• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.4A
• /
• pp.639-645
• /
• 2006

FRP (Fiber Reinforced Polymer) is an excellent new constructional material in resistibility to corrosion, high intensity, resistibility to fatigue, and plasticity. FBG (Fiber Bragg Grating) sensor is widely used at present as a smart sensor due to lots of advantages such as electric resistance, small-sized material, and high durability. However, with insufficiency of measuring displacement, FBG sensor is used only as a sensor measuring physical properties like strain or temperature. In this study, FRP and FBG sensors are to be hybridized, which could lead to the development of a smart FRP rod. Moreover, developing the estimated model for deflection with neural network method, with the data measured through FBG sensor, could make conquest of a disadvantage of FBG sensor - uniquely used for sensing strain. Artificial neural network is MLP (Multi-layer perceptron), trained within error rate of 0.001. Nonlinear object function and back-propagation algorithm is applied to training and this model is verified with the measured axial displacement through UTM and the estimated numerical values.

• The Journal of Engineering Geology
• /
• v.31 no.2
• /
• pp.187-197
• /
• 2021

Clay mineral content of weathered zone is a key parameter for landslide studies. Electrical resistivity tomography is usually performed to delineate the geometry of complex landslides and to identify the sliding surface. In clay-bearing weathered zone, parallel resistivity Archie equation is employed to investigate the effect of conductivity added (resistivity reduced) by clay minerals of kaolinite and montmorillonite, which is dependent on their specific surface area and cation exchange capacities (CEC). A decrease of overall resistivity and apparent formation factor is observed with increasing pore-water resistivity, significantly in montmorillonite. Formation factor is found decreased with increasing porosity and decreasing cementation factor. Parallel Archie equation was applied to the electrical resistivity data from the test area (Sinjindo-ri, Taean-gun, Chungcheongnam-do, Korea) which experienced land creeping in the year of 2014. A panel test with varying clay-mineral contents provides the best fit section when the theoretical section constructed with the assumed contents approaches the field section, from which the clay-mineral content of the weathered zone is estimated to be approximately 10%. Resistivity interpretation schemes including the clay mineral contents for land creeping studies explored in this paper can be challenged more when porosity, saturation, and pore-water resistivity are provided and they are included in the numerical resistivity modeling.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.24 no.4
• /
• pp.35-37
• /
• 1979

To investigate the genetic system in resistance to powdery mildew winter wheat cultivar Diplomat which has stable field resistance was crossed with high yielding susceptible winter type Caribo and Hayman's generation mean analysis technique was employed. Mildewing rate on flag-leaf at both heading-flowering and ripe stages were recorded according to lame's quantitative scale. The result indicated that additive gene effect was more important and significant role in the inheritance of resistance while dominant gene effect was minimum, and digenic interations were absent. Narrow sense heritability of resistance at ripe stage was higher than that of heading-flowering stage.

• Resources Recycling
• /
• v.19 no.4
• /
• pp.35-40
• /
• 2010

Existing porous concrete has problems with reduction of strength due to freezing and thawing and exfoliation of aggregate at joints. In this study, a method for increasing strength and durability of porous concrete by using fine aggregate, silica-fume and high-range water-reducing agent was proposed by laboratory tests. Mixing ratio between silica-fume (10%) and fine aggregate (0%, 7%, 15%) was selected as a major test factor, and laboratory tests for compressive strength, flexural strength, permeability coefficient, porosity, freezing and thawing were conducted. Compressive strength and flexural strength were increased as the mixing ratio of fine aggregate was increased. However, permeability and freezing-thawing resistance were decreased due to reduction of porosity. Therefore, the ratio of fine aggregate should be limited to increase strength and durability of the porous concrete, while the mixing ratio of silica-fume should be over 10%.

• Journal of Korean Society of Steel Construction
• /
• v.26 no.3
• /
• pp.205-217
• /
• 2014

In this study, flexural strength and ductility requirements of composite hybrid steel I-girder with its HSB(high performance steel for bridge) applied to tension flanges are examined in positive bending. In AASHTO LRFD specification, flexural strength and ductility requirements of composite I-girder in positive bending are specified in terms of plastic moment and plastic neutral axis that are derived from plastic behavior of conventional steel. However, plastic zone cannot be defined clearly from the stress-strain behavior of HSB unlike the behavior of conventional steel. Therefore, through idealized stress-strain curves of HSB, the plastic moment of composite hybrid steel I-girder with its HSB applied to tension flanges is defined by assuming the plastic zone of HSB. By using the consequences of numerical analysis regarding arbitrary cross-sections that have various dimensions, ductility requirements and flexural strength of composite hybrid I-girder with its HSB applied to tension flange are proposed.

