• Journal of the Korean Magnetics Society
• /
• v.19 no.3
• /
• pp.81-84
• /
• 2009

We examine the effect of U term (U = 3 eV) describing the Coulomb interactions between electrons on the results of electronic band structure calculations carried out for bcc Fe bulk, monolayer, and chain. We investigated the properties of the three Fe structures by using the all-electron total-energy full-potential linearized augmented plane wave method. The U term was included in the exchange - correlation functionals constructed on the basis of local density approximation (LDA) and general gradient approximation (GGA). We found that in the case of bcc Fe bulk structure inclusion of the U term leads to the overestimated values of magnetic moment on Fe atom. The values of magnetic moment calculated for Fe in monolayer and chain are in accordance with calculations in which the U term was not included. In general, for each system the calculated values of magnetic moment on Fe sites were larger when the U term was incorporated in the energy functional. In Fe bulk, the value of magnetic moment $2.54{\mu}_B$ for LDA+U larger than $2.25{\mu}_B$ for LDA.

• Journal of Chest Surgery
• /
• v.34 no.11
• /
• pp.848-853
• /
• 2001

Background: Sternal infection or dehiscence after cardiac surgery through median sternotomy is rare. If suitable treatment is not performed for the complication, however, the mortality is high. For 12 patients with sternal dehiscence or infection, we performed wide excision of the infected and necrotic tissue and covered with muscle flap(s) to obliterate the mediastinal dead space. Material and method: Sternal infection or dehiscence occurred in 13 of patients who underwent cardiac surgery One patient, who died of cerebral infarction before the sternal complication was treated, was excluded in this study. The sternal wound complication occurred in 6 of patients with valve replacement and 6 of patients with coronary bypass surgery, respectively. Since 1991, 9 patients underwent definite surgical debridement and muscle transposition as soon as fever was controlled with closed irrigation and drainage. The necrotic tissue and bone was widely excised and the sternal dead space was eradicated with the single flap or the combined flaps of right pectoralis flap(turnover flap), left pectoralis flap(turnover flap or rotation-advancement flap), and right rectus muscle flap. Result : There was no mortality in 12 patients with coverage of muscle flap(s) for sternal infection or dehiscence The mean interval between the diagnosis of sternal complication and the myoplasty was 6.6$\pm$3.9 days. In 4 patients, one pectoralis muscle flap was used, and in 8 patients both pectoralis muscle flaps were used. For each 1 patient and 2 patients in each group, right rectus muscle flap was added. For the last 3 patients, a single pectoralis flap was used to eradicate the mediastinal dead space and the longer placement of the mediastinal drain catheter was needed. One patient, who had suffered from necrosis of left pectoralis flap(rotation-advancement flap) with subsequent chest wall abscess after coverage of both pectoralis flaps, was managed with reoperation using right rectum flap. Conclusion : Sternal dehiscence or infection after cardiac operation can be readily managed with wide excision of necrotic infected tissue(including bone) and muscle flap coverage after short-term irrigation of sternal wound. The sternal(mediastinal) dead space may be completely eradicated with right pectoralis major muscle flap alone.

• International Journal of Highway Engineering
• /
• v.13 no.3
• /
• pp.39-49
• /
• 2011

The porous pavement system is widely considered very effective in urban street because of its various benefits on safety and environment, but the pavement thickness design system has not been established yet. In porous pavement system. rainwater penetrates to the subgrade through porous pavements layers. Porous pavements are expected to reduce or alleviate the problems caused by impermeable pavement layer such as flood damage due to heavy rain in the city, drainage load, disorder in ecosystem, and heat island. However, its structural design methods in traffic roads has not been made mainly because of not being able to consider adequately the effect of rainwater on subgrade strength. In this study, structural design method of porous pavements is suggested after considering the subgrade weakness due to rainwater and numerical mechanical analysis. It is noted that elastic modulus of subgrade is reduced by 20% as subgrade moisture content is increased by 2% at optimum moisture content in the literature review. As a result of both finite element analysis and strength loss of subgrade by the existing design method, it is necessary to increase subbase thickness about 30cm in porous pavements compared with the existing traffic road pavement system. It is similar to premium thickness of structural design of porous pavements in Japan.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.132-132
• /
• 2016

