• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.4D
• /
• pp.323-330
• /
• 2010

The time in port for vessels is one of the important factors for analyzing the operation status and the capacity of ports. In addition, the time in port for vessels can be directly used for estimating the greenhouse gas emissions resulted from vessels in port. However, it is unclear which variables can affect the time in port for vessels and what the marginal effect of each variable is. With these challenges in mind, the study analyzes the time in port for vessels arriving and departing port of Busan by using a parametric survival model. The results show that the log-logistic accelerated failure time model is appropriate to explain the time in port for 19,167 vessels arriving and departing port of Busan in 2008, in which the time in port is significantly affected by gross tonnage of vessels, service capacity of terminal, and vessel type. This study also shows that the greenhouse gas emission resulted from full-container vessels, which accounted for about 61% of all vessels with loading/unloading purpose arriving and departing port of Busan in 2008, is about "17 ton/vessel" in the boundary of port of Busan. However, the hotelling greenhouse gas emissions resulted from non-container vessels (3,774 vessels; 20%) are greater than those from the full-container vessels. Hence, it is necessary to take into account more efficient port management polices and technologies to reduce the service time of non-container vessels in port of Busan.

• Proceedings of the Korea Society for Simulation Conference
• /
• 1998.03a
• /
• pp.37-37
• /
• 1998

현재 정부는 우리나라 물동량 증가에 따른 수도권 항만의 기능 재정립 및 신항만 입지를 선정하기 위한 조사·연구를 진행중이다. 본 연구에서는 현행 인천항의 항만 시스템과 신규항만 시스템에 대한 컴퓨터 시뮬레이션 모형을 개발하여 신항만 개발로 인한 선박대기시간의 감소 및 항만 체류 시간의 감소 등을 예측하였다. 이 결과는 신항만 개발의 경제적 타당성 분석에서 사용자 편익으로 활용될 수 있다. 시뮬레이션 모형은 ARENA를 이용하여 개발하였다. 수도권 항만 즉 인천항에서 처리되는 화물은 양곡을 비롯한 12개 품목이며, 각각의 화물은 5단계의 규모별로 나누어 선박의 도착간격 및 재항시간 분포 등을 1995년 인천항의 실제 자료를 토대로 추정하였다. 선박의 도착간격은 지수 분포로 나타났으며, 서비스시간은 삼각분포(Triangular Distribution)로 근사되었다. 화물량 예측치가 1996, 2001, 2006, 2011, 2020년으로 되어 있고, 이에 따른 신항만 입지 및 규모가 결정됨에 따라 각 연도별로 신항만을 개발할 경우와 개발하지 않은 경우의 각각에 대한 연간 화물별 선박대기 시간 및 재항시간 등을 추정하였다.

• Journal of Korean Port Research
• /
• v.14 no.1
• /
• pp.13-26
• /
• 2000

In this paper, we compare and analyze the current state of the productivity of the stevedoring work among several container terminals in 1999. Based on these results of analysis, we firstly classify several factors which impede the efficient operations of container terminal as follows ; late arrival of container beyond cargo closing time(CCT), change of port of destination, change of vessel, and return cargo. Such factors are major cause for the cargo rehandling on terminals, thus deteriorate the overall performance of transfer crane during the stevedoring work. In order to improve the productivity of container terminal, we suggest that it is necessary for establishing and operating the efficient logistics management system. Especially, we emphasize the importance of information exchange on the scheduled cargoes among the relevant parties such as shippers, shipping companies, and terminal operators, which is the most effective way to alleviate the cargo rehandling.

• Journal of the Korea Society for Simulation
• /
• v.17 no.3
• /
• pp.63-73
• /
• 2008

The aim of study is to analyze the berth occupancy rate according to the ship size. P Iron and steel company operate exclusive bulk terminal at P port and G port and the depth of water at berth are not so equal each other. And to reduce the sea transport cost between loading port and unloading port P and G, P company increases the number of large ship while ship scheduling. But it causes to increase the berth congestion at the specific water depth berth owing to the draught of large ship. At this point, usually ship waiting time starts to rise even at low levels of berth occupancy rate, and will rise more and more sharply at the level of full utilization. But it is not common at exclusive terminal like P port and G port. Bulk ships arrive at port according to the early planned arrival time and the coefficient of variation of ship arrival time is not so big. So queueing time at exclusive terminal does not rise sharply near 80-90 berth occupancy rate.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2005.10a
• /
• pp.303-309
• /
• 2005

This paper will suggest how can we guarantee terminal QoS like ship waiting time ratio and ship residing time applying RFID(Radio Frequence Identification) technology, raising up rapidly as a fundamental solution of new growing industry, to port information system. Also, lead time of whole port logistics can be decreased for reduction of loading & discharging time resulted from productivity improvement of Twinlift G/C(Gantry Crane) and Y/T(Yard Tract) etc as applying RFID technology to terminal operation. The purpose of this paper is suggesting of new business model of u-Port that port QoS can be guaranteed from mutual agreement of each terminals RFID technology applied and focusing on the implementation plan.

