• International Journal of Highway Engineering
• /
• v.11 no.4
• /
• pp.69-78
• /
• 2009

Korea has achieved significant economic growth with building the Gyeongbu Expressway. As the number of new road construction projects has decreased, it becomes more important to maintain optimal status of the current road networks. One of the best ways to accomplish it is weight enforcement as active control measure of traffic load. This study is to develop High-speed Weigh-in-motion System in order to enhance efficiency of weight enforcement, and to analyze patterns of overloaded trucks on highways through the system. Furthermore, it is to review possibilities of developing overweight control system with application of the HS-WIM system. The HS-WIM system developed by this study consists of two sets of an axle load sensor, a loop sensor and a wandering sensor on each lane. A wandering sensor detects whether a travelling vehicle is off the lane or not with the function of checking the location of tire imprint. The sensor of the WIM system has better function of classifying types of vehicles than other existing systems by detecting wheel distance and tire type such as single or dual tire. As a result, its measurement errors regarding 12 types of vehicle classification are very low, which is an advantage of the sensor. The verification tests of the system under all conditions showed that the mean measurement errors of axle weight and gross axle weight were within 15 percent and 7 percent respectively. According to the WIM rate standard of the COST-323, the WIM system of this study is ranked at B(10). It means the system is appropriate for the purpose of design, maintenance and valuation of road infrastructure. The WIM system in testing a 5-axle cargo truck, the most frequently overloaded vehicle among 12 types of vehicles, is ranked at A(5) which means the system is available to control overloaded vehicles. In this case, the measurement errors of axle load and gross axle load were within 8 percent and 5 percent respectively. Weight analysis of all types of vehicles on highways showed that the most frequently overloaded vehicles were type 5, 6, 7 and 12 among 12 vehicle types. As a result, it is necessary to use more effective overweight enforcement system for vehicles which are seriously overloaded due to their lift axles. Traffic volume data depending upon vehicle types is basic information for road design and construction, maintenance, analysis of traffic flow, road policies as well as research.

• Journal of Chest Surgery
• /
• v.32 no.3
• /
• pp.215-223
• /
• 1999

Background: The replacement of the narrowed long-segment trachea with various prosthetic materials or tissue grafts remains a difficult and unsolved surgical problem. Homologous cryopreserved tracheal transplantation has been considered to treat the irreversibly-damaged organs, such as in the lung or heart transplantation and also to overcome the limited supply of donor organs. We examined the morphological changes and the immunosuppressive effects of the cryopreserved trachea after the heterotopic transplantation in the rats. Material and Method: Sixty tracheal segments harvested from 30 donor Wistar rats were heterotopically implanted into the peritoneal cavity of 20 recipient Wistar rats and 40 Sprague Dawley rats. The 60 recipient rats were divided into 6 groups(10 rats/ group). In groups I, II, and III, 30 tracheal segments were implanted immediately after the harvesting and in groups IV, V, and VI, the segments were implanted 28 days after the cryopreservation. Groups I and IV were Wistar syngeneic controls. Groups II and V were Sprague Dawley recipients receiving no immunosuppression and Groups III and VI, were Sprague Dawley recipients receiving immunosuppressive agents. At 28 days all rats were sacrificed and the tracheal segments were evaluated grossly and histologically. Result: Immunosuppression of the tracheal segments had a significant influence on the changes of the tracheal lumen and tracheal epithelial cells, irrespective of the cryopreservation of the trachea(p<0.001). In groups III and VI receiving immunosuppressive agents, the tracheal lumen was patent and the normal epithelial cells were observed, however in the other groups not receiving the immunosuppressive agents, there were almost luminal obliteration by the proliferation of the fibrous tissues and a loss of the epithelial cells, the findings were similar to those in the case of obliterative bronchiolitis after a lung and a heart-lung transplantation. Conclusion: With the appropriate immunosuppressive agents, the lumen and the respiratory epithelium of the transplanted tracheal segment were well preserved, even after the cryopreservation of the tracheal segment, which shows the possibility of the long-term preservation and homologous transplantation of the trachea. But fibroproliferative obliteration of the tracheal lumen and the loss of the normal respiratory epithelial cells, characteristic findings of obliterative bronchiolitis, were observed in the groups without the immunosuppression. This experiment using the rat trachea may be useful in studying the pathogenesis, treatment, and prevention of obliterative bronchiolitis after a lung and a heart-lung transplantation.

