drinking in rural area. So it is the key point of drinking control policy in rural community to understand the drinking behavior in leisure time and to have an appropriate screening method for problem drinking. CAGE and AUDIT are famous screening tools for problem drinking and alcoholics. Even though there are some studies to validate CAGE and AUDIT which translated in Korean, they were not studied with community based population but with hospital based patients. In this study we assessed the usefulness of CAGE and AUDIT for selecting problem drinking in a rural population, and compared problem drinkers with normal group about spending leisure, Methods: The study subjects were 120 residents over 20 years old who lived in 3 districts in Dong-San Myun near Chun-chon city. We made up questionnaire by interview from Feb. 13 to 19, 2004. Results: The mean age of study population was 66.01 .26 years old. Defining the problem drinking as more than 12 score in AUDIT and more than 2 score in CAGE, the proportion of problem drinker was 30.600 and 28.9% respectively. This proportions were higher than those of other national wide studies. There were significant difference in drinking frequency per week and amount per one episode between problem drinker and normal group. Experience about driving, accident, injury, disturbance in working and quarrel after drinking were also significantly different. Problem drinker were more tolerable to the bad social culture about drinking (eg. force to drink, bad drunken habit. overdrinking, drinking relay etc.) than normal group. Watching TV and playing with neighborhood were most frequent method of spending leisure in this study population, normal male group exercised more frequently in leisure time than problem drinker. Conclusions: It may be useful to use CAGE and AUDIT score for screening problem drinking in rural community. Appropriate utilization of leisure time may he important for control of problem drinking in rural area.

• Journal of Bio-Environment Control
• /
• v.21 no.2
• /
• pp.88-94
• /
• 2012

This study was carried out in order to investigate the effect of temperature of treatment and storage on the longevity of 'Unicorn' tomatoes of light red maturity stage during commercial handling conditions encountered while exporting over long distances. Tomato stored at $5^{\circ}C$ and $11^{\circ}C$ temperature with 85% relative humidity by pre-treating handling temperature that was using from field to before shipment as a winter temperature $5^{\circ}C$, spring temperature $11^{\circ}C$ and summer temperature $25^{\circ}C$ for 3 days. On the final storage day, $25^{\circ}C/11^{\circ}C$ (treated/stored) tomatoes showed the highest respiration and ethylene production rate; whereas the lowest respiration and ethylene production rate was found for $5^{\circ}C/5^{\circ}C$ treated and stored tomatoes. Tomatoes treated and stored at $5^{\circ}C/5^{\circ}C$ showed higher marketability, without evidence of fungal rot, decay or spots for 23 days. The fresh weight loss under all treatment conditions increased gradually during $5^{\circ}C$ and $11^{\circ}C$ storage temperatures. The higher firmness and soluble solids were determined from $5^{\circ}C/5^{\circ}C$ and $5^{\circ}C/11^{\circ}C$ treated and stored tomatoes repectively, than from others tomatoes on the final day of storage. In addition, $5^{\circ}C/5^{\circ}C$ tomatoes showed higher vitamin C contents than tomatoes stored at other temperatures, on the final day of storage. As the ripening and storage period progressed, the titratable acidity increased, but declined (P < 0.05) thereafter, due to over ripe tomatoes under all treatment conditions. These results show that $5^{\circ}C/5^{\circ}C$ treated and stored light red maturity stages of 'Unicorn' tomatoes are optimum to export because they show the highest storability and marketability. Moreover, the marketability of light red maturity stage of 'Unicorn' tomato maintained for 2 weeks in $25^{\circ}C/11^{\circ}C$ treated and stored temperature that might be the export temperature from Korea to Japan in summer season. This research result could be useful in helping tomato growers and exporters to get optimum market value by satisfying the buyer and consumer with a fresher product.