기계 가공품의 정밀화, 경량화 요구로 난색재로 분류되는 비철분야 및 복합재 가공용 공구개발에 대한 수요가 급증하고 있으나, 기존 난삭재 가공 시 절삭공구의 마모가 빠르고, 상대재의 융착 불량 등이 공구 수명 감소의 주요 영향으로 보고된다. 상기문제를 해결하기 위해 절삭가공 공정 중 과다한 절삭유의 사용에 따른 가공비용, 에너지소모 증가, 환경오염 등으로 절삭유의 최소화 또는 절삭유를 사용하지 않는 표면처리기술등의 친환경 가공기술의 개발이 필요하다. 내융착 및 내마모 특성 향상을 위한 표면코팅 방법으로 수소가 포함되지 않은 고경도 비정질 카본 (ta-C)이 있으나, ta-C 코팅 막은 경도 30 - 80 GPa, 잔류응력 3 - 10 GPa 범위로 일반 경질 코팅 막 (AlTiN, TiSiCrN : 평균 3 GPa)에 비해 높고 산업적 활용이 가능한 0.5 - 1.5 um 두께 수준의 후막화가 힘들어 매우 우수한 절삭공구용 코팅 막 특성에도 불구하고 적용사례가 매우 적다. 따라서, 본 연구에서는 아크플라즈마 방식 (Filtered Cathode Vacuum Arc Plasma, FCVA)을 활용한 고경도/무수소 카본 코팅 막을 후막형태로 증착하여 비철금속가공용 절삭 공구류의 수명향상 기법을 제시하고자 한다. ta-C 코팅 막의 기초 공정개발 단계에서는 바이어스 전압, 공정시간을 달리하여 ta-C 코팅 막의 기계적 물성(경도: $50{\pm}3GPa$, 잔류응력: $6{\pm}1GPa$, 밀착력: 30N 이상 및 트라이볼로지 특성: 마찰계수 0.1 이하, 마멸량: $1.85{\times}10-14mm^3$)을 확보하여 절삭공구로의 공정실용화 적용검토를 실시하였다. ta-C 코팅 막은 (1) WC 공구 및 기존 상용품인 (2) TiAlN/TiN/WC 구조에 대해 증착을 실시하였으며 코팅 막의 두께 변화에 따른 실제 절삭환경에서의 내수명 관측을 진행하였다. 시험결과, ta-C/WC의 단일막 구조인 절삭공구의 경우, 실제 절삭환경에서 쉽게 박리가 발생하여 코팅 막으로서의 효과를 나타내지 못하였다. 이는, 기초 공정개발 단계에서의 밀착력 기준이 실제 환경과 부합하지 않는 것을 의미하며 추후 공정개선을 통해 극복하고자 한다. 반면에, 상용품인 (2) TiAlN/TiN/WC 구조의 절삭공구 대비 ta-C/TiAlN/TiN/WC 구조에서 내수명 증가는 약 2.5배 (기존 300회, 코팅 후 800회)로 증가하였으며 ta-C 코팅 막의 두께가 $0.6-0.8{\mu}m$일 때 최대치를 취한 후 감소하였다. 이를 통해, 절삭공구로의 ta-C 코팅 막 효과는 최외각 층의 두께 범위와 모재 강도보강을 할 수 있는 적절한 중간층 막 (TiN/TiAlN 층)이 혼합되어 나타난 것으로 사료되며 현재 산업계로의 적용을 위한 대량생산용 코팅장비의 개발 및 비용절감을 위한 공정개발이 진행 중이다.

• Journal of Korean Society of Steel Construction
• /
• v.15 no.6 s.67
• /
• pp.683-691
• /
• 2003

Recently, the steel has been increaseingly used as an integrated part of high-rise buildings, which often composed of steel structures, steel reinforced concrete structures and composite structures. The steel base is designed to transfer the stresses induced from steel column to the reinforced concrete footing through the base plate. However, in the design of steel structures and steel reinforced concrete structure, it is generally difficult to evaluate the bearing strength of the steel base subjected to large axial force. Furthermore, the material used in steel base is quite different from those used in other connections and a load transferring mechanism of steel base is very complicated in nature. Therefore, a special attention must be placed in design and construction of steel base. In generally, the bearing strength test and research of the steel base subjected to concentrated load are carried out. But, in the design of the structures, uniaxial eccentric load is loaded to the steel base of the steel structures. In this research, the bearing strength and the me of failure considering eccentric loads and eccentric length, were experimented when eccentric load is loaded to the steel base of steel structures. Based on the test results, a basic design reference is suggested for a reasonable design of steel structures, steel reinforced concrete structures and composite structures.