• Radiation Oncology Journal
• /
• v.22 no.4
• /
• pp.316-324
• /
• 2004

Purpose : In radiotherapy of tumors in liver, enough planning target volume (PTV) margins are necessary to compensate breathing-related movement of tumor volumes. To overcome the problems, this study aims to obtain patients' body movements by using a moving phantom and an ultrasonic sensor, and to develop respiration sating techniques that can adjust patients' beds by using reversed values of the data obtained. Materials and Methods : The phantom made to measure patients' body movements is composed of a microprocessor (BS II, 20 MHz, 8K Byte), a sensor (Ultra-Sonic, range $3\~3$ m), host computer (RS232C) and stepping motor (torque 2.3 Kg) etc., and the program to control and operate it was developed. The program allows the phantom to move within the maximum range of 2 cm, its movements and corrections to take place In order, and x, y and z to move successively. After the moving phantom was adjusted by entering random movement data (three dimensional data form with distance of 2 cm), and the phantom movements were acquired using the ultra sonic sensor, the two data were compared and analyzed. And then, after the movements by respiration were acquired by using guinea pigs, the real-time respiration gating techniques were drawn by operating the phantom with the reversed values of the data. Results : The result of analyzing the acquisition-correction delay time the three types of data values and about each value separately shows that the data values coincided with one another within $1\%$ and that the acquisition-correction delay time was obtained real-time $(2.34{\times}10^{-4}sec)$. Conclusion : This study successfully confirms the clinic application possibility of respiration gating techniques by using a moving phantom and an ultrasonic sensor. With ongoing development of additional analysis system, which can be used in real-time set-up reproducibility analysis, it may be beneficially used in radiotherapy of moving tumors.

• Journal of Veterinary Clinics
• /
• v.24 no.2
• /
• pp.99-103
• /
• 2007

The antibacterial efficacy of 0.1% (w/v) chitosan solution against Staphylococcus intermedius isolated from a dog with superficial pyoderma was evaluated in vitro and in vivo. The exposure time for the 0.1% chitosan solutions at different pH to be able to eliminate the bacterial cells and the effect of pH of the solutions on antibacterial activity was tested at the same time in vitro. The antibacterial activity of chitosan was compared to other antibacterial agents including 2.5% benzoyl peroxide, 0.5% chlorhexidine acetate, 0.1% chitosan solution combined with 2.5% benzoyl peroxide and chitosan combined with 0.5% chlorhexidine using a modified detergent scrub quantitative technique in 10 adult mongrel dogs in vivo. They were able to eliminate a number of bacteria after the exposure time of 10 minutes at varying degrees according to the pH of the solutions. The antibacterial activity of chitosan was inversely affected by pH with higher activity at lower pH value. The 0.1% chitosan solution was also efficacious against Staphylococcus intermedius in vivo. The combinations of chitosan with benzoyl peroxide and with chlorhexidine were shown to exert higher activity when compared to those of chitosan alone and benzoyl peroxide or chlorhexidine alone. The 0.1% chitosan solution was considered to be efficacious against Staphylococcus intermedius isolated from a dog with superficial pyoderma in both in vivo and in vitro and have a potential for the clinical applications in the treatment or pyoderma in dogs.

• Journal of the Mineralogical Society of Korea
• /
• v.23 no.1
• /
• pp.51-61
• /
• 2010

