• Polymer(Korea)
• /
• v.25 no.6
• /
• pp.833-839
• /
• 2001

The crystallization characteristics of metallocene linear low density polyethylene was investigated by small angle light scattering and comparison was made with Ziegler-Natta linear low density polyethylene. The special efforts were made to find out the effects of branching number, length of branching and co-monomer content of m-LLDPE on the crystallization behavior of m-LLDPE. It was found that m-LLDPE has longer induction time to start crystallization from the amorphous state than that of conventional LLDPE with similar branching number, but the rate of crystallization seems not change much in both LLDPEs. Lowering of branching number in m-LLDPE resulted in both increasing of rate of crystallization and reducing induction time to crystallize. In general, the maximum size of spherulites of m-LLDPE is bigger than that of conventional LLDPE.

• The Journal of Engineering Geology
• /
• v.13 no.1
• /
• pp.51-65
• /
• 2003

A series of numerical simulations were carried out using STOMP( Subsurface Transport over Multiple Phase) simulator. The flow and distribution of LNAPL were analyzed in homogeneous fine and coarse sand. Vertical movement of LNAPL is faster in the coarser sand. But the total volume of LNAPL retained in the unsaturated zone is larger in the finer sand. A fine layer in the coarse sand domain is also simulated. The results showed that the retained LNAPL volume and shape are highly influenced by the Position of the fine layer. Flow and distributions of LNAPL were simulated when there were heterogeneous lenses in the sand domain. Water table fluctuation was also considered. In these cases, it was found that the heterogeneous lens was a barrier to LNAPL flow, and water table fluctuation stimulated the downward movement of retained LNAPL. The LNAPL flow and distribution observed in these numerical experiments show that in the subsurface environment, the behaviors of LNAPL highly depend on heterogeneities of unsaturated zone and the dynamic hydrogeologic condition such as water table fluctuation. These results can explain some of the complexity of LNAPL flow and distribution Patterns in LNAPL contaminated field sites.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.586-586
• /
• 2013

저밀도 플라즈마는 반도체 공정, 나노 신소재 분야 및 우주 항공 분야 등 여러 분야에 이용되며, 플라즈마 진단 및 분석을 통해 효과적인 플라즈마 제어가 가능하다. 특히, 전자 에너지 분포 함수(Electron Energy Distribution Function, EEDF)는 전자 온도, 플라즈마 밀도 및 플라즈마 전위 등의 플라즈마 변수를 측정하거나 전자 가열 매커니즘 등을 이해하는데 있어서 매우 중요하므로 정밀한 측정이 필요하다. 그러나 RF fluctuation에 의해 낮은 전자 에너지 부분에서 EEDF가 왜곡되어 측정된 데이터 및 분석의 신뢰도가 떨어지게 된다. 이러한 문제점을 해결하기 위해 RF fluctuation 보상을 위한 쵸크 필터가 사용되며, 쉬스 임피던스에 비해 쵸크필터의 임피던스가 클수록 보상 효과는 높아진다. 하지만 플라즈마의 밀도가 낮아지면 쉬스 확장에 의해 쉬스 임피던스가 증가하므로 쵸크 필터에 의한 보상만으로는 충분한 개선 효과를 얻기 힘들다. 따라서 본 연구에서는 효과적인 RF fluctuation 보상을 위해 임피던스가 높은 쵸크 필터를 설계하고 추가적으로 레퍼런스링에 전압을 걸어 쉬스의 임피던스를 줄이는 방법도 적용하였다. 유도결합방식으로 $10^{-8}cm^{-3}$ 대의 저밀도 아르곤플라즈마 방전시켰으며, 단일 랑뮤어 탐침법으로 EEDF를 측정한 결과 낮은 전자 에너지 부분의 왜곡이 개선됨을 확인하였다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.4
• /
• pp.403-408
• /
• 2014

In this paper, we consider the encoding scheme of low density codes. In particular, we propose the fast encoding algorithm of the low density codes using circulant permutation matrices, The fast encoding algorithm is similar to the fast Hadamard transform, and the results show that the proposed scheme is a simple and fast encoding algorithm of the low density codes.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.363-364
• /
• 2012

기존 양자점에 대한 연구는 레이저 다이오드와 광증폭기등과 같은 광소자의 활성층에 사용되던 양자우물을 대체하기 위하여 고밀도, 고균일 양자점 성장에 관한 연구가 활발히 진행되었지만, 최근에는 양자점을 이용한 Single-photon source의 관심이 높아짐에 따라 저밀도 양자점 성장에 관한 연구가 주목 받고 있다. 본 연구에서는 수직형 저압 Metal organic chemical vapor deposition (MOCVD)를 이용하여 InP 기판 위에 저밀도 InAs 양자점을 성장하였다. 저밀도의 양자점을 성장하기 위하여 양자점과 덮개 층($1.1 {\mu}m$ InGaAsP)사이에 V족 원료 가스인 As만 공급하는 성장 중단 시간 (GI:Growth interruption)을 삽입하였다. 시료의 구조는 InP (100)기판위에 50 nm InGaAsP barrier, 1.5ML GaAs를 성장 후 InAs 1.9 ML를 성장하였다. 그 후 0, 1, 2, 5 분의 GI을 삽입한 후 InGaAsP 와 InP 덮개층을 성장하였다. 양자점의 밀도와 형상을 측정하기 위하여 Atomic force microscopy (AFM)을, 광학적 특성 분석을 위하여 저온 Micro Photoluminescence (${\mu}$-PL)을 측정하였다. 성장 중단 시간의 증가에 따라 InAs/InP 양자점의 높이와 넓이는 증가하고 밀도는 감소하였다. 성장 중단 시간 3분 이후에는 밀도 감소가 둔화 되었으며, 5분일 때 $3.2{\times}10^7/cm^2$의 극저밀도 InAs/InP 양자점이 성장되었다. 또한 저밀도 양자점 시료의 저온 ${\mu}$-PL을 측정하여 단일 양자점의 exciton과 bi-exciton peak가 측정되었다.

