Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
/
2010.06a
/
pp.75-75
/
2010
기존 할로겐프리 제품은 PVC와 비교하여 유연성이 크게 떨어져 PVC 사용에 대한 규제가 강화되고 있음에도 불구하고, 이를 쉽게 대체하기 곤란하다는 문제점이 있다. 이에 할로겐프리 재료만 사용하여 고난연성, 예를 들면 UL 1581 에 따른 VW-1 규정을 충족하는 고난연성을 가지면서도 경도가 낮아(경도 70수준, Shore A) 재질의 유연성이 확보된 고분자 재료를 개발하는 것이 요구된다. 실험 결과로부터 인장강도 11[Mpa], 신장율 720[%], 가열후 인장강도 잔율 90[%], 가열후 신장잔율 88[%], 산소지수 38.0, 수직난연시험 합격, 경도(Shore A) 70, 백화현상이 나타나지 않는 등 우수한 특성을 보였다.
Journal of the Earthquake Engineering Society of Korea
/
v.6
no.4
/
pp.39-49
/
2002
In this paper, the characteristics of RB(rubber bearing) were studied by various prototype tests on RB with low hardness rubber. The characteristics of RB were tested on displacements, repeated cycles, frequencies, vertical pressures, temperature, vertical stiffness and the capability of shear deformation. The prototype test showed that the displacement and vertical pressures were the most governing factors influencing on characteristics of RB. The effective stiffness and equivalent damping of RB showed small increment in high frequency range. After the repeated cyclic test with 50's cycles, the effective stiffness and equivalent damping of RB were almost constant compared with those of the 1st cycles due to low hysteretic damping. The shear modulus of RB was reduced after large deformation, and this value of RB was partly recovered after 40 days. Finally, the shear failure test of RB was conducted, the prototype was failed over 490% of shear strain, and real size RB was failed over 430% of shear strain.
Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
/
1997.04a
/
pp.41-46
/
1997
TiN 코팅은 마모에 대한 저항성 및 고체 윤활 효과가 매우 우수하여 내마모성 및 저마찰이 요구되는 절삭공구나 피스톤 베어링 및 각종 축계의 코팅막으로 사용이 증가되고 있다. 일반적으로 재료의 경도와 인성은 서로 상반 관계를 갖고 있어 공학적으로 경도와 인성을 모두 요구하는 표면을 얻기 위해 연질 모재 위의 세라믹 코팅은 그 요구를 만족시킬 수 있는 가장 각광받는 표면처리 방법중의 하나이다. 그러나, TiN과 같은 경질 박막의 공학적 적용시 가장 요구되는 마모수명은 모재의 조도나 경도, 증착 방법, 접촉 상태, 코팅막의 두께 및 마모의 발생 기구 등에 따라 마찰 및 마모 메커니즘의 현저한 차이를 나타내기 때문에 예측이 거의 불가능한 실정이고, 아직까지 이러한 마모수명 비교 평가방법에 대한 기준 설정 및 정량적 정립이 이루어지지 않고 있다. 본 연구에서는 모재의 경도, 조도, 코팅 두께가 다른 TiN 경질 박막에 압입시험과 스크래치시험시 발생되는 균열 발생 메커니즘과 미끄럼 시험시 발생되는 마모 메커니즘의 연계성을 밝히고 압입 및 스크래치 시험시 코팅막이 손상되는 임계하중과 미끄럼 시험시 접촉하중 변화에 따른 마모수명의 정량적 연관성을 찾아보고자 한다.
