• Explosives and Blasting
• /
• v.34 no.4
• /
• pp.19-27
• /
• 2016

Much care should be taken when electric caps are used in blast site than when non-electric initiation systems are used. This is because electric caps can cause premature firing or misfires if stray currents of high magnitude flow into the blasting circuit. If the rock has higher electrical conductivity or lower electrical resistivity, such risks will be increased because the rock will provide more passages for the stray currents to flow into the blasting circuit. In this study, several rock samples obtained at a blast site were tested for electrical resistivity to decide whether electric caps could be used or not in the site. The measured electrical resistivity was $39{\sim}47{\Omega}{\cdot}m$ for the rock samples that had a higher content of metal sulfides. Contrary, the resistivity was $15000{\sim}21000{\Omega}{\cdot}m$ for ordinary rocks. Especially, in the case of the rock of electric resistivity of $39{\Omega}{\cdot}m$, only 2-V electric potential enables a stray current to flow through the rock of 1-m length, which can cause the premature firing of a detonator whose initiation current is 0.4 A. This result shows that electric initiation system should not be used in the site because rocks containing much amount of metal sulfides are widely distributed there.

• Journal of Life Science
• /
• v.8 no.5
• /
• pp.537-549
• /
• 1998

This investigation was performed to isloate and identify the total bacteria, Staphylococcus spp. and fungi from the indoor air exposed for 30 minutes on the blood agar plate at the 27 places in a hospital. Antibiotic susceptibility tests of the isolated bacteria were also studied. The mean numbers of total bacteria, Staphylococci spp. and fungi were 26, 17, and 2 in the summer and 19, 8, and 2 in the winter, respectively. Staphylococcus epidermidis was the most common isolated bacteria, and the next was Staphylococcus aureus, Aerococcus spp., Micrococcus spp., and Bacillus spp. from the indoor-air of hospital. Aspergillus spp., Cephalosporum spp., Curvularia spp., penicillium spp., and Phialophora spp. was frequently isolated from the indoor-air of hospital. The 109 strains of isolated Staphylococcus epidermidis sho-wed resistance to tetracycline(45.0%), methicillin(40.2%), erythromycin(31.2%), and kanamycin(24.8%). The 76 strains of isolated Staphylococcus aureus showed resistance to erythromycin(71.7%), methicillin(63.2%), kanamycin (44.7%), tetracycline(39.5%), and ampicillin(32.9). The 67 strains of isolated Aerococcus spp. showed resistance to erythromycin(26.9%), methicillin(25.4%), kanamycin(22%), and tetracycline(22.4%). The 48 strains of isolated Micrococus spp. showed resistance to tetracycline(27.0%), methicillin(22.9%), erythromycin(22.9%), and kanamycin(20.8%).

• Geophysics and Geophysical Exploration
• /
• v.4 no.4
• /
• pp.124-132
• /
• 2001

Electrical resistivity survey has been conducted for delineating geological fault structure in Kaekok-ri near Kyungju. In general, electrical resistivity survey has an advantage of searching buried faults and its traces compared with other geophysical survey methods. Distribution of electrical conductivity in the ground is influenced by the ratio of pores, groundwater and clay minerals. These properties are evidenced indirectly to explain for weathering condition, faults and fracture Bones. Thus the electrical resistivity survey can be an effective method to find buried faults. We have carried out two dimensional (2-D) interpretation by means of smoothness-constrained least-squares and finite element method. Field data used in this paper was acquired at Kaekok-ri, Wuedong-eup, Kyungju-si, where is Ulsan Fault and is close to the region in which debatable quaternary fault traces were found recently. The dipole-dipole array resistivity survey which could show the 2-D subsurface electrical resistivity structure, was carried out in the area with three lines. The results showed good property of fault, fracture zone and fault traces which we estimated were congruous with the results. Through this study, 2-D electrical resistivity survey interpretation for fault is useful to apply.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2006.04a
• /
• pp.247-252
• /
• 2006

