• 한국공작기계학회논문집
• /
• 제10권6호
• /
• pp.48-56
• /
• 2001

In this paper, this study aims at the evaluation on the characteristics of CFRP laminate plates using a falling weight impact tester. The experiment was conducted on several laminates of different orientation. A system was built far measur- ing the impact strength of CFRP laminates in consideration of stress wave propagation theory using a falling weight impact tester. Delamination areas of impacted specimens for the different ply orientation were measured with ultrasonic C- scanner to find correlation between impact energy and delamination area. Absorbed energy of quasi-isotropic specimen having flour interfaces was higher than that of orthotropic laminates with two interfaces. The more interfaces, the greater the energy absorbed. The absorbed energy oft hybrid specimen containing a GFRP layer was higher than that of normal specimens.

• 콘크리트학회논문집
• /
• 제24권3호
• /
• pp.293-303
• /
• 2012

최근 건설기술의 발전에 따라 구조물이 대형화, 고층화, 장대화되고 있으며, 동시에 다양한 기능을 수행하고 있다. 그러나 요즘 들어 그 빈도수가 증가하고 있는 충돌 사고나 테러에 의한 폭발, 화재 등에 의한 극한하중이 상기의 구조물에 작용할 경우, 구조물의 손상뿐만 아니라 인명과 재산의 피해 정도가 상당히 커질 수 있다. 특히, 충격이나 폭발하중은 구조물에 작용하는 압력 또는 하중이 매우 짧은 시간에 발생하게 되고, 이러한 하중을 받는 구조물은 준-정적(quasi-static) 하중을 받는 구조물과는 다른 응답을 나타내게 되며 반드시 변형률 속도와 손상 효과를 고려해서 설계가 이루어져야 한다. 그러므로 이 연구에서는 콘크리트 슬래브의 충격저항성능 향상을 위해서 강섬유를 전체 부피의 0%에서 1.5%까지 혼입하고, 두 가지 종류의 FRP 시트를 인장부에 보강하여 저속 충격하중에서의 휨 실험을 수행하였다. 실험 결과 FRP 시트를 인장부에 보강할 경우에 최대 충격하중 및 소산에너지, 파괴 시의 타격 횟수가 증가하였으며, 최대 처짐 및 회전각은 감소하여 충격저항성능이 크게 향상되는 것으로 나타났다. 이러한 결과는 추후 극한하중에 노출될 수 있는 주요 시설물의 설계 시 유용하게 사용될 수 있을 것으로 판단된다. 또한, 이 논문에서는 두 가지 종류의 FRP 시트로 보강된 강섬유 보강 콘크리트 슬래브의 저속 충격하중에서의 동적응답을 해석하기 위하여 외연적 시간적분에 기초한 유한요소해석 프로그램인 LS-DYNA를 사용하였으며, 해석 결과 오차율 5% 이내로 비교적 정확하게 최대 처짐을 예측하는 것으로 나타났다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 추계학술발표대회 논문집
• /
• pp.174-178
• /
• 2001

The piezoelectric thin film sensor can be used to interpret variations in structural and material properties, e.g. for structural integrity monitoring and assessment. To illustrate one of this potential benefit, PVDF film sensors are used for monitoring impact damage initiation in Gr/Ep composite panel. Both PVDF film sensors and strain gages are surface mounted to the Gr/Ep specimens. A series of impact test at various impact energy by changing impact mass and height is performed on the instrumented drop weight impact tester. The sensor responses are carefully examined to predict the onset of impact damage such as matrix cracking, delamination, and fiber breakage, etc. Test results show that the particular waveforms of sensor signals implying the damage initiation and development are detected above the damage initiation impact energy. As expected, the PVDF film sensor is found to be more sensitive to impact damage initiation event than the strain gage.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2011년도 춘계학술논문집 2부
• /
• pp.844-846
• /
• 2011

충돌에서의 차체 손상과 충돌 성능 강화를 위하여 최근 크래쉬 영역의 개념이 설계개념에 도입되고 있다. 대표적인 예가 범퍼와 차체사이의 크래쉬 박스로 저속충돌시 충격에너지를 흡수하여 범퍼이후 차체에 에너지를 저감시켜 차량의 안전성 및 수리비 저감 등에 있어서도 매우 효과적인 역할을 하는 부품으로 이에 대한 개발을 위해 많은 연구들이 진행되고 있다. 본 논문에서는 충돌에너지 흡수성능이 우수한 크래쉬박스에 알루미늄 폼을 적용하였을 때 충돌에너지 흡수 및 거동에 대하여 충돌해석을 수행하였다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2003년도 추계학술발표대회 논문집
• /
• pp.158-162
• /
• 2003

