• Journal of the Society of Naval Architects of Korea
• /
• v.33 no.1
• /
• pp.54-64
• /
• 1996

It seems that blowing air bubble out of the bulb surface of a ship of flat bottom will reduce the frictional resistance, since wetted area of the hull surface is reduced owing to air bubble staying close to the surface. To as certain this concept, at first, the limiting streamlines around the bow was observed, and local distribution of pressure and shear stress, due to the change of air-blowing position, air supply pressure, and the model speed, was investigated. It was found that the local friction was reduced near the bulb and air-bubble formations also play an important role as a drag component. This paper can be considered as a preliminary study on the drag reduction of conventional ships by the micro-bubble injection.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.189-189
• /
• 2000

고분자 재료에 이온을 주입함으로서 경도, 내마모, 내피로성의 기계적인 특성과 내부식성 등의 화학적 특성이 향상되며, 표면 전기전도도와 광학밀도(optical density)가 변한다. 본 연구에서는 MPPO(Modified-Polyphenlene Oxide) 표면에 N2, Ar, Xe 이온을 에너지 50keV, 선량(dose)을 1$\times$1015에서 1$\times$1017ions/cm2로 증가시키면서 조사하였다. 이온 조사량의 증가에 따라 표면 저항이 2$\times$1015에서 6$\times$106($\Omega$/$\square$)으로 감소하여 표면 전기전도도가 향상되었다. Ar 이온은 1016ion/cm2이하의 조사량(dose)에서 N2보다 표면 저항을 더 많이 감소하는데 반해 1016ion/cm2 이상의 조사량에서는 Ar과 N2의 표면 저항이 비슷한 값을 나타냈다. Xe은 Ar과 N2이온에 비하여 전체적으로 표면저항이 많이 감소하여 전도도의 향상은 Xe, Ar, N2 순서로 질량이 큰 이온이 조사 효과가 큰 것으로 나타났다. 소재 표면은 SIMS 분석을 통하여 깊이에 따른 주입이온의 분포를 관찰하였으며, 표면 색상은 황색에서 갈색을 거쳐 암갈색으로 변화함으로서 가시광선에 대한 반사율(reflectance)이 감소하고 광학밀도(optical density)가 증가하여 광학적 특성이 변하였다. 이온 주입 후 에너지 전이에 의한 효과는 optical gap를 감소시켜 광학밀도(optical density)와 표면 전기 전도도를 증가시킨다. 이에 따라 본 논문에서는 이온주입에 의한 광학적, 전기적 특성간의 상관관계를 밝히고자 한다.

• Geophysics and Geophysical Exploration
• /
• v.6 no.4
• /
• pp.187-194
• /
• 2003

A small-loop electromagnetic (EM) system using multiple frequencies has advantages in survey speed and cost despite of limitation on its depth of investigation. Therefore, small-loop EM surveys have been frequently used on various site investigations involving engineering and environmental problems. We have developed a subsurface imaging technique using small loop EM data. We used a one-dimensional (ID) inversion method to reconstruct a subsurface image from frequency EM sounding data. Tests using simulated data show that the method can reasonably recover the subsurface resistivity structure. Also, the method was tested on field data obtained with multiple frequency small loop EM system at a farm in Chunchon, Korea. The resistivity image obtained form field data compares favorably with the image from the dipole-dipole resistivity survey.

• Journal of the Society of Naval Architects of Korea
• /
• v.31 no.3
• /
• pp.100-111
• /
• 1994

This study was carried out for understanding the characteristics of the spray around high speed vessels. Prismatic planing hull made of an acrylate board was used to the tests. The distribution of local spray velocity were estimated from the analysis of the spray visualization. A new test system for measuring the spray thickness is proposed, and was used to estimate the local spray thickness in the model. The pressure distributions on the bottom of the hull are measured and integrated to estimate the pressure drag of the model in the towing tests. Finally. the spray drag/lift component is separated from the total drag/lift on the prismatic hull. These test results show that the spray drag component on high speed vessels is relatively large and important in total drag.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2018.10a
• /
• pp.50-50
• /
• 2018

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2021.10a
• /
• pp.176-176
• /
• 2021

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.9
• /
• pp.534-541
• /
• 2017

The bioreactor type of landfill is to operate to enhance waste decomposition by continuously supplying water such as leachate and wastewater within the landfill, which helps increase the landfill gas production, which in turn prematurely stabilize the landfill. Recently, the environmental law for the operation of the bioreactor type of landfill has been enacted and thereafter the bioreactor type of landfill has been introduced for the first time in Korea to the SUDOKWON landfill site. In order to properly apply for bioreactor to the landfill, it is necessary to investigate the water distribution inside the landfill so that water recirculation should be optimally allocated with the zone of concern. In this regard, electrical resistivity survey has been suitably performed to delineate the water distribution in the landfill. That is, it has surveyed for long-term of period that the recirculation of leachate has been properly reflected from electrical resistivity within the second landfill of SUDOKWON landfill site. As a result, the electrical resistivity immediately corresponded to the variation of the extent of the seasonal temperature dynamics. From this, a calibratrion could be accomplished by correlating between temperature and electrical resistivity obtained from this study that can be applicable for optimally monitoring to keep the ideal operating condition for the bioreactor type of landfill.