Ettringite $(Ca_6[Al(OH)_6]_2(SO_4)_3{\cdot}26H_2O)$ is a sulfate mineral that shows a complicate property in concrete. It is often called as "a cancer of concrete" because secondary ettringite formation in hardened concrete often cause expansion and cracking of concrete due to its expansive crystal structure. In the present study, we tested the possibility for crystal growth inhibition of secondary ettringite by crystallization inhibitors that are commercially used for scaling inhibitors in Korea. For the test, we developed a method of ettringite solution synthesis. Three types of crystallization inhibitors were selected and examined the effects On ettringite growth inhibition. The experimental results of ettringite solution synthesis indicated that ettringite was successfully synthesized under condition that the mass balance between calcium hydroxide saturated solution and aluminum sulfate solution was attained. Monosulfate and semisulfate were synthesized when the ratio of $Ca^{2+}$ ions to ${SO_4}^{2+}$ ions was increased. The induction time of ettringite crystallization was less than 2 min. and crystallization was almost completed within an hour. The experimental results of ettringite crystallization inhibition showed that organic PBCT (2-Phosphonobutane-1,2,4-Tricarboxylic Acid) and inorganic SHMP (Sodium Hexametaphosphate) were relatively less effective on ettringite crystallization inhibition under experimental conditions. However, organic HEDP (1-Hydoxyethylidene-1,1-Diphosphonic Acid) effectively prevented ettringite growth with producing amorphous gel phase materials up to inhibitor concentration 0.1 vol.% of aluminum sulfate solution.

• Journal of Life Science
• /
• v.22 no.3
• /
• pp.398-406
• /
• 2012

This study aimed to examine whether the polygenic profile of ACE ID and ACTN3 R577X polymorphisms is associated with muscle power performance in Korean athletes. For this study, 106 top-class power athletes (top-class group), 158 elite power athletes (elite-class group), and 676 healthy adults (control) aged 18-39 yrs were recruited and their genotypes were analyzed. The top-class group showed higher frequencies of the II genotype and I allele in ACE, as well as higher frequencies of the RR genotype and R allele in ACTN3 (top-class vs. control: 41.4% vs. 32.1% for II genotype, 67.1% vs. 57.7% for I allele, p<0.05; 42.3% vs. 29.0% for RR genotype, 65.3% vs. 54.8% for I allele, p<0.05). In the polygenic profile, the top-class group had significantly higher frequencies of combined-II/ID+RR/RX genotype than the control group (top-class vs. control: 82.9% vs. 66.7% for II/ID+RR/RX, p<0.05), and there was even a sharp increase in total genotype score (TGS) in this group compared to the elite-class and control groups ($66{\pm}0.9$ vs. $58{\pm}1.9$ vs. $56{\pm}2.3$, p<0.05). The combined-II/ID+RR/RX genotype showed the possibility of succussion in the top-class muscle power performance with an odds ratio of 2.3 (CI:1.4-4.1, p<0.05). These results suggested that ACE and ACTN3 need to interact with each other to affect muscle-power performance in an additive form. Furthermore, the polygenic profile of ACE and ACTN3 can predict muscle performance with high success in a homogeneous dominant combined genotype (II/ID+RR/RX). A further study could identify and combine other genes into ACE and ACTN3 for muscle strength.

• Korean Journal of Ecology and Environment
• /
• v.37 no.3 s.108
• /
• pp.332-343
• /
• 2004

This study was conducted to test a possibility of water quality improvement using a filter-feeding bivalve (Corbicula leana). In mesocosm scale (width ${\times}$ length ${\times}$ depth: 3 m ${\times}$ 3 m ${\times}$ 0.5 m), we investigated the changes of dissolved nutrient and particulate matter including both abiotic and biotic seston. Short term (16 days) mesocosm experiment was conducted in two stages: the first stage for 8 days and consecutive 8 days of the second stage. Both treatment and control mesocosm were switched over by translocating mussels from the treatment mesocosm to the control, at 8th days since the start of the experiment. This design made it possible to compare mussel effect on the water quality change more clearly. The high mortality of mussel was observed in the treatment of the first stage, but it decreased rapidly and stabilized on the 8th day to less than< 4 ind $day^{-1}$. Chl. a concentration in the treatment mesocosm of the first and second stage decreased to 71 and 88% of initial concentration, respectively, and suspended solids decreased to 70 and 77%. At those times, average filtering rate were 0.46 and 0.61 mL AFDW $mg^{-1}$ $hr^{-1}$, respectively. Both $NH_3-N$ and dissolved total phosphorus (DTP) concentrations increased with the mussel mortality. $NH_3-N$ concentration was positively correlated with the mussel mortality, while DTP concentration showed negative correlation with it. After translocating mussel from the treatment to the control, $NH_3-N$ concentration significantly increased compared with that of initial control. Although DTP concentration also increased, there was no significant difference relative to that of initial control. These results suggest that application of this filter-feeding bivalve in a eutrophic reservoir could be a potential tool to improve water quality if mussels could acclimatize successfully in early stage of the introduction.