오염 퇴적물내 중금속의 방출과 이에 따른 생이용성(bioavalability)은 기존의 가역 평형관계로써 설명하기에 불충분한 것으로 알려져 있다. 최근 연구결과에 의하면 이러한 탈착 저항성을 설명하기 위한 비가역적 모델에 의해 퇴적물내 중금속의 탈착저항성 부분이 존재함이 밝혀졌다. 탈착저항성에 대해서는 아직 충분한 규명이 이루어지지 않았으나, 오염물질의 노화(aging)에 의해 일단 탈착저항성을 띠게 되면 생이용성(bioavailability)이 감소되는 것으로 알려져 있다. 본 연구에서는 노화(aging)가 연안 퇴적물 내 납과 카드뮴의 흡/탈착 특성에 미치는 영향을 알아보기 위해 연속 탈착실험과 biphasic 탈착모델을 적용함으로써 납과 카드뮴의 탈착저항성을 규명하고자 하였다. 그리고 연속 추출 실험을 통해서 노화(aging)에 따른 퇴적물 내 납과 카드뮴의 흡착 기작을 규명하고자 하였다. 연속탈착 실험 결과 시간이 경과함에 따라 탈착저항성부분의 크기가 증가하였으며, 연속추출 실험 결과 납의 경우 carbonate fraction에서 추출된 납이 가장 많았으며, 노화(aging) 따라 exchangeable fraction에서 추출된 납이 감소하는 반면 reducible, organic material, residual fraction에서 추출된 납의 양이 증가하였다. 카드뮴의 경우 가장 많은 양이 추출된 단계는 exchangeable fraction이였으며, organic material fraction에서는 카드뮴이 추출되지 않았다. 노화(aging) 따라 reducible fraction과 residual fraction에서의 추출량이 증가하는 경향을 보였으나 그 양은 매우 적은 것으로 나타났으며, 노화(aging)에 따른 exchangeable fraction과 carbonate fraction에서의 추출량은 큰 변화가 없었다. 대해서는 북한지역의 분포상황을 밝혔다.것을 알 수 있었으며, 크롬과 비소의 경우는 초기에 많이 용출되고, 구리의 경우는 꾸준히 용출되는 것을 알 수 있었다. 3년 된 통나무집이 8년 된 통나무집보다. 용출양이 더 컸으며, 이는 CCA성분이 초기에 많이 용출된다는 것을 의미한다. 억제 효과를 나타내었고 Hep3B에서는 부탄을 분획물 (1 mg/mL)에서 82%의 비교적 높은 성장억제효과를 나타내었다.as a "front" and "back". Thus, Germany′s private space may face a genuine public space and street, which is rare in the Korean housing. Although the layout of indoor space in the korean housing tends to be open, such an openness may be outstanding in living and dining spaces, kitchen and various accesses to rooms. In the case of Germany, such indoor spaces are usually closed to each other. Thus corridors act to separate these spaces. Such differences are analysed to be due to the different perceptions of interpersonal and socio-cultural attributes as intra-family and inter-neighbor relationships or communications. 알 수 있었다.도 질소와 인산처럼 토양지지대가 있는 경우가 낮은 함량을 유지하였다.pe from the daily life, to fantasize and daydre

• 한국지구물리탐사학회:학술대회논문집
• /
• 2008.10a
• /
• pp.131-136
• /
• 2008

We performed a non-destructive geophysical survey such as an elastic wave survey, electric specific resistance survey, plate loading test, etc. in order to grasp the structure and status of the ground around the pillar gate and to provide the directions and design data for preservation and maintenance during reconstruction. The result of electric specific resistance survey shows 50-1300 ohm-m range of general electric specific resistance distribution. Besides, the positions around 1m south of stone pillars, between stone pillar No.3 and 4, and 1m north of stone pillar No.2 and 3 show abnormality of relatively lower electric specific resistance than their surroundings. The abnormality of low electric specific resistance appearing between stone pillar No.3 and 4 shows consistency with the abnormal section appearing from the result of elastic wave reflection survey. The result of a plate loading test shows that allowable bearing force is over $10.70tf/m^2$, and the settlement amount at this time was calculated as 19.635mm. The design load during reconstruction of pillar gates was calculated as $16.37t/m^2$ by applying assumption values, which is far more than the allowable bearing force, so it is judged that a measure to strengthen the foundation ground is necessary.

• Korean Chemical Engineering Research
• /
• v.50 no.2
• /
• pp.317-327
• /
• 2012

The average specific cake resistance, the most important indicator for cake filtration and solid-liquid separation, is measured by filtration experiment. But the exact value is difficult to measure because of the other influences such as sedimentation during filtration. This study, a little more stable method named filtration-permeation is proposed for measuring average specific cake resistance. The filtration-permeation is composed of permeation of particle eliminated water through pre-formed cake by filtration. Using 1 wt% calcium carbonate suspension, the filtration-permeation experiments were performed for 8 kinds of filter media at the conditions of 0.5 atm and 0.2 atm, 1 and 3 sheets of filter media. At each specific condition, three to five times filtration-permeation were accomplished. As a result, stable permeation speed is measured. According to this experimental result, the characteristics of permeation and the effect of sedimentation are analyzed with Ruth's equation. The one way analysis of variance (one way ANOVA) is applied to the average specific cake resistances of filtration and permeation obtained with the selected three kinds of filter media. The average specific cake resistances between 0.5 atm and 0.2 atm by filtration do not distinguished, but those by permeation is perfectly distinguished. The experimental results during permeation have a very narrow distribution than that measured during filtration. The analysis of filtration experiments, it was verified that the resistance of filter medium by traditional method is of no significance. Finally, the migration of small particles through the medium composed of fiber glass at low pressure was studied.

