• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.8
• /
• pp.1094-1099
• /
• 2012

This study investigated the effect of a long-term high-fat diet on energy metabolic substrate utilization in resting rats in order to revalue source fat energy efficiency during a high-fat diet and its effect on energy expenditure and body fat accumulation. Sprague-Dawley male rats at 4 weeks of age were bought from Orient Bio Con. The rats were divided into a control (CON) group and a high-fat diet (HF) group. Rats ate a high-fat diet (w/w 40%, kcal/kcal 64.9%) ad libitum for 5 weeks. Food intake and body weight were measured every day at 09:00 throughout the experimental period. Energy expenditure was measured using an animal energy metabolism chamber after 4 weeks. The final body weight did not change between the CON and HF groups, but caloric intake was significantly higher in the HF group than in the CON group (p<0.05). There was no difference between the groups in oxygen uptake, however carbon dioxide production was significantly higher in the HF group. Also, the respiratory exchange ratio was higher in the HF group. Carbohydrate oxidation was lower in the HF group than in the CON group, but fat oxidation in the HF group was greater. These results mean that energy substrate oxidation at rest is affected by diet composition, especially dietary fat content. Abdominal fat fad weights were significantly higher by 33% in the HF group than in the CON group even though the calorie intake in the HF group was higher by 6%. These results suggested that the dietary fat calorie value might have a higher Atwater value of 9 kcal/g, which mean that dietary fat calorie values could be reconsidered in body weight control scenarios such as which the obese or weight class athletes.

• Journal of Animal Science and Technology
• /
• v.48 no.3
• /
• pp.479-486
• /
• 2006

The current study was conducted to examine the effect of feeding and management practices on milk quality and dairy farm productivity in Korea. Fifty dairy farms in Gyunggi (11), Gangwon (22), Chungnam (17) provinces were surveyed to collect data on the herd size, housing style, feeding management, waste disposal, milking practices and milk yield. Milk tank samples from all farms under study were also collected to enumerate its composition and quality parameters. Large dairy herds are equiped with better housing, milking and waste control facilities than medium and small dairy herds. Higher concentrate feeding to lactating cows was noticed in small dairy herds (47.51 %) than in medium (32.59 %) and large dairy herds (31.82 %). The decrease in concentrate feeding to lactating cows with increase in number of cows per farm resulted in a simultaneous increase in the use of imported forages. Bacterial count in milk was affected by housing and milking facilities at dairy farms. Higher bacterial counts (Coliform and E. coli) in milk were observed in cows housed in stanchion than those under free stall with saw dust bedding. The bacterial counts were higher with bucket milking system than with pipe-line and parlour systems. The increase in the number of dairy cows per farm and thus better management and milking facilities resulted in a reduction in somatic cell score. Milk yield (per cow) was higher in herds with less somatic cell score. Average milk protein concentration was between 2.89 to 2.98 % and milk urea nitrogen was between 21.81 to 23.31mg/ml on surveyed dairy farms. This study concluded that large herd size with better dairy cow management facilities is crucial to produce quality milk with better dairy farm income.

• Journal of radiological science and technology
• /
• v.29 no.4
• /
• pp.241-247
• /
• 2006