• Proceedings of the KSCN Conference
• /
• 2003.11a
• /
• pp.1073-1074
• /
• 2003

본 연구는 고학력 중년 여성을 대상으로 취업 여부에 따른 영양섭취 상태의 차이를 분석하여 고학력 중년 여성의 영양 및 건강관리를 위한 대책 마련의 기초자료로 활용하고자 시행되었다. 연구 대상자의 선정은 유의추출 방법으로 전업 여성은 고학력자 비율이 높은 대전시의 일정 지역에 거주하는 기혼여성으로 하였고, 취업여성은 여러 직업의 특성으로 인한 교란(confounding)을 줄이기 위하여 고학력 여성의 비율이 높은 기혼의 교사로 한정하였다. 연령에 의한 교란을 방지하기 위하여 연령대별로 동일 비율로 무작위 추출하여 전업여성 250명, 취업여성 236명을 대상으로, 24시간 회상법을 이용하여 조사 전일 하루동안의 식이 섭취 내용을 개별 면담으로 조사하였다. 1일 영양소 섭취 조사 결과 취업여성은 전업여성에 비해 인, 비타민 B$_1$, B$_2$를, 전업여성은 취업여성에 비해 지방 및 동물성 지방, 나트륨, 비타민 C, 엽산을 많이 섭취하고 있었다. P/M/S비는 전업여성 1/1.19/1.05, 취업여성 l/l.05/0.87로 나타나 취업여성이 전업여성에 비해서, 그리고 한국인 영양권장량의 기준(1/1/1)에 비해서 포화지방의 비가 낮았다. 또한 지방 에너지 구성비도 전업여성(24.38%)이 취업여성(23.29%)에 비해 높았고, 총 열량에 대한 동물성 지방의 섭취비율이 전업여성 12.44%, 취업여성 11.46%으로 나타나 전업여성이 취업여성에 비해 동물성 지방, 포화지방비, 지방에너지 구성비가 모두 높았다. 영양권장량에 대한 영양소 섭취 백분율에서 전업여성과 취업여성 모두 칼슘과 아연을 권장량에 비해 낮게 섭취하고 있었고, 질적 영양지수(INQ)도 두 군 모두에서 칼슘이 가장 낮게 나타났다. 인의 영양밀도(Nutrient Density)가 취업주부에서 높았던 점 외에는 영양밀도와 영양소 적정섭취비(NAR) 모두에서 비타민 B$_1$, B$_2$가 전업여성에 비해 취업여성이, 비타민 C가 취업여성에 비해 전업여성이 더 높았다. 한편 두 군 모두 INQ가 가장 높은 영양소는 인이었고, INQ가 가장 낮은 영양소는 칼슘으로 나타났으며, INQ가 1 미만인 영양소는 칼슘과 함께 철분으로 나타났다. 이는 1998년도 국민건강영양조사 결과에서 45세 이상 여성의 경우 관절염, 요통.좌골통, 디스크 등 근골격계질환 유병률이 남자보다 3배정도 높게 나타난 결과에 비추어볼 때 이들 관련 영양소에 대한 섭취 방안 지도의 필요성을 제시하고 있다. 결론적으로 고학력 중년 여성중 전업여성에 대해서는 지방 특히 동물성 지방 식품 섭취에 대한 적절한 영양교육과 식사관리 지도가 요구된다 하겠다. 또한 고학력 중년 여성은 취업 여부에 관계없이 칼슘과 철분이 많이 함유된 식품으로 식사량을 증가시켜 주는 영양 지도 및 영양 보강 대책이 요구되며, 칼슘과 인의 적정섭취비가 되도록 인의 섭취를 낮추는 식생활 지도가 필요하다.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.23 no.4
• /
• pp.253-263
• /
• 2021