• Applied Chemistry for Engineering
• /
• v.31 no.2
• /
• pp.115-124
• /
• 2020

Sustainable plastics can be mainly categorized into (1) biodegradable plastics decomposed into water and carbon dioxide after use, and (2) biomass-derived plastics possessing the carbon neutrality by utilizing raw materials converted from atmospheric carbon dioxide to biomass. Recently, biomass-derived engineering plastics (EP) and natural nanofiber-reinforced nanocomposites are emerging as a new direction of the industry. In addition to the eco-friendliness of natural resources, these materials are competitive over petroleum-based plastics in the high value-added plastics market. Polyesters and polycarbonates synthesized from isosorbide and 2,5-furandicarboxylic acid, which are representative biomass-derived monomers, are at the forefront of industrialization due to their higher transparency, mechanical properties, thermal stability, and gas barrier properties. Moreover, isosorbide has potential to be applied to super EP material with continuous service temperature over 150 ℃. In situ polymerization utilizing surface hydrophilicity and multi-functionality of natural nanofibers such as nanocellulose and nanochitin achieves remarkable improvements of mechanical properties with the minimal dose of nanofillers. Biomass-derived tough-plastics covered in this review are expected to replace petroleum-based plastics by satisfying the carbon neutrality required by the environment, the high functionality by the consumer, and the accessibility by the industry.

• Korean Journal of Food Science and Technology
• /
• v.45 no.1
• /
• pp.1-7
• /
• 2013

Niphon spinosus, Epinephelus bruneus, and Epinephelus septemfasciatus are involved in the Perciformes Order and Serranidae Family. When E. bruneus and E. septemfasciatus are fully grown, the striped pattern on the body gradually disappears. Therefore, morphological classification of adult fishes is quite difficult to identify the differences to N. spinosus. In this study, we investigate the method to differentiate those using PCR. To design the primers, 16S rRNA region of N. spinosus, E. bruneus, and E. septemfasciatus registered in the GeneBank (www.ncbi.nlm.nih.gov) have been used and for the analysis, Bio Edit ver. 7.0.9.0 was used. As a result, it was design NS-003-F/NS-005-R (136 bp), EB-001-F/EB-002-R (181 bp), and ES-001-F/ES-001-R (123 bp) primers for the differentiation of each 3 different fishes. Therefore, the species-specific primer sets would be a useful tool for scientific and speedy differentiation against the illegal distribution for consumer protection.

• Journal of Food Hygiene and Safety
• /
• v.29 no.4
• /
• pp.268-277
• /
• 2014

This study assessed microbiological hazards at postharvest stage of dropwort farms (A, B, C, D, E, F, G, H, I) located in 4 different areas in Korea. The samples were assessed for sanitary indication bacteria (total aerobic bacteria, coliform, and Escherichia coli) and pathogenic bacteria (Escherichia coli O157:H7, Listeria monocytogenes, Staphylococcus aureus and Bacillus cereus). Total aerobic bacteria and coliform in 9 dropwort farms were detected at the levels of 0~7.00 and 0~4.25 log CFU/g, mL, of $100cm^2$. In particular, microbial contamination in worker's hand showed higher than cultivation environment factors. Escherichia coli was detected in several farms of soil, irrigation water, washing water and worker's hand and also, dropwort in these farms was contaminated with E. coli (positive reaction). In case of pathogenic bacteria, B. cereus was detected at the highest levels in soil. S. aureus was detected qualitatively from only one sample of dropwort washed by water. E. coli O157:H7 and L. monocytogenes were not detected. Although dropwort pass through 2 process (trimming and washing), the microbial contamination was not differ significantly before and after which indicates that current washing system was not effect on reduction of microorganism. From these results, the postharvest environment and workers have been considered as cross-contamination factors. Thus, processing equipments and personal hygiene should be managed to reduce the microbial contamination of dropwort. Accordingly management system such as good agricultural practices (GAP) criteria is needed for the safety of dropwort