• Journal of Korean Society of Forest Science
• /
• v.32 no.1
• /
• pp.21-28
• /
• 1976

This paper reports on seasonal variation of tannin, catechol tannin, pyrogallol tannin, sugar, starch and protein contained in new shoots of four races of Castanea crenata in relation to their resistance to gall-wasps. The four races were Ginyose, Shimokatsugi, Taisyo-wase and Tsuguba. 1. Tannin contents showed the lowest level during June and September, and they gradually increased afterwards. Generally tannin contents were higher in gall-wasp resistant races than in its susceptible races. Mean annual tannin contents were 0.73%, 0.845%, 0.507%, and 0.520%, respectively, in Tsuguba, Ginyose, Shimokatsugi and Taisyo-wase. 2. Catechol tannin contents did not change from February to October, however, increased after that period. Catechol tannin contents in gall-wasp resistant races (Tsuguba and Ginyose) more than doubled those in the susceptible races (Shimokatsugi and Taisyo-wase) all the year round, indicating that there may be a correlation between quantitative differences in catechol tannin and the resistance to gall-wasps. 3. Pyrogallol tannin contents were rather lower in the gall-wasp resistant races than in the susceptible races on the contrary to the above results. 4. Seasonal variation of sugar contents showed similar tendency with catechol tannin. Gall-wasp resistant races contained higher sugar contents than those susceptible races. 5. Starch contents were significantly higher during dormant period. Gall-wasp susceptible races showed higher starch contents than the resistant races did, however, this tendency varied with season. 6. There were not significant differences in protein between races but there was a tendency of higher protein in gall-wasp susceptible races. The seasonal change of protein was similar to that of starch. 7. From the above results it seems that seasonal variation of contents of tannin, catechol and pyrogallol tannin, sugar, starch and protein in new shoots of chestnut trees have some relation to their resistance to gall-wasp.

• Journal of the Korean Magnetics Society
• /
• v.12 no.6
• /
• pp.212-217
• /
• 2002

The pseudo spin valve with a structure of Tl/CoFe(t $\AA$)/Cu(30 $\AA$)/NiFe(50 $\AA$)/Ta, showing giant magnetoresistance properties by utilizing coercivity difference between only two soft ferromagnetic layers were produced by d.c UHV magnetron sputtering system. In pseudo spin valve Ta/CoFe/Cu/NiFe/Ta, the magnetic and magnetoresistance properties with change of CoFe thickness were investigated. When the thickness of CoFe was 60 $\AA$, a typical MR curve of pseudo spin valve structure was obtained, showing MR ratio of 3.8 cio and the coercivity difference of 27.4 Oe with a sharp change of hard layer switching. When the CoFe thickness was varied from 20 to 100 $\AA$, coercivity difference between two layers was increased to 40 $\AA$. and decreased to 100 $\AA$ gradually. It is thought the change in coercivity of hard layer was due to the crystallinity and magnetostriction of thin CoFe layer. In order to improve the MR property in CoFe/Cu/NiFe trier layer structure, CoFe layer with change of 2-20 $\AA$ thick was inserted between Cu and NiFe. When the thickness of CoFe was 10 $\AA$, MR ratio was 6.7％, showing excellent MR property. This indicates 50 ％ higher than that of CoFe/Cu/NiFe pseudo spin valve.

• Journal of the Korean Magnetics Society
• /
• v.17 no.2
• /
• pp.95-98
• /
• 2007

In this paper, the magnetic properties and the annealing behavior of spin valve structures with Mo(MoN) underlayers were studied for various underlayer thickness. The spin valve structure was Si substrate/Mo(MoN)$(t{\AA})/NiFe(21{\AA})/CoFe(28{\AA})/Cu(22{\AA})/CoFe(18{\AA})/IrMn(65{\AA})/Ta(25 {\AA})$. Mo and MoN films were deposited on Si substrates and their thermal annealing behavior was analyzed. The deposition rate of the MoN thin film was decreased and tile resistivity of the MoN thin films were increased as the $N_2$ gas flow was increased. The variations of MR ratio and magnetic exchange coupling field of spin valve structure were smaller with MoN underlayers than that with Mo underlayers up to thickness of $51{\AA}$. MR ratio of spin valves with Mo underlayers was 2.86% at room temperature and increased up to 2.91 % after annealing at $200^{\circ}C$. Upon annealing at $300^{\circ}C$, the MR ratio decreased about 2.16%. The MR ratio of spin valves structure with MoN underlayers for $N_2$ gas flow 1 sccm was 5.27% at room temperature and increased up to 5.56% after annealing at $200^{\circ}C$. Upon annealing at $300^{\circ}C$, the MR ratio decreased about 4.9%.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.383-383
• /
• 2014