Recently, interests and utilization on Computed Radiography(CR) and Digital Radiography(DR) tends to increase owing to an introduction of Picture Archiving and Communication System(PACS) and an accuracy control of special medical equipment for a breast imaging examination. This study was intended to compare and analyze a detector's imaging quality by each system to be used for the breast imaging examination by using ACR Phantom used at the accuracy control. As an evaluation method, a significance and reliability of image's value using the ACR Phantom was analyzed by using SPSS program. The results are followed. 1. For the fiber, there was 3.9 score in Screen-Film, 4.2 score in CR($50{\mu}m$), 3.2 score in CR($100{\mu}m$), and 4.2 score in DR. There was the high score in the order of CR($50{\mu}m$), DR, Screen-Film, and CR($100{\mu}m$)(P<0.05). 2. For the calcification, there was 2.7 score in Screen-Film, 2.5 score in CR($50{\mu}m$), 2.0 score in CR($100{\mu}m$), and 2.9 score in DR. There was the high score in the order of DR, Screen-Film, CR($50{\mu}m$), and CR($100{\mu}m$).(0.025(P<0.05). 3. For Mass, there was 3.8 score in Screen-Film, 3.8 score in CR($50{\mu}m$), 3.6 score in CR($100{\mu}m$), and 4.5 score in DR. There was the high score in the order of DR, CR($50{\mu}m$), Screen-Film, and CR($100{\mu}m$) (P<0.1). 4. As the total score, there was 10.4 score in Screen-Film, 10.6 score in CR($50{\mu}m$), 8.7 score in CR($100{\mu}m$), and 11.3 score in DR. There was the high score in the order of DR, $CR(50{\mu}m$), Screen-Film, and $CR(100{\mu}m$). As shown in the above results, it can be known that DR and Screen-Film System has higher image quality than CR. But, DR has unstability caused by element, and Screen-Film has the low image quality caused by artifact as disadvantages. When Dual-Side CR($50{\mu}m$) was used among CR systems which had the problem of low image quality, it was indicated that there was no difference with Screen-Film System. Because the radiation imaging examination tends to become digitalized, each system for the breast imaging examination will need to be developed and supplemented.

• The Korean Journal of Food And Nutrition
• /
• v.18 no.3
• /
• pp.207-218
• /
• 2005

In room temperature, Kimchi becomes acidified and a little decayed, scenting a bad smell, and It couldn't be well kept. But if it should be made into a pill, it could be preserved for a long time for marketing, with nutrition highly concentrated as well as with no scent. Therefore, making Kimchi into a pill needs drying. When dried Kimchi, lactic acid and fragrant ingredient will vanish along with volatilization. The cyclodextrin(CD) as a stabilizer shows that the protecting rate of volatility of lactic acid in Kimchi is higher before than that of after fermentation, and it is higher at the addition $2\%\;than\;of\;1\%$ in case of Kimchi with CD. But it doesn't give much effect on total sugar, reducing sugar, protein and amino acid. Evaporation rate of lactic acid is the least in freeze dry, and natural dry, heat dry come next, respectively. In heat dry, if dried at more than $60^{\circ}C$ for a long time, Kimchi exudes boiling and scorched scent, causing bitter taste. The result of HPLC with superose 12 column at 280nm and 210nm shows that place and amount of main peak is almost the same, but the distribution of other peaks are different, with the revelation of various peaks like peptide and amino acid. The Kimchi pill made by the addition of $1\%$ CD shows that concentration is eight times higher than general Kimchi, total sugar is $14.4\%$, reducing sugar is $8.8\%$, protein is $4.8\%$, amino acid is $2.4\%$, and other contents are $74.4\%$, acidity is 32.8, and pH is 3.5 each. The result of letting 20 people with obesity, 20 patients with constipation have 30 pills(total weight 30g) three times a day for 60 days reveals they lost $2.29\%$ in weight on the average, and 7 among 20 were all relieved in constipation, and 8 responded that they experienced its efficacy.

• Korean Journal of Food Science and Technology
• /
• v.30 no.5
• /
• pp.1229-1235
• /
• 1998

To see the correlation between the rate of in vitro starch hydrolysis and the glycemic index, an in vitro digestion was carried out by incubating the cereal samples for 2 hours with ${\alpha}-amylase$ in dialysis tubing. Also the levels of blood glucose were measured over 2 hours after feeding healthy volunteers with 50 g carbohydrate portions. Hydrolysis area, hydrolysis index (HI) and the dialysate content of carbohydrate throughout the digestion time for barley was significantly below those for other cereals (p<0.05), and unpolished glutinous rice was significantly above (p<0.05). The GI-glucose of barley $(57%{\pm}7)$ to glucose as standard was significantly (p<0.05) lower than those of other cereals whereas the GI-glucose of glutinous rice $(110%{\pm}8)$ was significantly higher (p<0.05) than other cereals. The GI-rice values to rice as standard were $122%{\pm}4$ for glutinous sorghum, $116%{\pm}13$ for job's tear, $115%{\pm}13$ for glutinous millet, $106%{\pm}6$ for unpolished glutinous rice, $102%{\pm}7$ for glutinous rice, $100%{\pm}0$ for rice, $90%{\pm}12$ for unpolished rice, $85%{\pm}6$ for foxtail millet, $79%{\pm}5$ for buckwheat and $63%{\pm}6$ for barley. The GI-rice was significantly correlated to hydrolysis area and HI (r=0.75, p<0.01). It suggests that the in vitro starch hydrolysis offers good potential to predict the in vivo glycemic response of starch foods.