Kim, Dae-Uk;Lee, Gyeong-Hwang;Park, Jong-Won;Park, Gwang-Su
Proceedings of the Korean Institute of Surface Engineering Conference
/
2011.05a
/
pp.110-111
/
2011
비정질 탄소계 박막은 높은 경도, 내마모성, 내화학성 및 전기저항특성을 갖는 박막으로 다양한 산업분야에 응용 및 적용 연구가 진행되고 있다. 특히, 탄소계 박막은 자동차 및 기계 산업분야에 있어서 우수한 물리적 특성인 고경도 및 저마찰 특성을 이용한 금속 표면의 기능성 부여를 목적으로 활발하게 연구가 이루어지고 있다. 본 연구는 사출금형 표면의 고경도 저마찰화를 목적으로 비정질 탄소계 박막을 사출금형 소재 (KP4)에 제작하고, 이들 코팅막에 대한 경도, 밀착력, 마찰계수 등의 물리적 특성을 평가하였다. 또한, 탄소계 코팅막 제작 공정 조건이 코팅막의 물리적 특성에 미치는 영향에 대하여 고찰하였다.
Kim, Sang-Gwon;Yeo, Guk-Hyeon;Lee, Jae-Hun;Kong, Jung-Hyun;Okumiya, Masahiro
Proceedings of the Korean Institute of Surface Engineering Conference
/
2014.11a
/
pp.294-295
/
2014
스크린 플라즈마 기술은 저온에서 가열과 동시에 플라즈마에 의한 확산층을 형성할 수 있는 매우 큰 장점을 가진 기술이다. 특히 저합금강의 내부 경도 저하를 최소화 한 상태에서 표면경도를 올려 플라스틱 금형강 등에 이를 적용할 수 있는 연구를 진행하였고, 이에 대한 결과를 보고하고자 한다.
Journal of the Earthquake Engineering Society of Korea
/
v.12
no.3
/
pp.11-20
/
2008
In this paper, the characteristics of low hardness high damping rubber bearings(HDRB) were studied through various prototype tests. The low hardness HDRB were tested to evaluate vertical stiffness, shear stiffness, equivalent damping ratio, various dependencies of shear properties, ultimate shear properties and other factors. The prototype test was performed according to the specifications of ISO 22762-1, and evaluated according to the specifications of ISO 22762-3. The results of the prototype test showed that shear strain and temperature were the factors that most greatly influenced shear stiffness, and that compressive stress was the factor that most greatly influenced the equivalent damping ratio. The frequency dependence test of shear properties showed that two general tendencies of frequency dependence could be observed. At frequencies over 0.1Hz, the changes in shear properties were small. However, at frequencies under 0.1Hz, the changes in shear properties rapidly decreased. The creep test and the ultimate shear test were also performed, and both of them satisfied the requirements of ISO 22762-3.
Kim, Seong-Min;Kim, Gyeong-Hun;Lee, Geun-Hyeok;An, Se-Hun;Im, Sang-Ho;Han, Seung-Hui
Proceedings of the Korean Vacuum Society Conference
/
2014.02a
/
pp.275.2-275.2
/
2014
현재 자동차 분야에서 차량 경량화의 한 수단으로 자동차용 유리를 고강도 투명 플라스틱 소재인 Polycarbonate(PC)로 대체하고자 하는 연구가 이루어지고 있다. 하지만, PC의 낮은 내마모 특성과 자외선에 의한 열화 및 변색 현상은 해결하여야 할 문제점으로 지적되고 있으며, 에너지 소비 저감을 위하여 적외선 영역 반사율(reflectance)이 높은 저방사(low emissivity) 특성이 요구되고 있다. 본 연구에서는, ICP-assisted reactive magnetron sputtering 장비를 이용하여 투과율(transmittance)이 확보되고, 고경도 특성을 갖는 Al-Si-N와 300 nm 파장 이하의 자외선 차단 특성이 있는 SiN:H 그리고 저방사 특성을 위해 Al을 증착하였고, 박막의 증착 순서는 SiN:H 박막을 가장 아래에 증착하고 그 위에 Al/Al-Si-N 박막을 다층으로 형성하였다. 박막의 chemical state와 crystallinity를 확인하기 위하여 XPS(X-ray Photoelectron Spectroscopy), XRD (X-ray Diffraction)를 이용하여 분석하였다. Knoop ${\mu}$-hardness tester와 Taber tester를 이용하여 경도 및 내마모 특성을 분석하였다. 제작된 샘플의 Al-Si-N 박막 경도는 Si 비율에 따라 다른 경도 특성을 갖는데, 실제 Si/(Al+Si) 비율이 24%에서 최대 31 GPa의 경도 값을 갖는 것을 확인하였다. UV-Vis Spectrometer를 이용하여 250 nm~700 nm 파장의 투과율을 측정하였고, 자외선 영역의 경우 SiN:H 박막에 의해 300 nm 이하의 파장에서 2% 이하의 투과율을 확인하였다. 그리고 FT-IR(Fourier Transform Infrared Spectroscopy)를 이용하여 $2.5{\mu}m{\sim}15{\mu}m$ 파장의 반사율을 이용하여 방사율을 측정하였는데, 3*(Al/Al-Si-N) 구조의 다층 박막의 경우 방사율은 0.27로 측정되었다.
