• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.6
• /
• pp.970-976
• /
• 2011

Strip tiller equipment was developed to reduce soil erosion in the slope land for highland agricultural area. The equipment consisted of 4 rows strip tillage device and fertilizer applicator. The field was tilled in 10 cm width and in 10 cm depth by the equipment, of which tilled surface was 16.7% of full-width tillage. The working time and fuel consumption of the equipment were $3.8hours\;ha^{-1}$ and $24.4L\;ha^{-1}$ respectively, which were 59% and 74% less than those of the conventional tillage. Fertilizer efficiency of the equipment in cultivation of Chinese cabbage was 1.7, 1.6 and 1.5 times higher in nitrate, phosphorous and potassium respectively, than conventional tillage. When the equipment was used after covering of rye residue, the quantity of runoff was 49~67% lower than the conventional tillage. And the quantity of soil loss were 1.3 and $0.2Mg\;ha^{-1}$ at right after and 30 days after planting of Chinese cabbage respectively, while 11.5 and $4.1Mg\;ha^{-1}$ in conventional tillage. In conclusion, the strip tillage equipment developed in this study can be applicable to slope land, so that soil loss of 90% can be reduced.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.6
• /
• pp.858-863
• /
• 2010

The blueberry farming requires the soil condition of well-drainage, pH of 4.5 to 5.2, and high in organic matters for stable growth and development. Most of soil type of cultivated land in Korea, however, belongs to alkaline soils with low organic matter content and poor drainage. Therefore, the blueberry farmers use peat moss heavily to improve the soil condition, but the guideline on the effective and economic ratio of peat moss is not established yet. This study was performed to determine the cost effective peat moss ratio for amending soils, and to investigate the feasibility of using sawdust and coco peat as soil amendments. Peat moss, coco peat and sawdust are mixed with soil at the ratio of 0, 12.5, 50 and 100% (v/v). Among 3 organic materials with various mixture ratios, the pH of soil was the lowest in 100% peat moss and sawdust mixtures (pH 3.67 and pH 3.73, respectively), followed by pH 5.30 at 50% peat moss. The soil organic matter content are directly proportional to the mixture ratios in all three organic materials and the same trend was observed in the variation of content of exchangeable potassium in the coco peat treatments. On the contrary, the content of available phosphate, exchangeable calcium and magnesium decreased with increasing the ratio of organic materials. The nitrogen content in the leaves decreased as increasing the ratio of peat moss and coco peat in soil, but not of sawdust. The content of phosphate decreased but potassium increased as the ratio of sawdust and coco peat increased. There was no clear difference in the contents of magnesium and calcium among 3 organic materials. The plant height, stem diameter and dry weight of blueberry plants were the highest in 50 % peat moss, followed by 12.5% peat moss and 12.5% coco peat. The plants in 100% peat moss showed very poor growth. It can be concluded that peatmoss, when applied and managed appropriately, will be a good material for improving soil condition as well as securing desirable growth for blueberry. Upon coupling economic aspect, the optimum mixing ratio of peatmoss for blueberry farming is approximately 25-50%.

• Journal of Chitin and Chitosan
• /
• v.22 no.2
• /
• pp.110-117
• /
• 2017

This study was conducted to examine the physicochemical properties and hot air-dried and spray-dried powders process of sweet potato and steamed sweet potato. The moisture and the total starch contents were 1.66~2.19% and 52.65~57.42%, respectively. The total starch contents increased during process steaming. The water absorption index of the spray-dried powders (0.97 and 2.03) was lower than that of the hot air-dried powders (2.12 and 4.71), and the water solubility index of the spray-dried powders (83.83 and 86.95%) was higher than that of the hot air-dried powders (68.40 and 81.21%). The particle size and outer topology of the spray-dried powders were 46.18 and $65.53{\mu}m$, and its shape was generally globular. In the DSC analysis of this study, the $T_o$ of the spray-dried powders (64.40 and $67.80^{\circ}C$), $T_p$ of the spray-dried powders (74.40 and $78.20^{\circ}C$), and $T_c$ of the spray-dried powders (81.10 and $81.60^{\circ}C$) was higher than that of the hot air-dried powders. The solubility contents of the spray-dried powders (68.21 and 80.73%) was lower than that of the hot air-dried powders, and the swelling power contents of the spray-dried powders (14.79 and 15.35%) was higher than that of the hot air-dried powders. The amylose contents of spray-dried powders (11.67 and 12.51%) was lower than that of the hot air-dried powders. The soluble dietary fiber contents of spray-dried powders (1.34 and 2.02%) was higher than that of the hot air-dried powders.