• Korean Journal of Medicinal Crop Science
• /
• v.6 no.4
• /
• pp.258-264
• /
• 1998

This study was conducted to establish mass propagation system from seeds of Lavandula angustiolia Mill. Only 4% of dry seeds were germinated when they were incubated in $4^{\circ}C$. Germination rate of stratified seeds for 9 weeks was 15% higher in light than darkness. Soaking with 1000mg/l of $GA_3$ was helpful to overcome the effect of darkness. The optimal temperature for germination was $25^{\circ}C$ for the seeds that were treated with$GA_3$, solution. For the improvement of germination rates, pretreatment of $GA_3$ at 500-2000mg/l showed about 75% of germination, and in the combination treatment of $GA_3$, and BA, germination rate increased by about 10% in the treatment of 1000mg/l $GA_3+10mg/l$ BA compared with the 1000mg/l $GA_3$ treatment. Cold stratification treatment was very effective for seed germination, and over 70% of seeds were germinated when they were incubated in $4^{\circ}C$ for 9-12 weeks. In addition, there was synergic effect on the seed germination subject to stratification and 1000mg/l $GA_3$, treatment for 6 months. In the mixture of vermiculite: peatmoss (1 : 1, v/v), emergence rate was 6.7% in control and 65% in 1000mg/l $GA_3$ treatment, respectively.

• The Korean Journal of Food And Nutrition
• /
• v.14 no.5
• /
• pp.457-466
• /
• 2001

In this study. HACCP system was applied to improve the quality of instant ablactation baby food with rising sanitary problem among SunSig(powder of roasted grains and vegetables) . It took about 9min 30 second to produce and the temperature status of raw materials were 30.9∼31.8$\^{C}$. Raw material and production phase goods had average 6.2 in pH and 0.23∼0.63 in water activity. The average number of total aerobic bacteria(TAB) and coliform were 1.4$\times$10$^4$ CFU/g, 5.5$\times$10 CFU/g in raw materials. And the number became 8.7$\times$10$^2$ CFU/g, 6.9$\times$10 CFU/g after 1st grinding step. The distributions of TAB and coliform in equipments were 3.8$\times$10$^4$ CFU/㎠, 8.0$\times$10 CFU/㎠ on the average. According to storage temperature, variations of number of TAB coliform were slight at 4$\^{C}$ but increased at 20$\^{C}$ and 30$\^{C}$ . Therefore following subjects can be issued on the basis of results. Minimize the storage time and keep at cool temperature. 1st and 2nd grinders should be managed hygienically. Establish the heating step during the production of instant action baby food. Instant ablactation baby food produced should be stored at cool and freeze condition.

• Applied Chemistry for Engineering
• /
• v.28 no.1
• /
• pp.101-111
• /
• 2017

Mineral carbonation is a technology in which carbonates are synthesized from minerals including serpentine and olivine, and industrial wastes such as slag and cement, of which all contain calcium or magnesium when reacted with carbon dioxide. This study aims to develop the mineral carbonation technology for commercialization, which can reduce environmental burden and process cost through the reduction of carbon dioxide using steel slag and the slag reuse after calcium extraction. Calcium extraction was conducted using NH4Cl solution for air-cooled slag and convert slag, and ${\geq}98%$ purity calcium carbonate was synthesized by reaction with calcium-extracted solution and carbon dioxide. And we conducted experimentally to minimize the quantity of by-product, the slag residue after calcium extraction, which has occupied large amount of weight ratio (about 80-90%) at the point of mineral carbonation process using slag. The slag residue was used to replace silica sand in the manufacture of cement panel, and physical properties including compressive strength and flexible strength of panel using the slag residue and normal cement panel, respectively, were analyzed. The calcium concentration in extraction solution was analyzed by inductively coupled plasma optical emission spectrometer (ICP-OES). Field-emission scanning electron microscope (FE-SEM) was also used to identify the surface morphology of calcium carbonate, and XRD was used to analyze the crystallinity and the quantitative analysis of calcium carbonate. In addition, the cement panel evaluation was carried out according to KS L ISO 679, and the compressive strength and flexural strength of the panels were measured.

