• Geophysics and Geophysical Exploration
• /
• v.19 no.1
• /
• pp.45-50
• /
• 2016

Generally, a point source has been routinely used in the electrical resistivity measurements because of easy installation. If steel-cased wells are used as long electrodes, we can expect the better depth of investigation. However, the resistivity data with long electrodes can not be processed with a conventional inversion algorithm because a long electrode produces the different primary potential distribution compared with the point source. In this study, we proposed a new technique to process the electrical resistivity data with long electrodes by replacing the long electrode with a sequence of point electrodes. Comparing the potentials obtained from the technique with the analytic/numerical solution, we ensure that the proposed technique can be used for the numerical resistivity modeling based on the finite difference or finite element method.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2000.09a
• /
• pp.41-53
• /
• 2000

Electrical resistivity survey is widely applied to the dam seepage problems. Main purpose of the resistivity survey is to delineate the inhomogeneity in the dam. In this study, two- (2-D) and three-dimensional (3-D) resistivity survey methodology and corresponding interpretations of the data have been analyzed using 3-D resistivity modeling results. Since resistivity structures beneath the dam and its shape are 3-D in nature, we could get more accurate image of the dam structures using 3-D survey compared to 2-D survey even though we cannot employ the grid-shape survey layout.

• Journal of IKEEE
• /
• v.23 no.2
• /
• pp.370-374
• /
• 2019

It was found that temperature and humidity did not affect the leakage current since the leakage current was irregularly increased or decreased at a temperature of $22^{\circ}C$ to $32^{\circ}C$ and a humidity of 60.0% to 96.0%. The insulation resistance in the vicinity of $26^{\circ}C$ was $10.70M{\Omega}$ to $4,000.00M{\Omega}$ and was low from $9.10M{\Omega}$ to $1,000.00M{\Omega}$ before and after $26^{\circ}C$. As the humidity was increase in a range of 60%~96%, the insulation resistance was reduced from $4,000.00M{\Omega}$ to $4.80M{\Omega}$, which indicates that the temperature and humidity had an influence on the insulation resistance. The leakage current and the insulation resistance of the branch circuit to the cooking facilities were compliant with less than 1.00 mA and more than $0.20M{\Omega}$. Leakage current of 1.89 mA was non-compliant but the insulation resistance was compliant with the value of $65.00M{\Omega}$.

• Journal of the Korea Concrete Institute
• /
• v.20 no.1
• /
• pp.35-41
• /
• 2008

In general, flat plate systems have been used as a gravity load resisting system (GLRS) in building. Thus, this system should be constructed with lateral force resisting system (LFRS) such as shear walls and brace frames. GLRS should retain the ability to undergo the lateral drift associated with the LFRS without loss of gravity load carrying capacity. And flat plate system can be designed LFRS as ordinary moment frame with the special details. Thus, flat plate system designed as GLRS or LFRS should be considered internal forces (e.g., unbalanced moments) and lateral deformation generated in vicinity of slab joints render the system more susceptible to punching shear. ACI 318 (2005) allows the direct design method, equivalent frame method under gravity loads and allows the finite-element models, effective beam width models, and equivalent frame models under lateral loads. These analysis methods can produce widely different result, and each has advantage and disadvantages. Thus, it is sometimes difficult for a designer to select an appropriate analysis method and interpret the results for design purposes. This study is to help designer selecting analysis method for flat plate system and to verify practicality of the modified equivalent frame method under lateral loads. This study compared internal force and drift obtained from frame methods with those obtained from finite element method under gravity and lateral loads. For this purposes, 7 story building is considered. Also, the accuracy of these models is verified by comparing analysis results using frame methods with published experimental results of NRC slab.

• Proceedings of the KIEE Conference
• /
• 2004.07c
• /
• pp.1591-1593
• /
• 2004

압력센서는 몇 가지 센싱 메카니즘을 가지고 있으므로 종류가 다양하고 크기 변에서도 여러 가지가 이용되고 있다. 최근에는 센싱 부분이 작으며 제어부분도 포함되는 ASIC화된 센서 시스템이 개발되고 있다. 여기에 이용되는 대부분의 탄성물질은 힘을 받았을 때 물질 내부의 벌크에서 저항 값이 변화하는 특성을 갖고 있다. 이러한 특성은 피에조 저항률(piezoresistivity)로 언급되며 스트레인 게이지의 감도에 영향을 주는 중요한 요소로 작용한다. 다이어프램으로 금속대선 세라믹을 사용하면 안정성이 우수한 특정을 가칠 수 있으며, 부식성 가스 류 및 화학성분에 대해서 내성이 강하고 환경변화에 따른 변형과 공정의 단순화 등 우수한 특성을 갖고 있는 것이 큰 장점이다. 센싱부는 산화 루세니움($RuO_2$)을 주 성분으로 하는 분말을 Paste화 하여 다이어프램 위에 스크린 프린팅을 하여 기본성능을 나타내었으며 특히, 상품화에서 중요한 일반성능에서는 온도 특성에 대한 Span 과 Offset 그리고 공정의 단순화에 대해서 고찰을 하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.457-463
• /
• 2009

