• International Journal of Highway Engineering
• /
• v.11 no.2
• /
• pp.111-120
• /
• 2009

This paper presents a fundamental findings of the functional and structural performance of the porous asphalt concrete coated with MMA resin. To evaluate the structural performance, cantabro, wheel tracking, moisture sensitivity and indirect tensile fatigue tests are performed. The tests results show that the cantabro loss is reduced three times and fatigue resistance is significantly increased after the specimens are coated with MMA resin. However there are little changes in the rutting and moisture damage resistances before and after the coating. Air voids, permeability and BPT(British Pendulum Test) tests are conducted to study the functional performance. It is observed form the tests that the air voids and permeability are slightly decreased after the coating. However, the changes in the air voids and permeability are negligible. The skid resistance of the coated specimens is lower than reference specimens. However, the skid resistance is maintained beyond the level of the reference specimens when silica sands are chipped on top of the coated surface.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.5
• /
• pp.2375-2380
• /
• 2013

In this paper, we have implemented the unified fuel heater and performance evaluation system for diesel cars. In order to strengthen an engine starting of diesel car, we need to assembly the fuel filter and heater. Especially, this assembly fuel heater is very important in winter, it is necessary for heating to operate the diesel engine. The heater for unifying the sensor and heater body can advance the performance of car and reduce the production cost. Finally, the performance test chamber is needed to evaluate the performance of heater.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.05b
• /
• pp.681-687
• /
• 1995

316LN 스테인레스강의 예민화 특성에 미치는 합금성분의 영향을 분석하기 위해 4종류의 다른 조성을 갖는 합금을 제조하여 Oxalic 시험, Modified Strauss 시험 그리고 DL-EPR 시험을 수행하여 각 시험조건에서의 예민화 특성을 관찰하였다. 실험결과, 짙소 첨가는 예민화 저항성을 증가시키나 그 정도는 미약하여, 0.16 % 질소 첨가강의 예민화 곡선에서 꼭지점은 75$0^{\circ}C$, 3 시간에 위치하였다. 반면, Ti과 B 첨가는 316LN강의 예민화 거동에 매우 큰 영향을 미치며, 0.03 % Ti 및 0.0036 % B 첨가강의 예민화 곡선에서 꼭지점은 14 시간까지 나타나지 않았다. Effective Cr량과 예민화 저항성과의 관계를 경험적으로 표현한 여러가지 관계식에 4종류의 스테인레스 강을 적용시켜 본 결과 기존의 식으로는 Ti 및 B 첨가강에서 발생한 현저한 예민화 저항성 증가를 선명할 수가 없었다. Ti과 B의 성분을 고려한 새로운 관계식이 제안되어야 할 것으로 사료된다.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.1
• /
• pp.13-19
• /
• 2004

The major distress types in the domestic asphalt pavement are fatigue cracking, reflection cracking, thermal cracking, and rutting. To decrease the pavement distress by reinforcing asphalt pavement with reinforcement interlayer in geosynthetics to the traditional pavement systems can improve these problems. This study conducted laboratory test with asphalt pavement reinforced by glass fiber sheet to fix systematically geosynthetic asphalt pavement system. Laboratory tests like wheel tracking test and crack resistance test are conducted to analyze the controlling effect of glass fiber sheet on cracking and rutting of asphalt pavement.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2012.05a
• /
• pp.527-528
• /
• 2012

DBD (Dielectric Barrier Discharge) plasma actuator was designed for aerodynamic drag reduction using plasma flow control, and the drag reduction was measured by wind-tunnel tests using 2D test model. At the zero wind velocity, the plasma flow control had no effect on the drag reduction because the flow separation and surface friction drag were not occurred. At the wind velocity of 2m/s, 9.7% of drag was reduced by the flow separation control. The drag reduction decreased as the wind velocity increased.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.31 no.4
• /
• pp.18-21
• /
• 1994