• Journal of the Society of Disaster Information
• /
• v.9 no.4
• /
• pp.469-475
• /
• 2013

The purpose of this experimental research is to estimate compressive strength and resistance to freezing and thawing of recycled aggregate concrete containing ground granulated blast furnace slag. For this purpose, concrete specimens according to substitution ratio of recycled aggregate were made for different replacement ratio of ground granulated blast furnace slag(GGBFS), and then compressive strength and resistance to freezing and thawing were evaluated for those. It was observed from the test results that compressive strength at 28 days of recycled aggregate concrete containing GGBFS of 20% was much more excellent than plain concrete and when air content of concrete was maintained 4 to 6%, influence of substitution ratio of recycled aggregate and replacement ratio of GGBFS on resistance to freezing and thawing was little up to 300 cycles of freezing and thawing.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.14 no.3
• /
• pp.25-31
• /
• 1977

Fe V spinels were prepared by sintering the well-ground stoichiometric mixtures of Fe O and V O at 1,10$0^{\circ}C$ under H -CO atmosphere. The activation energy for electrical conduction decreases with increasing amount of iron. The tendency of activation energy depending on the amount of iron contained clarifies that the electrical condction of the spinel is mainly due to electron hopping between Fe and Fe ions at B sites. In the experiment for negative resistance characteristics, the threshold voltage (Vth) for the samples is related to ambient temperature, thickness and raising rate of applied voltage. Vth decreases as temperature increases while Vth increases linearly with thickness and Vth increases linearly with the raising rate of applied voltage in semi-logarithmic scale. These results lead to a conclusion that current paths mainly formed by thermal breakdown are ascribed to the negative resistance phenomena. Applying this property, these vanadium iron spinels may be used for switching elements.

• Journal of the Microelectronics and Packaging Society
• /
• v.26 no.4
• /
• pp.47-53
• /
• 2019

Stiffness-gradient stretchable electronic packages of the soft PDMS/hard PDMS/PTFE structure were processed using the polydimethylsiloxane (PDMS) as the base substrate and the more stiff polytetrafluoroethylene (PTFE) as the island substrate, and their stretchable deformation-resistance characteristics were characterized. The flip-chip joints, formed by bonding the chip bumps of 50 ㎛-diameter onto the PDMS/PTFE substrate pads, exhibited an average contact resistance of 96 mΩ. When the stretchable package of the soft PDMS/hard PDMS/PTFE structure was deformed to 30% elongation, the strain on the PTFE was restrained to 1%, resulting in a negligible resistance increase of 1% in the daisy-chain circuit formed on the PTFE island substrate. The circuit resistance increased for 1.7% after 2,500 cycles of 0~30% stretchable deformation.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.1
• /
• pp.215-225
• /
• 2011

Metakaolin is a dehydroxylated form of the clay mineral kaolinite. Rocks that are rich in kaolinite are known as china clay or kaolin, traditionally used in the manufacture of porcelain. The particle size of metakaolin is smaller than cement particles, but not as fine as silica fume. This paper investigates the effect of the concrete containing metakaolin as a mineral admixture on the compressive strength and resistance properties to chloride ion penetration. In this study, the experiment was carried out to investigate and analyze the influence of replacement ratio of metakaolin and micro silica fume on the compressive strength and chlorine ion penetration resistance of concrete. All levels were water/binder ratio 30%, replacement ratio of metakaolin and silica fume were 0, 5, 10, 15, 20% respectively. The compressive strength of concrete using metakaolin tends to increase, as the replacement ratio increases but the chlorine ion penetration resistance was not so as lager as silica fume concrete. Therefore, the optimum mixing ratio of metakaoline to satisfy a properties of compressive strength and chlorine ion penetration resistance was was approximately10%.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.148-148
• /
• 2009

반도체 소자의 크기가 45 nm 이하로 감소함에 따라 최소 선폭에 따른 다층 배선 연결 구조가 요구되고 있다. 그러나 고집적화 구조는 기생 저항과 정전 용량에 의한 신호지연증가 및 혼선 전력 소모의 문제가 발생한다. 이런 문제를 해결하기 위한 방법 중의 하나는 저저항 배선연결물질과 층간 절연막으로 저유전 상수를 갖는 물질을 사용하는 것이다. 본 연구는 DEMS $(H-Si(CH_3)(OC_2H_5)_2)$ 전구체를 이용하여 저유전막을 증착할 때 사용되는 PECVD (plasma enhanced chemical vapor deposition) 장비를 국내 기술로 개발하고 개발된 장비로 저유전박막을 평가한 것에 관한 것이다. 본 연구에서 평가 및 박막 종확 시 사용한 장비는 MAHA hp 1 type ((주)아토)로서 양산용 PECVD 장비이다. 변수는 C-He의 유랑, 300 mm Si 웨이퍼와 shower head 사이의 거리, 증착 압력, 구동 전력이고, 증착된 저유전막의 두께, 두께의 균일성, 굴절률, 굴절률의 균일성를 평가하였다. 구동 전력이 500W 일 때, C-He의 유량과 진공의 크기를 감소시키면 박막의 두께가 감소하고 박막의 균일성은 증가하였다. C-He의 유량을 증가시키고 shower head 와 Si 웨이퍼 사이의 거리 및 구동 압력을 감소시키면 굴절률과 굴절률의 균일성이 모두 저하되었다. 구동 전력이 700W 일 때, 박막 두께의 경우, 구동 전력이 500W 일 때의 결과와 유사하지만, 박막의 균일성, 굴절률, 굴절률의 균일성은 모든 조건에서 저하되었다.