최근 디스플레이, 태양전지 그리고 touch screen panels 등 optoelectronic 장치의 시장이 성장함에 따라 투명전극의 수요가 증가하고 있다. Indium tin oxide (ITO)의 좋은 특성 때문에 주로 투명전극에 많이 사용되고 있다. 그러나 화학적 안정성이 떨어지고, 휘어질 때 특성저하가 심하여 금속나노와이어, 탄소나노튜브, 전도성폴리머, 그리고 그래핀 등의 다른 투명전극의 연구가 활발히 진행되고 있다. 그 중에서 그래핀은 높은 전자 이동도(200000 cm2v-1s-1)와 휘어져도 전기적 크게 변하지 않는 특성 때문에 유망한 투명 전도성 전극 (Transparent Conductive Electrodes, TCEs)으로 연구되어왔다. 또한 다양한 속성 가운데, 높은 광 투과성은 그래핀의 가장 큰 장점이다 [1]. 최근, 화학 기상 증착 (Chemical Vapor Deposition, CVD) 등 다양한 제조 방법이 대량 생산을 위해 개발되었다. 그러나 이 방법은 비용이 많이 들며, 과정이 상당히 복잡하고 높은 온도 (${\sim}1000^{\circ}C$)를 필요로 한다. 따라서 용매 기반의 환원된 그래핀 산화물(Reduced Graphene Oxides, RGOs)이 최근 주목 받고 있다. 그러나 RGOs의 면저항이 높아 전극으로서 사용이 제한된다. 따라서 전기적 특성을 향상시키는 방법으로 단일 벽 탄소 나노튜브 (Single-Walled Carbon Nanotubes, SWNTs)를 혼합하거나 화학적 도핑을 통하여 면저항을 크게 향상시키는 연구가 활발히 진행되고 있다. 그러나 이런 화학적 도핑의 경우 박막이 공기 중에 직접 산소나 습기와 반응하여 전기적 특성이 저하되는 문제점을 가지고 있다 [2]. 이러한 문제를 해결하기 위해 AuCl3을 도핑한 박막에 내열성 및 내광성 등의 화학적 안정성이 뛰어난 PEDOT:PSS를 코팅하여 필름의 공기중의 노출을 막아 줌으로써 도핑의 안전성 및 전기적 특성을 최적화하였다. 본 연구에서는 간단한 dip-coating방법을 사용하여 4개의 RGO/SWNTs 박막을 흡착하였다. 다음으로 AuCl3를 도핑하여 면저항 $4.909K{\Omega}$, $4.381K{\Omega}$인 두 개의 샘플의 시간과 온도에 따른 면저항의 변화를 확인하였다. 그리고 필름의 도핑 안전성을 향상 시키기 위해 AuCl3를 도핑한 필름 위에 전도성 폴리머 PEDOT:PSS 코팅하여 면저항 $886.1{\Omega}$, $837.5{\Omega}$인 두 개의 샘플의 시간과 온도에 따른 면저항의 변화를 확인하였다. AuCl3 도핑된 필름의 경우 공기 중에 150시간 노출 시 72%의 면저항 증가가 발생하였지만 PEDOT:PSS가 코팅된 필름의 경우 5%의 면저항 증가가 나타나 확연한 차이를 보였다. 또한 AuCl3 도핑한 필름의 경우 $150^{\circ}C$에서 60시간동안 공기중에 노출되었을 때 525%의 면저항 증가가 발생하였지만 PEDOT:PSS가 코팅된 필름의 경우 58%의 면저항 증가를 나타내었다. 이것은 PEDOT:PSS가 passivation역할을 하여 필름이 공기에 노출된 부분을 막아주어 도핑된 필름의 면저항의 변화를 줄여 주었음을 알 수 있다.

• Korean Journal of Optics and Photonics
• /
• v.30 no.5
• /
• pp.193-196
• /
• 2019

The design and control of thermal flow is important for the operation of high-power laser diodes (LDs). It is necessary to analyze and improve the thermal bottleneck near the active layer of an LD. As the error in prediction of the thermal resistance of an LD is large, typically due to the hyperbolic increase and saturation to linear increase of the thermal resistance as a function of thickness, it is helpful to use a simple, modified divergence model for the improvement and optimization of thermal resistance. The characteristics of LDs are described quite well, in that the values for simulated thermal resistance curves and the thermal cross section followed are almost the same as the values from the model function. Also, the thermal-cross-section curve obtained by differentiating the thermal resistance is good for identifying thermal bottlenecks intuitively, and is also fitted quite well by the model proposed for both a typical LD structure and an improved LD with thin capping and high thermal conductivity.