Journal of the korean academy of Pediatric Dentistry
/
v.28
no.2
/
pp.199-206
/
2001
The purpose of study was to compare the plasma arc light with the halogen light in compostie resin curing. Three composite resin materials(Z-100, 3M, USA; Tetric Ceram, Vivadent, Liechtenstein; SureFil, Dentsply, USA) were filled in the teflon molds (4mm in diameter and 2, 3, 4, 5mm in thickness) and cured with either the conventional low-intensity light curing unit with a halogen lamp (Optilux 360, Demetron, U.S.A.) for duration of 40 seconds or with the high-intensity light curing unit with a plasma arc lamp (Flipo, Lokki, France) for duration of 3, 6, and 9 seconds. The intensity of halogen light was about $370mW/cm^2$ and that of plasma light was about $1,900mW/cm^2$. After one week, the surface hardnesses of both the top and the bottom of the resin samples were measured with a microhardness tester(MXT70, Matsuzawa, Japan). There were significant differences in the hardness between the top and the bottom of the resin samples except the 2mm thickness samples cured by halogen light for 40s or by plasma light for 9s. There was no significant difference between the hardness values of the top surfaces of the thickness groups. The hardness values of the bottom surfaces decreased as the curing time decreased and as the thickness of resin samples increased, and the three kinds of resin composites showed similar patterns. The results suggest that the halogen light for 40 seconds might be able to cure greater depth of resin composites than the plasma light for 3, 6, or 9 seconds.
Proceedings of the Korean Vacuum Society Conference
/
2012.02a
/
pp.282-282
/
2012
일반 금속은 부식에 약하다는 단점을 보완하기 위해 개발된 스테인레스 스틸은 내식성이 필요로 하는 다양한 분야에서 이용되고 고크로뮴을 포함한 오스테나이트 스테인레스 스틸은 일반적으로 엔지니어링 재료로 사용되고 있다. 하지만 오스테나이트 스테인레스 스틸은 낮은 표면 경도와 지지용량으로 인해 내마모특성이 필요한 제품에는 사용이 미약한 수준이다. 현재 이러한 내마모특성을 높이기위해 오스테나이트 스테인레스 스틸은 이온질화와 이온주입등의 방법을 사용하여 표면 특성을 향상시키고자 연구되고 있다. 본 연구에서는 저진공 하에서 플라즈마를 이용하여 시편에 질화층과 Nitrogen Supersaturated Austenite층(S-phase)을 형성하여 경도와 인성을 향상시키고, 형성된 S-phase층의 두께에 따른 내식성, 내열성 특성을 확인하였다. 그리고 스테인레스 계열 시편의 질화시 나타나는 CrN층과 비교하였다. 특성 확인을 위한 시편은 약 $400{\sim}500^{\circ}C$ 사이의 공정온도로 질소와 수소가스를 혼합하여 플라즈마를 형성하고 약 4시간동안의 공정을 통해 제작하였다. 제작된 시편의 경도와 조직, S-phase층의 두께를 분석하고 CrN층의 형성여부를 확인하였다. 이와 더불어 공정압력과 가스비의 변화에 따른 실험을 진행하여 질화특성을 확인하고자 하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.