• Journal of Food Hygiene and Safety
• /
• v.36 no.5
• /
• pp.447-453
• /
• 2021

In this study, the effectiveness of physical control technology, a combined light sterilization (LED, UV) and hot water treatment in reducing Aspergillus ochraceus for food production environment was investigated. In brief, 1 mL aliquot of A. ochraceus spore suspension (10^7-8 spore/mL) was inoculated onto stainless steel chips, which was then dried at 37℃, and each was subjected to different physical treatment. Treatments were performed for 0.5, 1, 2, 5, 8, and 11 hours to reduce the strains using a light-emitting diode, but no significant difference was confirmed among the treatments. However, a significant reduction was observed on the chips treated with UV-C exposure and hot water immersion. After being treated solely with 360 kJ/m² of UV-C on stainless steel chip, the fungi were significantly reduced to 1.27 log CFU/cm². Concerning the hot water treatment, the initial inoculum amount of 6.49 log CFU/cm² was entirely killed by immersion in 83℃ water for 5 minutes. Maintaining a high temperature for 5 minutes at the site is difficult. Thus, considering economic feasibility and usability, we attempted to confirm the appropriate A. ochraceus reduction conditions by combining a relatively low temperature of 60℃ and UV rays. With the combined treatments, even in lukewarm water, A. ochraceus decreased significantly through the increases in the immersion time and the amount of UV-C irradiation, and the yield was below the detection limit. Based on these results, if work tools are immersed in 60℃ lukewarm water for 3 minutes and then placed in a UV sterilization device for more than 10 minutes, the possibility of A. ochraceus cross-contamination during work is expected to be reduced.

• Korean Journal of Remote Sensing
• /
• v.37 no.5_2
• /
• pp.1295-1305
• /
• 2021

Satellite-derived ocean color products are required to effectively monitor clear open ocean and coastal water regions for various research fields. For this purpose, accurate correction of atmospheric effect is essential. Currently, the Geostationary Ocean Color Imager (GOCI)-II ground segment uses the reanalysis of meteorological fields such as European Centre for Medium-Range Weather Forecasts (ECMWF) or National Centers for Environmental Prediction (NCEP) to correct gas absorption by water vapor and ozone. In this process, uncertainties may occur due to the low spatiotemporal resolution of the meteorological data. In this study, we develop water vapor absorption correction model for the GK-2 combined GOCI-II atmospheric correction using Advanced Meteorological Imager (AMI) total precipitable water (TPW) information through radiative transfer model simulations. Also, we investigate the impact of the developed model on GOCI products. Overall, the errors with and without water vapor absorption correction in the top-of-atmosphere (TOA) reflectance at 620 nm and 680 nm are only 1.3% and 0.27%, indicating that there is no significant effect by the water vapor absorption model. However, the GK-2A combined water vapor absorption model has the large impacts at the 709 nm channel, as revealing error of 6 to 15% depending on the solar zenith angle and the TPW. We also found more significant impacts of the GK-2 combined water vapor absorption model on Rayleigh-corrected reflectance at all GOCI-II spectral bands. The errors generated from the TOA reflectance is greatly amplified, showing a large error of 1.46~4.98, 7.53~19.53, 0.25~0.64, 14.74~40.5, 8.2~18.56, 5.7~11.9% for from 620 nm to 865 nm, repectively, depending on the SZA. This study emphasizes the water vapor correction model can affect the accuracy and stability of ocean color products, and implies that the accuracy of GOCI-II ocean color products can be improved through fusion with GK-2A/AMI.

• Korean Journal of Remote Sensing
• /
• v.37 no.6_1
• /
• pp.1739-1756
• /
• 2021

Atmospheric nitrogen dioxide (NO₂) is mainly caused by anthropogenic emissions. It contributes to the formation of secondary pollutants and ozone through chemical reactions, and adversely affects human health. Although ground stations to monitor NO₂ concentrations in real time are operated in Korea, they have a limitation that it is difficult to analyze the spatial distribution of NO₂ concentrations, especially over the areas with no stations. Therefore, this study conducted a comparative experiment of spatial interpolation of NO₂ concentrations based on two linear-regression methods(i.e., multi linear regression (MLR), and regression kriging (RK)), and two machine learning approaches (i.e., random forest (RF), and support vector regression (SVR)) for the year of 2020. Four approaches were compared using leave-one-out-cross validation (LOOCV). The daily LOOCV results showed that MLR, RK, and SVR produced the average daily index of agreement (IOA) of 0.57, which was higher than that of RF (0.50). The average daily normalized root mean square error of RK was 0.9483%, which was slightly lower than those of the other models. MLR, RK and SVR showed similar seasonal distribution patterns, and the dynamic range of the resultant NO₂ concentrations from these three models was similar while that from RF was relatively small. The multivariate linear regression approaches are expected to be a promising method for spatial interpolation of ground-level NO₂ concentrations and other parameters in urban areas.