• Journal of International Area Studies (JIAS)
• /
• v.15 no.1
• /
• pp.61-82
• /
• 2011

Public resistance is an essential factor of the democratization process. Due to this, public resistance has been recognized as an important element in discussing the democratization of China. Recently in China, and a new era of resistance especially the agrarian resistance has been being expanded. This paper identifies trends and characteristics of that. With searching changes in the relationship between the nation and the societies in China, we will check whether democratization can be built from the whole bottom of the nation's ideology or not. It is a paradox of china's economic growth that the peasant uprising increased is a factor to the growth. The farmers' smoldering discontent exploded with rage because rural communities have been forced to sacrifice during the growth. The authoritarian party-state system in China has been faced with the limits in calming the peasant revolt down with the traditional suppression and restriction. Even though the party-state system in China has accepted farmers' dissatisfaction somewhat, and it has tried to improve its image of a benevolent government and pursued buying stability strategy, the gap between urban and rural areas has been expanded in the sustainable economic development and modernization process, therefore the authorities could not soothe the farmers' sense of alienation. Accordingly, the peasant revolt has not flickered out easily, and has been getting uncontrolled across China. Resistance characteristics of Chinese farmers have also changed. In the past, they had been sporadic and indirect ways, whereas in recent years, they have changed into organized and active ways. Of course, it is generally evaluated that the party-state system has sustained a strong social control so far. Buying stability strategy has prevented farmers' complaints from spreading to a threat to its regime, because civil societies in rural areas have still weak foundations from being formed. The party-state system, because of tensions and conflicts, will control the growing powers of civil societies in rural areas with institutionalization of interaction between the nation and the societies, and they will induce street protests to legalized struggle for a while. However, the relationship between the state and the societies has already started new rearrangement, in terms of that the conflicts between the state and rural communities have continued, and the changes of resistance ways.

• Magazine of the Korea Concrete Institute
• /
• v.9 no.5
• /
• pp.149-155
• /
• 1997

고로슬래그 미분말을 사용한 콘크리트\ulcorner 수화속도가 느려 어린 재령시 동해의 영향을받기 쉽다. 본 연구에서는 고로슬래그 미분말을 사용한 콘크리트의 동결융해 저항성을 알아보기 위해 고로슬래그 미분말의 치환율과 물-결합재비를 변화시켜 제조한 콘크리트에 대해 동결융해시험을 실시하였다. 또한 동일한 치환율, 물-결합재비의 콘크리트에 AE제를 첨가시켜 동결융해 저항성의 개선효과를 알아보았다. 시험결과 고로슬래그 미분말의 치환율이 증가할수록 동결융해 저항성은 작게 나왔다. 또한 non-AE 콘크리트의 경우 물-결합재비가 51%, 45%일 때 내구성지수는 각각 2.4%, 40.0%이하로 매우 나쁘게 나타났으나, AE콘크리트의 경우 물 -결합재비가 45%와 51%인 콘크리트의 내구성지수는 각각 90.2% 80.9%이상으로 동결융해 저항성이 매우 우수하게 나타났다.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2009.10a
• /
• pp.415-417
• /
• 2009

3점 전위 강하법을 이용하여 접지 저항을 측정하는 방법은 접지 전극과 전류 전극 그리고 전위 전극의 이격 거리 영향 관계에 따라 그 정확성이 결정된다. 하지만 실체 접지 시설을 요하는 현장에서 접지 저항을 측정하기 위한 공간 확보가 어려워 각 전극들의 정확한 위치 선정이 여의치 않는 경우가 발생할 수 있다. 이에 본 논문에서는 전위 전극의 이탈 범위와 접지 전극으로부터의 이격 거리에 따른 접지 저항 값의 오차를 측정하여 각각의 경우에 대해 통상적인 접지 저항 측정 방법에 의한 측정값과의 오차 범위를 분석해본다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.777-780
• /
• 2009

본 연구에서는 연료전지에의 응용을 위한 저가격의 무산소, 상온동작 가능한 센서구조를 설계, 제작하고 특성을 평가하였다. 연료전지의 수소 농도를 측정하기 위해서는 50ppm에서 5% 이상까지 넓은 범위를 감지할 수 있는 수소센서의 성능이 매우 중요하다. 이러한 특성과 상용화를 위해 가격 경쟁력을 갖는 수소센서로서, 수소흡착에 따른 Pd의 저항변화 특성을 이용한 센서 구조에 대하여 연구하였다. 높은 저항치를 갖는 Pd 후막 구조설계를 통하여 저항 감소형의 센서를 제작하여 특성평가를 하였다. 저가형으로 설계 제작된 Pd 수소센서는 50~20000ppm 범위에서 감지특성을 나타내었으며, 약 40sec의 응답속도를 보였다.

• 한국해양학회지
• /
• v.23 no.3
• /
• pp.146-157
• /
• 1988

Properties of porosity, compressional wave velocity, velocity anisotropy, electrical resistivity, and resistivity anisotropy are measured and calculated for two DSDP clay-rich hemipelagic sequences in the northwestern Pacific. Velocity and resistivity increase with burial depth at the expense of decreasing porosity. Profiles of velocity anisotropy and resistivity anisotropy show almost the same trend. Horizontally developed low aspect ratio pores may generate velocity and resistivity anisotropy. The preferred orientation of clay minerals is also believed to be responsible for the observed anisotropy.