시제품을 만들어 본 후 대량 생산에 들어가는 여느 공업과는 달리, 조선공업에서는 시제품을 미리 만들어 볼 수가 없으므로 실선의 성능을 미리 추정하는 것은 참으로 중요한 과제 중의 하 나이다. 그 가운데 하나인 저항추진성능을 추정하는 데에는 통계해석 방법이 널리 쓰이고 있다. 여기서 통계해석은 모형시험 결과를 표본자료로 한 통계해석을 말한다. 실선의 저항추진성능을 추정하는 것이므로 실선 속력시운전 자료를 사용하는 것이 좋겠으나, 실선 속력시운전에서 정 확한 값을 얻는다는 것이 거의 불가능하므로 대부분 모형시험 값을 이용하곤 한다. 본 고에서는 기존에 발표된 여러 가지 도표와 회귀식을 요약하여 본 후, 표본자료를 이용하여 새로운 회귀 식을 만드는 과정을 소개하고자 한다.

• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.220-221
• /
• 2013

UPS 부하시험시 또는 DC 전압원 방전 시험시에 사용되는 일반 저항 또는 역률 부하 시험기를 사용하지 않고 UPS 내부 역변환부 출력전원을 출력 스위치와 바이패스 스위치를 통해서 순변환부 입력전원에 재공급함으로써 시험용 저항부하기 또는 역률 부하 시험기와 같이 모든 에너지를 열로 소비하지 않고 순변환부 측으로 재 순환시켜서 UPS 부하시험 시 입력 전원용량이 UPS 최소 내부 손실분만으로도 이미 현장 설치 및 운영 중인 UPS에서도 별도의 부하 시험기 및 시험용 케이블을 이동, 설치하지 않고 주기적인 UPS 점검 시, 적용 가능한 에너지 절감형 부하시험기법에 관해 연구하였다.

• Journal of the Korea Concrete Institute
• /
• v.29 no.4
• /
• pp.361-369
• /
• 2017

Setting time of cement-based materials can represent a developing strength in early-age mixture, and it can be used a significant parameter of high-performance concrete having various mix-proportions. Generally, initial and final setting time of concrete is measured by penetration resistance method that used a wet-sieving mortar mixture, therefore, it hardly represents the setting time of sound concrete including coarse aggregate. Recently, several nondestructive methods, such as ultrasonic velocity and impendence measurement, are proposed to evaluate the setting time of fresh concrete. This study attempts to measure an electrical resistivity using four-electrode method for evaluation of setting time in early-age cement-based materials. For this purpose, total 10 mixtures are prepared as different mix-proportions including chemical admixture. Based on the experimental results, two electrical parameters, such as initial electrical resistivity and rising time, are proposed to reflect a microstructure development by hydration of cement-based materials. As a result, proposed parameter is also discussed with the measured setting time by penetration resistance method.

• Journal of the Society of Disaster Information
• /
• v.7 no.2
• /
• pp.87-95
• /
• 2011

The skid resistant of pavement surface is an important parameter since it is directly related to the traffic safety under moving vehicular loads. In particular, it should be considered as a major factor in pavement performance evaluations to reduce the traffic accident from vehicular sliding. In this study, a portable and an automatic skid resistance tests were used to evaluate the skid resistances of the in-situ pavements. The test results showed that the skid resistance of the conventional dense graded pavement was more noticeable than the other pavement types such as the drainage pavement and the stone mastic asphalt(SMA) pavement as the service life of pavement was increased.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.1C
• /
• pp.37-44
• /
• 2010

Recently, urban retrofit and extension, development of new buildings and facilities, and construction of underground structures like subway tunnels in urban areas give rise to significance of site investigation at urban areas. However, ambient electric noises, traffic vibrations, embedded objects work as obstacles to high-quality and accuracy in site investigation at urban areas. In this paper, a new technique called the pseudo-DC resistivity survey (in brief, PDC-R) was proposed to minimize the adverse effect of ambient electrical noises in resistivity survey. PDC-R technique utilizes an AC current with frequency range of 0.1 to 1.0 Hz rather than DC current, which is used for conventional resistivity survey. The motivation of using low-frequency AC current is to avoid 60-Hz components or its multiples in the resistivity survey which ambient noises are mostly composed of. The implementation of PDC-R technique also included the parametric study on skin effect, frequency effect and current-level effect, which led to the determination of optimal values of frequency and current level for PDC-R survey. The reliability and feasibility of PDC-R technique was verified through field tests, accompanied by the comparison with DC resistivity survey and CapSASW tests.