• Korean Journal of Poultry Science
• /
• v.36 no.1
• /
• pp.1-7
• /
• 2009

This study was performed to evaluate the effect of the level of stocking density of housing with or without window on chicken meat quality. The incidence of $1^+$ grade of whole chicken housed with window significantly influenced by stocking density. The incidence of $1^+$ grade chicken at high stocking density ($0.050\;m^2$/head), standard stocking density ($0.066\;m^2$/head), and low stocking density ($0.083\;m^2$/head) was 26, 52, and 66%, respectively. Breast muscle of chicken housed with window and with low stocking density showed higher incidence of $1^+$ grade than high stocking density. Also minor and severe PSE (pale, soft, extractive) incidence of chicken meat were showed 4% each, while the $1^+$ grade chicken was not appeared at low density. In chicken thigh, the incidence rate was not affected by stocking density. In chicken housed without window, the incidence of $1^+$ grade chicken in high, standard, and low stocking density was 18, 8, and 46%, respectively. Also, the incidence of $1^+$ grade chicken breast was 2.6 times higher than the chicken in low stocking density. However, incidence of $1^+$ grade thigh was not affected by the stocking density. These results suggest that high stocking density significantly reduced the incidence of $1^+$ grade chicken meat regardless of housing with or without window.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.8 s.338
• /
• pp.1-10
• /
• 2005

In this paper, the explicit low density codes construction from the generalized permutation matrices related to algebra theory is investigated, and we design several Jacket inverse block matrices on the recursive formula and permutation matrices. The results show that the proposed scheme is a simple and fast way to obtain the low density codes, and we also Proved that the structured low density parity check (LDPC) codes, such as the $\pi-rotation$ LDPC codes are the low density Jacket inverse block matrices too.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.05a
• /
• pp.347-348
• /
• 2012

수소가 포함 되지 않은 저밀도 구조의 카본 박막을 마그네트론 스퍼터링으로 합성하였다. 본 실험을 통하여 플라즈마 변수에 따른 저밀도 구조의 카본 박막의 미세 구조와 물리적 특성과의 상관관계를 FESEM, AFM, 4-point probe의 분석 기구를 통하여 분석 하였고, 비정질 저밀도 구조의 탄소 박막에 Pt을 ion sputtering을 통하여 도핑 한 결과 1000에서 $0.0013{\Omega}cm$ 까지 전기 비저항을 낮추는 결과를 얻었다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.05a
• /
• pp.220-220
• /
• 2012

저밀도 알곤 유도결합플라즈마(Ar-ICP) 를 적용한 그래핀 클리닝 연구를 보고한다. 알곤 축전결합플라즈마(Ar-CCP)는 높은 이온포격에너지 (수백 eV) 로 인하여 그래핀의 C-C $sp_2$ bonding을 쉽게 파괴하고 defect을 형성시킨다. 그러나 저밀도 ($n_i$ < $5{\times}10^8cm^{-3}$) Ar-ICP 에 노출된 그래핀은 낮은 이온포격에너지, 이온밀도로 인하여 defect 이 형성되지 않고 residue 제거가 가능하였다. Graphene 이 집적된 back-gated field effect transistor (G-FET) 가 저밀도 Ar-ICP 에 노출될 경우 resist residue 제거로 인하여 $V_{dirac}$ 이 0 V 방향으로 이동하고 mobility 가 증가하는 것을 확인하였다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.10
• /
• pp.841-847
• /
• 2021

In this paper, the applicability of the low-density surface film copper mesh for aircraft applications have been analyzed. Recently, low-density surface film copper mesh is developed to reduce weight and cost compared with traditional surface film copper mesh. In order to apply low-density surface film copper mesh to aircraft, it is needed to analyze its electromagnetic effects as well as structural integrity with sandwich panels to prevent pinholes. The structural integrity and electromagnetic characteristics have been analyzed for 2 samples of low-density surface film copper mesh and 1 sample of surface film copper mesh. To review the applicability of the low-density surface film, it is combined with sandwich composite panel to confirm pinhole effects. The low-density surface film has been modeled as a periodic structure and analyzed with 3D electromagnetic simulation tool. The simulation results has been verified through measured electromagnetic transmission results using free space measurements. From the results, it will be possible to use these results for the analysis and the applicability of low-density surface film copper mesh for aircraft.