The PVDF(polyvinylidene fluoride) film sensor as one of smart sensors has good characteristics to detect the impact damages of composite structures. The capabilities of the PVDF film sensor for evaluating impact behaviors and damages of Gr/Ep laminates subjected to low-velocity impact were examined. From sensor signals, the specific wave-forms implying the damage were detected. The wavelet transform(WT) and Short Time Fourier Transform(STFT) were used to decompose the piezoelectric sensor signals in this study. The impact behaviors of Gr/Ep laminates were simulated and the impact forces were reconstructed using the sensor signals. Finally, the impact damages were predicted by finite element analysis with the reconstructed forces. For experimental verification, a series of low-velocity impact tests from low energy to damage-induced energy were carried-out. The extent of damage in each case was examined by means of ultrasonic C-scan and the measured damage areas were agreed well with the predicted areas by the F.E.A.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 추계학술발표대회 논문집
• /
• pp.53-56
• /
• 2005

In this study, the material characterization and the dynamic behavior of 3D orthogonal woven composite materials has been studied under transverse central low-velocity impact condition by means of the micromechanical model using finite elements. To build up the micromechanical model considering tow spacing and waviness, an accurate unit structure is stacked in x-y-z direction repeatedly. First, the mechanical properties of 3D orthogonal woven composites arc obtained by means of virtual experiment using full scale Finite Element Analysis based on the DNS concepts, and the computed elastic properties arc validated by comparison to available experimental results. Second, using the implementation of this validated micromechanical model, 3D transient finite-clement analysis is performed considering contact and impact, and the impact behavior of 3D orthogonal woven composite is investigated. A comparison study with the homogenized model will be carried out in terms of global and local behaviors.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 추계학술발표대회 논문집
• /
• pp.27-30
• /
• 2005

This paper studied the PVDF(polyvinylidene fluoride) and Acoustic Emission sensors characteristics of the laminated composite panels under the low velocity impact. The various impact test by changing impact height is performed on the instrumented drop weight impact tester. The STFT(short time Fourier transform) and WT(wavelet transform) are used to decompose the each sensor signals. A ultrasonic C-scan and digital scope are used to define damaged area in each case. The test result indicated that the individual sensor signals involve the damage initiation and development.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 추계학술발표대회 논문집
• /
• pp.98-101
• /
• 2000

Recently, composite material which has much excellent mechanical characteristics has been applied in many industries. However, it has a brittle characteristic under impact condition and its invisible characteristics of the damaged area has been the motivation of many engineers investigation. The modified failure criterion is implemented to predict the failure behavior of the composite plate subjected to low velocity impact using commercial finite element analysis code, ABAQUS-Ver. 5.8. The new criterion is in good agreement with experimental results and can predict the failure behavior of the composite plate subjected to low velocity impact more accurately.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 추계학술대회 논문집
• /
• pp.650-655
• /
• 1993

Carbon/epoxy composite(CFRP) coupons previously damaged by low velocity impact were tested under static tensile loading and microscope progress of damage was characterized by ultrasonic C-scan, Scanning Acoustic Microscopy (SAM) and Acoustic Emission(AE) techniques which were based on the application of elastic waves. The degress of impact damage has been correlated with the AE activity during monotonic or loading/unloading tensile testing as well as the result of ultrasonic test. The coupons were subjected to impact velocities ranged from 0.71 to 2.17 m/sec, which introduced the amount of damage rated as 0%, 10%, 30%, and 50% with reference to the total absorbed energy at fracture. Special attention was paid to determine optimal AE parameters to characterize the microscopic fracture process and to predict the residual strength of composite laminates. AE RMS voltage during the early stage of tensile loading was found an effective parameter to quantify the degree of impact damage. It was also found that the Felicity ratio is closely related to the stacking sequence and the residual strength of the CFRP laminates.

• 비파괴검사학회지
• /
• 제23권5호
• /
• pp.445-454
• /
• 2003

구조건전성 모니터링은 복합재 구조물이 운용되는 단계에서뿐만 아니라 설계 및 제작단계에서도 중요한 관심사가 되고 있다. 과도한 하중이나 저속충격은 모재균열이나 층간분리와 같은 복합재 파손의 원인이 될 수 있으며 이러한 손상은 구조물의 하중지지성능을 저하시키게 된다. 지능형 복합재 구조물에서의 구조건전성 모니터링기술의 개발은 항공기와 길은 복합재 구조물의 안전성 향상에 도움이 될 수 있다 본 연구에서는 압전세라믹 센서 및 광섬유 센서를 복합재 구조물의 건전성 모니터링에 적용하였으며 파손신호의 특징파악 틴 충격위치 검출을 위한 신호처리 방법을 제안하였다.