• The Journal of Engineering Geology
• /
• v.31 no.4
• /
• pp.493-506
• /
• 2021

Liquefaction refers to a phenomenon in which excessive pore water pressure occurs when a dynamic load such as an earthquake rapidly acts on a loose sandy soil saturated with soil, and the ground loses effective stress and becomes liquefied. The indoor repeated test for liquefaction evaluation can be confirmed through the repeated triaxial compression test and the repeated shear test. In this regard, this study tried to confirm the liquefaction resistance strength according to the relative density and particle size distribution of sand using the repeated triaxial compression test. As a result of the experiment, it was confirmed that the liquefaction resistance strength increased as the relative density increased regardless of the soil classification, and the liquefaction resistance strength according to the particle size distribution of the sand was confirmed that the liquefaction resistance strength of the SP sample close to SW was significantly higher. In addition, as a result of analyzing 30% of fine powder compared to 0% of fine powder, as the relative density increased to 40~70%, the liquefaction resistance strength decreased by 5~20%, and the domestic weathered soil ground had a fine liquefaction resistance strength compared to Jumunjin standard sand. When the minute was 10%, it was measured to be 30% or more, and when the fine particle was 30%, it was measured to be less than 50%.

• Research in Plant Disease
• /
• v.7 no.2
• /
• pp.86-92
• /
• 2001

This experiment was carried out to analyze the recent epidemic of rice blast in southern provinces of Korea in 1999 and 2000. Incidences of leaf blast and panicle blast in these years were 1.5 and 2.9 times greater than those in 1998, respectively. Cultivation areas of rice cultivars, Daesan, Ilmi and Dongan bred from Milyang 95 as a recurrent parent increased over the country from 11% in 1998 to 38.4% in 2000, which were grown in more than 85% of total paddy fields in Jeonnam province. Predominant race populations of Pyricularia grisea in the farmers' fields had been changed from KJ-301 to KI-1117 in 1999 and KI-1113 and KJ-105 in 2000. Distribution ratio of the KI-1117 race in 1998 in the southern provinces was 1.7%, but increased to 30% in 1999. Although the cultivars Daesan, Ilmi and Dongan have shown wide spectrum of resistance to many races including KJ-301, they were susceptible to such races as KI-1117, KI-1113 and, KJ-105. These three races could be further classified into two sub-races, KI-1117 and KI-1117a, KI-1113 and Kl-1113a, and KJ-105 and KJ-105a based on virulence to Daesan. The newly classfied races, Kl-1113a, Kl-1117a, and KJ-l05a were also pathogenic to Ilmi and Dongan. This indicates that rice blast epidemic in southern provinces in 1999 and 2000 resulted from the breakdown of the resistance of Daesan, Ilmi and Dongan by the rapid increase of virulent races KI-1117, KI-1113, KJ-105 and their new sub-races.

• Economic and Environmental Geology
• /
• v.46 no.2
• /
• pp.105-121
• /
• 2013

This study introduces integrated approach on detection of a leakage in a sea wall based on remote sensing, electric resistivity survey, electromagnetic survey, and borehole survey for the Seosan A-Region sea wall. The satellite temperature distribution from Landsat ETM+ data identifies water leakage distribution and period by analyzing temperature mixing patterns between sea water and fresh water. Electric resistivity survey provides both horizontal and vertical anomaly distributions over the sea wall showing below average electric resistivity. Electromagnetic survey(electrical conductivity survey) reveals the potential possible leakage areas with minimal background impact by comparing electrical conductivity values between high and low tides. Borehole image processing system confirmed the locations of anomalies identified from the other survey methods and distributions of vertical fracture zones. The integrated approach identified 41.7% of the sea wall being the most probable area vulnerable to water leakage and effectively approximated both horizontal and vertical distribution of water leakage. The integrated analysis of remote sensing, electric resistivity survey, electromagnetic survey and borehole survey is considered to be an optimal method in identifying water leakage distribution, period, and extent of fractures knowledged from the boreholes.