• Journal of Navigation and Port Research
• /
• v.30 no.3 s.109
• /
• pp.211-217
• /
• 2006

In recent years, the pileup of world ports is deepening as time goes by due to China effect and continuous increase of world trade volume. The shipping companies try to reduce their shipping cost by using mega vessels in the ports. Shipping companies consider most of the ships turnaround time as a critical factor when selecting a calling port for reducing cost. This paper will suggest how we can guarantee terminal QoS like ship waiting time ratio and ship residing time applying RFID(Radio Frequence IDentification) technology, raising up rapidly as a fundamental solution of new growing industry to port information system. Also, lead time of whole port logistics can be decreased for reduction of loading & discharging time and result from productivity improvement of Twin-lift G/C(Gantry Crane} as applying RFID technology to terminal operation. The purpose of this paper suggests that the new business model of U-Port which port QoS can be guaranteed using RFID based RTLS technology.

• Journal of Korea Port Economic Association
• /
• v.39 no.3
• /
• pp.47-60
• /
• 2023

A thorough inventory of ship emissions, particularly ship's emission of in-port area is necessary to identify significant sources of exhaust gases such as NOx, SOx, PM, and CO₂ and trends in emission levels over time, and reduce their serious effects on the environment and human health. Therefore, the goal of this study is to assess the volume of emissions from ships in Mokpo port, which serves as a gateway to the southwest coast of Korea, using a bottom-up methodology and data from the automatic identification system (AIS) and the Korean Port Management Information System (Port-MIS). In this work, an analysis of ship movement utilizing AIS data and an actual set of data on ship specification were gathered. By examining ship movement using AIS data, We also proposed a new approach for identifying cruising/maneuvering mode. Finally, the results were classified by ship operating mode, by exhaust gas, by ship type, and by berth, which provides a thorough and in-depth analysis of the air pollution caused by ships in Mokpo port.

• Journal of Korea Port Economic Association
• /
• v.26 no.3
• /
• pp.198-220
• /
• 2010

This paper investigate the problems of standard container port handling capacity in establishing national port development plan in Korea. Considering container port developing, it's not easy to adopt container port service quality parameters such as lay time constraint of very large container ships by using the standard guideline of container port handling capacity. A simple methodology that connects vessel waiting to service time(w/s) and berth occupancy to costs has been used to evaluate the performance of a container terminal. But the total handling capacity have to be calculated by the performance of the handling system and number of equipments and layout of terminal by using computer simulation that represents of reality events needs to be performed by probabilistic techniques. A simulation model of estimation of container terminal capacity is introduced in order to establish a hub terminal for very large container ships that focus the port's quality of service and also suggest as tool for policy maker to justify a required port investment.

• Journal of Navigation and Port Research
• /
• v.39 no.6
• /
• pp.439-450
• /
• 2015

This study objects to find characteristics in chemical tanker markets and to determine optimal chemical tanker size using a total shipping cost in main trading route of asia chemical tankers .Precedent studies of determination of the optimal ship size and case studies about chemical tankers was carried out and tried to introduce a cost model which is applicable to chemical tanker. This study is dependant on numerical analysis and involves scenario analysis to minimize sensitivity of results. This analysis shows as follows. First, 12,000DWT tanker is an optimal size on the 'Far East-Middle East' services, 9,000DWT tanker is a most competitive on the 'Far East-South East Asia' services and 3,000DWT tanker is a most economic size on the 'Inner Far East' services at average market situation. Second, the bigger size of chemical tanker, the more competitive advantage the tanker will obtain when bunker fuel prices rise. Small size ship gets more competitive during bunker prices down. Third, market fluctuation of time charter rate for chemical tanker is less than 20% against its average time charter hire which means less volatile. And tanker's competitiveness per each size is remained mostly same when time charterer rates rise at same proportion. Fourth, bigger size chemical tankers have cost advantages when tanker's quantity of each part cargo increase. And small-sized tanks are more competitive when part cargo scales decrease. For the last, ship's port stay strongly influences on the determination of the optical tanker size. When vessel has shorter port stay, bigger-sized tanker will be more competitive and even can be competitive if applies in short voyage as well.

• Resources Recycling
• /
• v.3 no.2
• /
• pp.9-16
• /
• 1994

In this study, the grinding and wet cyclone process of the dust for the effective separation of high purity iron powder and iron oxide were investigated. The results obtained in this study can be summarized as follows: 1. By applying the wet cyclone technique for the iron powder(+200 mesh) produced from EC dust of the Kwangyang 2nd steel making factory, the iron powder of high content more than 99.76% of Fe was obtained with 47.66% yield at grinding time of 5 minutes by attritor. 2. The particle size distribution of the iron powder recovered from converter dust is quite simillar with the iron powder of sweden Hoganas Co.(W40.24, W40.29, W40.37, W40.37OX). 3. By using iron powder, copper ions are all adsorbed and removed in any concentration ranges of copper sulfate solution(Cu:100, 200, 300, 600 ppm).