식생만으로 제방을 보호하는 식생호안이 충분한 수리적 안정성을 확보할 수 있으면 생태적 건전성을 확보할 수 있음은 물론 호안을 건설하는 비용을 절감할 수 있을 것이다. 본 연구는 이러한 필요성에 따라 식생의 뿌리가 호안의 수리적 안정에 미치는 영향을 분석하였다. 이를 위해 하천의 수변부에 서식하는 초본식생에 대하여 식생이 외력에 저항하는 저항특성을 파악하고자 인발시험을 실시하였다. 식생의 뿌리는 외력으로 작용하는 하천수의 흐름에 대해 저항하고, 하천사면의 토양을 조정시켜 사면을 안정화시키는 역할을 하고 있다. 현장인발시험은 광주광역시 황룡강 및 광주천 일대의 4개 지역에서 총 6종 27개 개체에 대해 수행하였으며, 휴대용 Pushpull-Gauge를 이용하여 식생의 뿌리가 뽑힐 때까지의 최대인발력을 측정하였다. 측정된 최대인발력에서 토양의 무게를 제거한 뿌리만의 순수인발력을 산출하였으며, 이를 이용하여 인발강도를 계산하였다. 인발강도에 영향을 미치는 요소로서 식생뿌리체적을 선정하여 체적과 인발강도의 관계를 분석하였다. 분석결과 뿌리의 체적이 증가할수록 인발강도가 비례적으로 증가하는 것으로 나타났다.

• Journal of Advanced Navigation Technology
• /
• v.3 no.2
• /
• pp.147-155
• /
• 1999

In this work variations of orbital parameters are derived from the perturbation equations under Earth oblateness and atmospheric drag. A simple and effective scheme is proposed to compute the required delta v and fuel consumption to compensate for atmospheric drag. The scheme is applied to KOMPSAT example.

• Proceedings of the KIEE Conference
• /
• 2009.04a
• /
• pp.172-173
• /
• 2009

최근의 가정용 전기 설비의 경우 다양화, 첨단화 되면서 과거에는 예상치 못했던 재해들이 발생하여 기존의 설비에 영향을 주는 경우가 생겨난다. 특히 누전 차단기의 경우 고조파, 대지 정전용량 등에 의하여 오동작 요소로 작용하고 있으며, 이를 해결하기 위한 방법으로 저항성 누설 전류에 대한 분석이 필요하며 이를 위하여 전압 위상과 전류 위상, 누설 전류 위상을 검출하여 비교함으로써 순수 저항성 누설 전류와 용량성 누설전류에 대한 분석을 검출 모니터링하여 비전문가 집단인 수용가 특히 가정에서 보다 안전한 전기사용과 관리에 활용 하고자한다.

• Economic and Environmental Geology
• /
• v.21 no.1
• /
• pp.107-113
• /
• 1988

We present a precedure for interpreting dipole-dipole apparent resistivity data. The procedure is constructed by combining a forward two-dimensional finite element modeling and an inverse technique with Householder's transformation. In the interpretation, subsurface structure is divided into some blocks with constant resistivities. Our inversion technique is tested on synthetic and field data. We found that geologic constraint is required for successful interpretation.

• Korean Journal Plant Pathology
• /
• v.13 no.2
• /
• pp.85-89
• /
• 1997

Etiological components of the rice cultivars possessing durable resistance to rice blast were evaluated. In the greenhouse test by artificial inoculation, number of leaf blast lesion in Dongjinbyeo was not increased by any race of the pathogen, while the lesion number on the resistant cultivar Palgongbyeo and susceptible cultivar Jinmibyeo was increased rapidly. Size of the lesion in Dongjinbyeo was smaller and progressed more slowly than the resistant cultivar Palgongbyeo until 11 days after inoculation. Latent period in Dongjinbyeo was intermediate. However, the period was significantly variable depending upon the races. Least amount of conidia was produced in Dongjinbyeo by race KJ-107 and the number of conidia was decreased rapidly from 11 days after inoculation.