• Proceedings of the KIEE Conference
• /
• 1992.07a
• /
• pp.299-301
• /
• 1992

The adaptive active noise control algorithm for duct noise attenuation is considered. A new algorithm to estimate the secondary path transfer function using multiple models is presented. The computational burden of the proposed algorithm is much smaller than the existing methods, so it could be applied to the multi-channel cases. Computer simulations were done to show the effectiveness of the proposed algorithm in a duct case.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.1
• /
• pp.154-160
• /
• 2004

In this paper, implementation of active noise curtains using multiple channel adaptive filters is presented. The same numbers of single channel LMS algorithms as control loudspeakers is used instead of a multi-channel LMS algorithm to reduce the computational burden of adaptive filter algorithms. In general, a multi-channel LMS algorithm is usually used in active noise control system. but this algorithm has much more computational complexity. The single channel control techniques have less amount of DSP calculation, compared to multiple channel control techniques. A stabilizing procedure for adaptive IIR filters is also proposed to improve the stability of recursive LMS algorithms. Both experimental results of two control techniques using TMS320VC33 digital signal processor show the similar noise reduction, but the single channel control techniques are more efficient in practical active noise curtain applications

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.6
• /
• pp.147-153
• /
• 2003

In this paper, implementation of active noise barriers(ANB) to attenuate exterior noise which is propagated through open windows is presented. The leaky multiple channel LMS algorithms are used for adaptive filters tc improve the convergence property, and a new type of the active noise barrier is proposed. The attenuation effects of conventional active noise control(ANC) systems using leaky multiple channel LMS algorithms and the proposed system are compared by experiments using a TMS320C33 digital signal processor. Noise attenuation levels at the points of error microphones are similar for both systems, but average noise attenuation effects of the proposed system for an entire space of an experimental enclosure are much better than conventional ANC systems.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.04a
• /
• pp.178-183
• /
• 1995

본 연구에서는 플랜트 잡음이 강한 음향 환경에서 기존의 인버스 필터링 방법에 적용 선형 증진기를 부착하여 부가경로 전달함수의 온라인 모델링과 주소음원에 대한 제어 시뮬레이션을 수행하여 다음과 같은 결과를 얻었다. 첫째로, 신호대 잡음비가 낮은 음향 환경에서 적응 선형 증진기를 이용하여 플랜트 잡음을 제거함으로써 부가경로 전달함수의 온라인 모델링을 수행할 수 있었다. 둘째로, 실제의 부가경로 전달함수가 변한 상태에서 제안된 알고리즘을 이용하여 제어 시뮬레이션을 수행하여 주소음원에 대한 제어와 정확하게 새로운 부가경로 전달함수를 예측할 수 있었다. 향후 본 연구에서 제안된 알고리즘을 실시간 어셈블리화하여 능동 소음 제어 실험한 결과를 발표할 예정이다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2016.11a
• /
• pp.163-164
• /
• 2016

이전까지 많은 연구자들은 적응 신호처리(Adaptive Signal Process)를 이용한 잡음 제거 방법을 연구해 왔다. 그러나, 최근 발전하고 있는 멀티콥터는 프로펠러 모터의 RPM(Revolution Per Minute)이 실시간으로 변하기 때문에 적응 신호처리를 이용하여도 깔끔한 결과를 얻어 내기가 어렵다는 한계가 존재한다. 또한, 특정 주파수를 기준으로 형성되는 고조파(Harmonics)는 적응 알고리즘인 (N)LMS 를 이용한 예측에서 오차를 발생시키는 문제를 발생시킨다. 따라서, 본 논문에서는 멀티콥터를 이용한 음향 취득에 대한 소음 저감 방법으로 회전 속도계(Tachometer), 콤 필터(Comb Filter), NLMS 알고리즘(Normalized Least Mean Square Algorithm)을 이용한 방법을 제안한다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.14 no.1
• /
• pp.94-101
• /
• 2000