• Korean Journal of Food Science and Technology
• /
• v.7 no.1
• /
• pp.51-56
• /
• 1975

The effects of various concentration of NaCI, i.e., 1, 2, 2. 5, 3, and 4%, on the rancidity development of samples of Ramyon, deep-fried instant noodles, were studied. Dough for the samples, which was composed of wheat flour, distilled water, and pure NaCI, was prepared at a commercial plant but the deep-frying p개cess for the dough was performed in the laboratory. The products thus obtained were incubated for 50 days at $45.0{\pm}1.0^{\circ}C$. Peroxide and TBA values were determined every 5 days throughout the storage period. The results obtained are as follows. 1) Control and the samples containing 1, 2, 2. 5, and 3% salt had POVs of 8. 7, 9. 1, 9. 0, 9. 2 and 9. 7 respectively after 25 days. The control showed a POV of 19.1 after 45 days whereas the sample Ramyons containing 1, 2, 2. 5, 3, and 4% salt had POVs of 12. 6, 13. 2, 14. 6, 15. 3, and 15. 8 respectively after 30 days. 2) TBA values of Control and the sample containing 1, 2, 2. 5, 3, and 4% salt were 5. 8, 6. 1, 6. 2, 6. 4, 6. 7, and 6. 6 respectively after 15 days. But the control developed a TBA value of 11. 4 after 40 days. The samples containing 1, 2, 2. 5, and 3% salt showed TBA values of 10. 2, 14. 3, 15. 8, and 15. 3 respectively after 30 days whereas the sample containing 4% salt had a TBA value of 13. 8 after 25 days. 3) The relationship between the POVs and the TBA values was linear. However, the regression curves of the POVs and the TBA values indicated progressive increase in the gradients(POV/TBA) with increase in the salt content. 4) From the results of the present study, it was found that although the acceleration of rancidity was not in proportion to the amount of NaCI, definite progressive increase in the rancidity development was observed with increase in the salt content of the sample Ramyons.

• The Journal of Korean Academy of Prosthodontics
• /
• v.34 no.4
• /
• pp.791-799
• /
• 1996

The purpose of this study was to compare the shear bond strength of adhesion bridge by various resin cements. One hundred and foully 1st premolars were used. The teeth were cut below 2mm from CEJ and the coronal portions were used. The coronal portions were embeded with the acrylic resin and trimmed with sic paper until the flat plane with ${\phi}$ 4mm above acrylic resin sticks in height 5mm were casted with nonprecious metal and the using surfaces were treated with sic paper from #200 to #1200 and polished with alminum oxide paste. And then, the using surfaces were sandblasted and treated with the electrochemical etching. The teeth were divided into three groups of fourty two each. In group I, teeth and specimens were cemented with Panavia 21 In group II, teeth and specimens were cemented with Superbond In group I, teeth and specimens were cemented with All-Bond & composite resin cement Each group was subdivided into three subgroups according to the storage period ; one-day storage, fifteen-day storage, and thirty-day storage. The special jig was made. Then, the specimen and jig were mounted to Instron Universal Testing Machine and the failure were measured. The results were as follows. 1. There was statisfically significant difference between the failure loads of group I and group II and III after one day storage(P<0.01), 2. There was statisfically significant difference between the failure loads of group II and group I and III and between group I and group III at fifteen day storage(P<0.01). 3. There was statisfically significant difference between the failure loads of group I and II and group III after thirty day storage(P<0.01). 4. There was statisfically significant difference between the failure loads of one day storage and fifteen and thirty days storages in group III (P<0.01).