Concrete structures are damaged by aging and external environmental factors. This type of damage is to appear in the form of cracks, to proceed in the form of spalling. Such concrete damage can act as the main cause of reducing the original design bearing capacity of the structure, and negatively affect the stability of the structure. If such damage continues, it may lead to a safety accident in the future, thus proper repair and reinforcement are required. To this end, an accurate and objective condition inspection of the structure must be performed, and for this inspection, a sensor technology capable of detecting damage area is required. For this reason, we propose a deep learning-based image processing algorithm that can detect spalling. To develop this, 298 spalling images were obtained, of which 253 images were used for training, and the remaining 45 images were used for testing. In addition, an improved loss function and data augmentation technique were applied to improve the detection performance. As a result, the detection performance of concrete spalling showed a mean intersection over union of 80.19%. In conclusion, we developed an algorithm to detect concrete spalling through a deep learning-based image processing technique, with an improved loss function and data augmentation technique. This technology is expected to be utilized for accurate inspection and diagnosis of structures in the future.

• Journal of Digital Convergence
• /
• v.17 no.9
• /
• pp.301-310
• /
• 2019

This study aims to examine eligibilities, services and delivery of services for the current end-of-life care and analyze the quality control of services for end-of-life care. We analyzed the literature and laws on end-of-life systems in Korean and the United States. Current end-of-life care, hospice and palliative care in Korea is being provided mainly in hospital setting. Quality control for the services focuses on setting the criteria for structures in hospitals (i.e. staffing, facilities and equipment). Whereas American end-of-life care system has much broader eligibility for service beneficiaries and provides care mostly at home. Also quality control for services includes process (delivering service) and outcomes, such as monitoring performance indicators and consumer's satisfaction. This is linked to annual payment. The comparative analysis findings contributed to give the next direction of current Korean end-of-life care system. It is nessary to establish the better and extensive end-of-life care system in Korea in considering other countries' end-of-life care systems based on more future research.

• Journal of the Society of Disaster Information
• /
• v.17 no.3
• /
• pp.454-464
• /
• 2021

Purpose: There is a need to construct an evacuation passageway for the 2-Arch tunnel, which has been constructed and is in operation. Therefore, it aims to analyze tunnel and center wall behaviour and stability due to excavation of the center wall. Method: We describe the theoretical background of 2-Arch tunnel and evacuation passageway, and focused on analyzing the behaviour of tunnel and wall using 3-dimensional finite element analysis. Parametric analysis according to rock rating was performed with various ground conditions, and the displacement and stress of the center wall were intensively analyzed. Result: With the center wall excavation, the largest amount of settlement was shown in the center of the opening, and the stress was greatest during the first excavation. In addition, it was shown that stress concentration occurred at the top of both openings, and stability reviews considering the concept of allowable stress showed that it exceeded the allowable stress. Conclusion: Although the displacement of the tunnel has secured stability within the allowable standard, the generated stress is found to exceed the allowable standard, so it is necessary to prevent sudden stress release by applying appropriate reinforcement methods during construction.

• Journal of Internet Computing and Services
• /
• v.16 no.2
• /
• pp.57-66
• /
• 2015

Considerable research efforts are being directed towards analyzing unstructured data such as text files and log files using commercial and noncommercial analytical tools. In particular, researchers are trying to extract meaningful knowledge through text mining in not only business but also many other areas such as politics, economics, and cultural studies. For instance, several studies have examined national pending issues by analyzing large volumes of text on various social issues. However, it is difficult to provide successful information services that can identify R&D documents on specific national pending issues. While users may specify certain keywords relating to national pending issues, they usually fail to retrieve appropriate R&D information primarily due to discrepancies between these terms and the corresponding terms actually used in the R&D documents. Thus, we need an intermediate logic to overcome these discrepancies, also to identify and package appropriate R&D information on specific national pending issues. To address this requirement, three methodologies are proposed in this study-a hybrid methodology for extracting and integrating keywords pertaining to national pending issues, a methodology for packaging R&D information that corresponds to national pending issues, and a methodology for constructing an associative issue network based on relevant R&D information. Data analysis techniques such as text mining, social network analysis, and association rules mining are utilized for establishing these methodologies. As the experiment result, the keyword enhancement rate by the proposed integration methodology reveals to be about 42.8%. For the second objective, three key analyses were conducted and a number of association rules between national pending issue keywords and R&D keywords were derived. The experiment regarding to the third objective, which is issue clustering based on R&D keywords is still in progress and expected to give tangible results in the future.