• The Journal of Engineering Geology
• /
• v.31 no.4
• /
• pp.507-522
• /
• 2021

Specific survey objectives often cannot be met using only one geophysical method, as each method's results are influenced by the specific physical properties of subsurface materials. In particular, areas susceptible to geological hazards require investigation using more than one method in order to reduce risks to life and property. Instead of analyzing the results from each method separately, this work develops a four-quadrant criterion for classifying areas of levees as safe or weak. The assessment is based on statistically determined thresholds of seismic velocity (P-wave velocity from seismic refraction and S-wave velocity from multichannel analysis of surface waves) and electrical resistivity. Thresholds are determined by subtracting the standard deviation from the mean during performance testing of this correlation technique applied to model data of four horizontal and inclined fracture zones. Compared with results from the crossplot of resistivity and P-wave velocity, crossplot analysis using resistivity and S-wave velocity data provides more reliable information on the soil type, ground stiffness, and lithological characteristics of the levee system. A loose and sandy zone (represented by low S-wave velocity and high resistivity) falling within the second quadrant is interpreted to be a weak zone. This interpretation is well supported by the N values from standard penetrating test for the central core.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.7
• /
• pp.971-979
• /
• 2023

Small ships (<499 GT) constitute 46% of the existing ships, therefore, it can be concluded that they produce relatively high CO₂ gas emissions. Operating in optimal trim conditions can reduce the resistance of the ship, which results in fewer greenhouse gases. An affordable way for trim optimization is to adjust the weight distribution to obtain an optimum longitudinal center of gravity (LCG). Therefore, in this study, the effect of LCG changes on the resistance of a small planing ship is studied using empirical and numerical analyses. The Savitsky method employing Maxsurf resistance and the STAR-CCM+ commercial computational fluid dynamics (CFD) software is used for the empirical and numerical analyses, respectively. Finally, the total resistance from the ship design process is compared to obtain the optimum LCG. To summarize, using numerical analysis, optimum LCG is achieved at the 46.2% length overall (LoA) at Froude Number 0.56, and 43.4% LoA at Froude Number 0.63, which provides a significant resistance reduction of 41.12 - 45.16% compared to the reference point at 29.2% LoA.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.6
• /
• pp.688-696
• /
• 2023

In the present study, free roll decay and resistance performances of fishing vessels were evaluated with the combinations and variations of in the parameters of appendages which are attached to improve motion performance of fishing vessels. Computational Ffluid Ddynamics was used to perform free roll decay and resistance analysis. The roll period and decay coefficient were derived by the variations in the combination and dimensions of the primary appendages of the bilge keel and the under keel. It was observed thatThe variations of in the length of the under keel did not significantly impact to the roll damping coefficient. Conversely, for the bilge keel, an increase in the length and angle resulted in an increase in the roll damping coefficient. Comparison of resistance performance was additionally assessed among the selected hulls with the appendages and bare hull. The resistance of the hull with the appendages was higher than that of the bare hull due owing to the changes of in the pressure on the surface of the hull and trim angle. Throughout the present study, the impact of appendage parameter and arrangement on the free roll decay and resistance performance of fishing vessels were was assessed,. which This will be beneficial for the application of appendages to fishing vessels.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.1
• /
• pp.1-11
• /
• 2008

Statement of problem: Over the past decade, increased demand for esthetically pleasing restorations has led to the development of all-ceramic systems. Recent reports suggest that the all-ceramic crowns have excellent physical properties, wear resistance, and color stability. In addition, numerous ceramics have excellent biocompatibility, a natural appearance, and improved physical bonding with resin composite luting agents. However, the brittle nature of ceramics has been a major factor in their restriction for universal usage. Functional occlusal loading can generate stress in the luting agent, and the stress distribution may be affected by the marginal geometry at the finish line. Tooth preparation for fixed prosthodontics requires a decision regarding the marginal configuration. The design dictates the shape and bulk of the all ceramic crowns and influences the fit at the margin. Purpose: The purpose of this study was to evaluate the stress distribution within marginal configurations of all- ceramic crowns (90-degree shoulder, 110-degree shoulder, 135-degree shoulder). Material and methods: The force is applied from a direction of 45 degrees to the vertical tooth axis. Three-dimensional finite element analysis was selected to determine stress levels and distributions. Results and conclusion: The result of stress level for the shoulder marginal configuration was more effective on stress distribution at 135-degree shoulder margin. But the stresses concentrated around at 135-degree shoulder margin. The stress decreased apically at the surface between cements and alumina core, and increased apically at the surface between alumina core and veneering porcelain.