In this paper, a multi-channel active noise control(ANC) system using subband hybrid control techniques is proposed. Subband techniques could reduce computational burden and improve the performance of ANC systems by dividing several frequency subband and adjusting adaptive filter coefficients. So it can effectively cancel noises at wanted frequency range and use lower order adaptive filter than the existing algorithms. The adjoint LMS algorithm, which prefilter the error signals instead of the divided reference signals in frequency band, is also used for adaptive filter algorithms to reduce the computational burden of the subband adaptive systems. To improve performance of the ANC system, a weighted hybrid control technique, which has weightily properties of feedforward control systems and feedback control systems, is applied. This algorithm shows higher stability and good noise attenuation property in broad band ANC systems. Computer simulations were performed to show the effectiveness of the proposed algorithm.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.433-438
• /
• 1999

This paper describes Active Noise Cancellation/Control(ANC) method that removes the information of the unnecessary noise and doesn't remove the informations of the necessary noise(warning sound, operating sound etc.) for the induced noise of the mechanical system. In this paper, the noise source Is axial fan, and the Feedback Active Noise control method that can effectively control BPF generated from the axial fan is used, and the Filtered-X LMS algorithm for adaptive algorithms is used. The experiments are executed for two case(propagating noise in the duct, emission noise for exterior free field). The part to be removed is BPF noise, and the band-pass filter not to effect to the other frequencies is used. Also, to investigate the effect of the noise reduction for human, we are compared with the results that are controlled for using Loudness before and after. As a results, we are certified that the BPF is decreased only and frequencies outside of BPF are not affected, and we acquire the reduction effects of 6.7 dB Loudness Level, then the frequency to be removed is controlled. Therefore, we can be certified that sound pressure as well as loudness can be effectively decreased for human sound quality

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 1992.11a
• /
• pp.56-59
• /
• 1992

Adaptive active attenuation of noise in a duct is considered. A duct is modelled when the acoustic feedback exists. The secondary path transfer function is estimated using multiple model approaches. An IIR structure is assumed for the control filter, and the recursive least mean squares algorithm is used to adjust the filter coefficients.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.9
• /
• pp.1699-1701
• /
• 2010

The Active Noise Cancelling(ANC) headphone is now becoming commercially available. But it reduces not only noise but also information signals such as speech or some signals including audible information in particular situation. In this paper, we propose an ANC headphone using adaptive beam-forming techniques which cancels signals except the headphone wearer's look direction signal. It enables workers working in noisy condition to talk with their coworkers. Computer simulation is performed to show the effectiveness of a proposed algorithm.

• Journal of KSNVE
• /
• v.5 no.4
• /
• pp.453-460
• /
• 1995

본 논문에서는 정현파 소음을 제어하기 위한 filtered-x LMS에 바탕을 둔 새로운 적응 알고리듬을 제안하였다. 이러한 알고리듬은 두개의 연속적인 계수조정 식으로, 제어기의 계수를 조정한다. 서로 독립인 각 주파수별로 처리하기 때문에 빠른 수렴을 얻을 수 있다. 두번째식은 이차경로로 인한 위상지연을 추정한다. 정현 파 신호 주파수보다 4배 이상 빠른 표본화 주파수를 선택하여 추정된 위상지연 추정 값은 $2{\pi}f_0$만큼 오차를 나타내며, 이 값은 $\pi$2보다 작다. 정현파 신호의 주파수를 알면 이러한 오차는 $2{\pi}f_0$를 더함으로써 제거할 수 있다. 이러한 방법은 위상지연이 $\pi$2보다 큰 경우 수렴속도를 증가시킨다는 사실을 실험을 통하 여 알 수 있다. 추정된 위상지연은 제어기 계수값을 조정하는데 필요한 필터링된 참조신호를 발생시키믄데 사용된다. 참조신호의 위상지연이 각 주파수 성분별로 수행 되기 때문에, 콘볼루션 연산이 생략되어 계산량을 줄일 수 있다. 또한 연속적으로 위상지연을 추정하기 때문에 시변 상황에 적용이 가능하다. 조정식의 수렴조건을 유도하였다. 제안된 알고리듬은 제어기 계수를 추정하는데 바이어스가 없으며, 위상 지연추정을 위한 수렴상수의 최대허용치는 제어기계수에 대한 수렴상수에 반비례함을 이론적으로 분석을 통해 알 수 있다. 모의실험을 통하여 제안된 알고리듬이 filtered-x LMS 알고리듬에 바탕을 둔 다른 알고리듬보다 환경변화에 우수한 성능을 보임을 알 수 있다.