• Journal of the Korean earth science society
• /
• v.42 no.3
• /
• pp.311-324
• /
• 2021

Recently, ten geosites have been considered in Hwaseong for endorsement as national geoparks, including the Jebudo, Gojeongri Dinosaur Egg Fossils, and Ueumdo geosites. The Jebudo geosite in the southern part of the Seoul metropolitan area has great potential for development as a new geoscience educational site because it has geological, geographical (landscape), and ecological significance. In this study, we described the geological characteristics through field surveys in the Jebudo geosite. We evaluated its potential as a geo-education site based on comparative analysis with other geosites in Hwaseong Geopark. In addition, we reviewed the practical effect of field education at geosites on the essential concepts and critical competence-oriented education emphasized in the current 2015 revised science curriculum. The Jebudo Geosite is geologically diverse, with various metamorphic rocks belonging to the Precambrian Seosan Group, such as quartzite, schist, and phyllite. Various geological structures, such as clastic dikes, faults, joints, foliation, and schistosity have also been recorded. Moreover, coastal geological features have been observed, including depositional landforms (gravel and sand beaches, dunes, and mudflats), sedimentary structures (ripples), erosional landforms (sea cliffs, sea caves, and sea stacks), and sea parting. The Jebudo geosite has considerable value as a new geo-education site with geological and geomorphological distinction from the Gojeongri Dinosaur Egg Fossils and Ueumdo geosites. The Jebudo geosite also has opportunities for geo-education and geo-tourism, such as mudflat experiences and infrastructures, such as coastal trails and viewing points. This geosite can help develop diverse geo-education programs that improve key competencies in the science curriculum, such as critical thinking, inquiry, and problem-solving. Furthermore, by conducting optimized geo-education focused on the characteristics of each geosite, the following can be established: (1) the expansion of learning space from school to geopark, (2) the improvement of understanding of specific content elements and linkage between essential concepts, and (3) the extension of the education scope throughout the earth system. There will be positive impacts on communication, participation, and lifelong learning skills through geopark education.

• Journal of vocational education research
• /
• v.36 no.2
• /
• pp.95-121
• /
• 2017

The vocational competency development training teacher must complete the training course for the training of vocational competency development training instructor and get the qualification of the vocational competency development training teacher from the Ministry of Employment & Labor with the criteria set by the Presidential Decree. Therefore, it can be said that H_university 's educational performance, which is the only vocational competency development training teacher in Korea and that plays a role of mass production in the labor market, has a great influence on vocational competency development training. The purpose of this study is to identify the problems through the analysis of actual condition of vocational competency development training education based on CIPP model, Furthermore, it was aimed to suggest improvement plan of qualification training education. In order to accomplish the purpose of the research, the present situation of the training course for the vocational competency development training teacher training students was grasped. And We conducted a survey to draw out the improvement plan and utilized the results of 173 copies. We conducted interviews by selecting eight subjects for in-depth analysis and Understand the details of the results of the surveys conducted. As a result of the study, positive responses were obtained from the educational objectives and educational resources in the context factors. On the other hand, there were negative opinions about the curriculum reflecting the learner and social needs. In the input factors, positive opinions were derived from the educational objectives and training requirements. However, there were many negative opinions about the achievement of the learner's educational goals. In addition, there were many negative opinions of online contents education. In the process factors, positive evaluation was high in class related part, learner attendance management, and institutional support. However, negative opinions were drawn on the comprehensive evaluation of qualification training period, and the learner's burden due to lack of learning period appeared to be the main reason. In the factor of calculation, Positive opinions were derived from the applicability of the business curriculum for training courses for training teachers who are in charge of education and training in industry occupations. However, there were negative opinions such as learning time, concentration of learning, and communication of instructors. Based on the results of the study, suggestions for improving the operation of vocational competency training teacher qualification training are as follows. First, it is necessary to flexibly manage the training schedule for the weekly training course for vocational competency development training teachers. Second, it is necessary to seek to improve the online education curriculum centered on consumers. Third, it is necessary to seek access to qualification training for local residents. Fourth, pre - education support for qualified applicants is required. Finally, follow-up care of qualified trainees is necessary.

