• Proceedings of the Korean Information Science Society Conference
• /
• 1999.10b
• /
• pp.437-439
• /
• 1999

적외선 열 화상에는 물체 내부의 결함과 그 물체 표면의 이물질 등의 효과가 모두 포함된 상태이므로 적외선 열 화상 자체만으로는 비정상적인 부분들을 찾아내기 어렵다. 따라서 본 논문에서는 평행 이동 관계에 있는 두 가시광선 영상으로부터 열 화상에 대응하는 보간 영상을 생성하고, 이것을 열 화상과 중첩시킴으로써 가시화하는 방법을 연구한다. 이를 위해서 적외선 센서에 의해 감지된 온도를 매핑한 열 화상을 적외선 카메라로부터 얻고, 적외선 카메라의 양쪽에 부착된 CCD 카메라로부터 좌우의 가시광선 영상을 얻는다. 보간 영상 생성을 위해서 블록 매칭을 이용한 모션 정보를 사용하고, 생성된 보간 영상에서 생기는 구멍(hole)을 메우는 방법을 소개한다. 또한 생성된 보간 영상과 열 화상을 중첩시켜 가시화하는 방법을 기술한다. 이렇게 함으로써 본 논문에서 제안한 가시화 기법은 재해방지를 위한 비파괴 검사 등에 이용될 수 있다.

• Journal of Aerospace System Engineering
• /
• v.12 no.4
• /
• pp.57-63
• /
• 2018

IR thermography is a non-invasive method and used for the visualization of the surface temperature of the model. However, this technique only derives 2D results and not quantitative data. The goal of this study is to apply the 3D mapping technique for IR thermography. The wind tunnel model is an ogive-cylinder with a wind speed of 20 m/s ~ 80 m/s and the angle of attack ranging from $0^{\circ}$ to $90^{\circ}$. The real location of the model was made to correspond with the position of the IR image using the makers. Based on this result, quantitative results were obtained. The 3D mapping method was verified by comparing the separation point and the theoretical value.

• Journal of Sensor Science and Technology
• /
• v.9 no.1
• /
• pp.44-50
• /
• 2000

Every object emits some energy from its surface. The emission energy forms surface heat distribution which we can capture by using an infrared thermal imager. The infrared thermal image may include valuable information regarding to the subsurface anomaly of the object. Since a thermal image reflects surface clutter and subsurface anomaly, we have difficulty in extracting the information on the subsurface anomaly only with thermal images taken under a wavelength. Thus, we use visible wavelength images of the object surface to remove exterior clutter. We, therefore in this paper, visualize the infrared image for overlaying it with a visible wavelength image. First, we make an interpolated image from two ordinary images taken from both sides of an infrared sensor. Next, we overlay the intermediate image with an infrared image taken from the infrared camera. The technique suggested in this paper can be utilized for analyzing the infrared images on non-destructive inspection against disaster and for safety.

• 한국가시화정보학회:학술대회논문집
• /
• 2005.12a
• /
• pp.69-73
• /
• 2005

Three-dimensional density distributions of an impinging and eccentric flame have been analyzed numerically and experimentally by a combined optical system with a digital speckle tomography. The flame has been ignited by premixed butane/air from air holes and impinged vertically against a plate located at the upper side of tile burner nozzle. In order to compare with experimental data, computer synthesized phantoms of impinging and eccentric flames have been made and reconstructed by a developed three-dimensional multiplicative algebraic reconstruction technique (MART). A new scanning technique has been developed for the analysis of speckle displacements to investigate wall jet regions of the impinging flame including sharp variation of the flow direction and pressure gradient. The reconstructed temperatures have been compared with a temperature photography by an infrared camera and results of numerical analysis using a finite-element method.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.2
• /
• pp.99-107
• /
• 2016

Test research on Infra-Red Thermography(IRT) technique in a supersonic wind tunnel has been conducted. Inadvertent technical difficulties and their solutions associated with the technique in running of the facility were examined. Two flow conditions at Mach number of 3 and 4 were considered. A double compression ramp model, that replicates realistic high-speed vehicle configuration, was used as test model. The present IR data were compared with shadowgraph visualization images and laminar computational fluid dynamics(CFD) results. It has been shown that the IRT technique can be used in quantifying various fluid dynamic features such as flow transition, separation and three-dimensional phenomena around the double compression ramp model.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.70-70
• /
• 2017

영상처리 기법을 이용한 유속 측정 방법인 표면영상유속계는 비접촉식으로 간편하게 유속을 측정할 수 있다는 장점이 있지만 영상 내 추적자의 움직임을 식별하기 어려운 야간의 경우와 새벽의 안개가 발생하는 경우에 대한 유속 측정의 어려움이 있었다. 표면영상유속계를 이용한 야간 유속 측정은 조명과 적외선 카메라를 이용하여 수표면을 가시화하는 방법을 통해 현장 적용성을 검증하였으나, 안개 발생 상황에서는 적용하기 어렵다는 한계가 있었다. 야간과 안개 등의 한계를 동시에 극복하기 위한 방법으로 원적외선 카메라를 이용한 연구들이 이루어지고 있지만 아직 시작단계이고, 원적외선의 경우 주변 환경 변화에 따라 물체의 표면온도가 검출되는 파장이 달라져 영상의 품질에 차이가 발생하기 때문에 이에 대한 다양한 실험적 연구가 필요하다. 이에 본 연구에서는 야외 개수로에서 드라이아이스를 이용하여 안개 조건을 재현하고, 다양한 흐름 조건에서 원적외선 영상을 이용한 표면유속 측정 적용성을 검토하였다. 안개가 발생하는 경우 원적외선 표면영상 유속계를 적용한 결과 안개가 없을 때의 유속 측정 결과와 거의 일치하는 것을 확인하였다. 따라서 원적외선 카메라를 이용한 표면유속 측정 방법은 야간과 안개가 발생하는 상황에 모두 사용하기에 적합한 것을 나타났다. 향후 하천 유량조사에 원적외선 카메라를 활용한다면 기존의 표면영상유속계의 비가시 환경에 대한 한계들을 많은 부분 극복할 수 있을 것으로 기대한다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.6
• /
• pp.465-474
• /
• 2014

To validate the accuracy of the boiling heat flux partitioning model, an experiment was performed to investigate how the wall heat flux is divided into the three heat transfer modes of evaporation, quenching, and single-phase convection during subcooled nucleate boiling on a vertical wall. For the experimental partitioning of the wall heat flux, the wall heat flux and liquid-vapor distributions were simultaneously obtained using synchronized infrared thermometry and the total reflection technique. Boiling experiments of water with subcooling of $10^{\circ}C$ were conducted under atmospheric pressure, and the results obtained at the wall superheat of $12^{\circ}C$ and average heat flux of $283kW/m^2$were analyzed. There was a large difference in the heat flux partitioning results between the experiment and correlation, and the bubble departure diameter and bubble influence factor, which account for a portion of the surrounding superheated liquid layer detached by the departure of a bubble, were found to be important fundamental boiling parameters.