• 한국공작기계학회논문집
• /
• 제12권3호
• /
• pp.17-24
• /
• 2003

One of the most important performance criteria related to the gain tuning of controller for CNC machining center is the contour error. This study analyzed circular error by the axis-matched and mismatched cases. To reduce ellipse and radius error, it is necessary to set the gain for each axis to be same bandwidth and high response. Based on the analysis in the frequency domain, we simulate feed system by mathematical model and then predict bandwidth of each axis. For analysis of structure vibration while the each axis is moving, we try the various of measuring method and position loop is improved by jerk limit.

• 한국공작기계학회논문집
• /
• 제13권6호
• /
• pp.56-63
• /
• 2004

The real-time NURBS interpolation method using 2-stage interpolation is studied. The 2-stage interpolation method that compensates for interpolation errors within machine BLU is proposed. The interpolation result was filtered by an Acceleration/Jerk limitation equation. Through this 2-stage interpolation, both the interpolation error condition and the motion kinematics could be satisfied. Using computer simulation in which interpolation results are evaluated by a numerical iteration method, it is shown that the 2-stage interpolation algerian could interpolate target curves precisely with geometric and dynamic contentment. The proposed algorithm was implemented in the CNC simulator system and an experimental un was conducted to identify the real-time adaptation.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.457-458
• /
• 2006

A method for obtaining smooth, jerk bounded feed rate profile in high speed machining has been developed. This study proposes a NURBS interpolator based on adaptive feed rate control with a well developed look ahead algorithm which takes into account the machining dynamics as well. Limitation of jerk and proportional torque rate result in smoothened loads on the machine which effectively reduces excitation of the resonant frequencies of the machine. It is found that the values of the feed rate of the down stream sharp corner have profound effect on the feed rate of the upstream sharp corners. By using a windowing scheme the feed rate profile obtained after look ahead method is re-interpolated to reduce the jerk related problems. This is compared with the adaptive NURBS interpolator to show the effectiveness of the proposed method. Simulation results indicate that the consideration of 'ripple effect' is important in avoiding jerk and thereby increasing the machining accuracy.

• 대한전기학회논문지
• /
• 제38권12호
• /
• pp.995-1006
• /
• 1989

로보트 매니퓰레이터가 컨베이어 상의 파트를 추적 하면서 작업을 수행하는 것은 작업 효율의 증가에 크게 기여한다. 본 논문은 컨베이어 상의 파트를 추적하기 위한 로보트 매니퓰레이터의 동작계획 알고리즘을 제안한다. 로보트 매니퓰레이터의 추적 동작은 밸트의 속도, 추적 시작 시간에서의 파트와 로보트 핸드의 위체이 의하여 결정된다. 이때 토크 및 관절 속도, 관절 가속도, 관절 저크의 제한범위가 모두 고려되며, 최소의 정착시간을 갖는 추적 궤적이 생성된다. 추적 해는 linearr quadratic tracking문제로 접근하여 구한다. 로보트매니퓰레이터의 동적 방정식은 파라메터의 함수 성능 지수를 최소화 하는 동적 방정식의 해는 동적 계획법에 의하여 구한다. ${\mu}-VAX_@$에 의한 시뮬레이션 결과를 제시한다.