• The Korean Journal of Archival Studies
• /
• no.16
• /
• pp.39-96
• /
• 2007

Traditionally, the concept of transfer is that physical records such as paper documents, videos, photos are made a delivery to Archives or Records centers on the basis of transfer guidelines. But, with the automation of records management environment and spreading new records creation and management applications, we can create records and manage them in the cyberspace. In these reasons, the existing transfer system is that we move filed records to Archives or Records centers by paper boxes, needs to be changed. Under the needing conditions of a new transfer paradigm, the fact that the revision of Records Act that include some provisions about electronic records management and transfer, is desirable and proper. Nevertheless, the electronic transfer provisions are too conceptional to apply records management practice, so we have to develop detailed methods and processes. In this context, this paper suggest that a electronic records transfer process model on the basis of international standard and foreign countries' cases. Doing transfer records is one of the records management courses to use valuable records in the future. So, both producer and archive have to transfer records itself and context information to long-term preservation repository according to the transfer guidelines. In the long run, transfer comes to be the conclusion that records are moved to archive by a formal transfer process with taking a proper records protection steps. To accomplish these purposes, I analyzed the 'OAIS Reference Model' and 'Producer-Archive Interface Methodology Abstract Standard-CCSDS Blue Book' which is made by CCSDS(Consultative committee for Space Data Systems). but from both the words of 'Reference Model' and 'Standard', we can understand that these standard are not suitable for applying business practice directly. To solve this problem, I also analyzed foreign countries' transfer cases. Through the analysis of theory and case, I suggest that an Electronic Records Transfer Process Model which is consist of five sub-process that are 'Ingest prepare ${\rightarrow}$ Ingest ${\rightarrow}$ Validation ${\rightarrow}$ Preservation ${\rightarrow}$ Archival storage' and each sub-process also have some transfer elements. Especially, to confirm the new process model's feasibility, after classifying two types - one is from Public Records center to Public Archive, the other is from Civil Records center to Public or Civil Archive - of Korean Transfer, I made the new Transfer Model applied to the two types of transfer cases.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.4
• /
• pp.1487-1495
• /
• 2018

In this study, we investigated collagen production and hyaluronic acid production effects for wrinkle improvement test on 50 kinds of land plants and 10 kinds of marine plants native to Jeju Island as a part of developing customized cosmetic materials. Collagen and hyaluronic acid are recognized as major factors affecting skin aging. Cerastium holosteoides var. hallaisanense Mizushima extract ($100{\mu}g/mL$) produced more than 190% of collagen in the extracts of 50 kinds of land plants. Vicia angustifolia var. segetilis K. Koch. extract ($100{\mu}g/mL$) produced more than 160% of collagen. Ftsia japonica Decne. et Planch. extract ($100{\mu}g/mL$), Euonymus japonica Thunb. extract ($100{\mu}g/mL$), Suaeda malacosperma H.Hara extract ($100{\mu}g/mL$), Elaeagnus umbelellata Thunb. extract ($100{\mu}g/mL$), Sedum oryzifolium Makino extract ($100{\mu}g/mL$), Vicia unijuga A. Br. extract ($100{\mu}g/mL$), and Brassica juncea var. integrifolia Sinsk. extract ($100{\mu}g/mL$) showed more than 140% collagen production effect. Among the 10 species of marine plants, Sargassum macrocarpum C. Agardh extract ($50{\mu}g/mL$) produced more than 190% of collagen, and Carpopeltis angusta (Harvey) Okamura extract ($100{\mu}g/mL$), Codiumcoactum Okamura extract ($100{\mu}g/mL$), and Codium tenuifolium S. Shimada, T. Tadano & J. Tanaka extract ($100{\mu}g/mL$) showed more than 140% collagen production. Suaeda malacosperma H.Hara extract ($100{\mu}g/mL$) showed the effect of producing hyaluronic acid more than 140%, and Ftsia japonica Decne. et Planch. extract ($20{\mu}g/mL$) and Wistaria floribunda A.P. DC extract ($100{\mu}g/mL$) showed more than 130% hyalunonic acid production effect. Among the 10 species of marine plants, Peyssonnelia capensis Montagne extract ($100{\mu}g/mL$) was the most effective. Carpopeltis angusta (Harvey) Okamura extract ($100{\mu}g/mL$), Codiumcoactum Okamura extract ($100{\mu}g/mL$), and Codium tenuifolium S. Shimada, T. Tadano & J. Tanaka extract ($100{\mu}g/mL$) showed more than 120% hyalunonic acid production. Jeju resources, which have good collagen and hyaluronic acid production, showed the potential to be applied to solve the skin troubles of customized cosmetics in the future.