• The Journal of Korean Society for Radiation Therapy
• /
• v.29 no.1
• /
• pp.19-26
• /
• 2017

Purpose: The application of density override is very important to minimize dose calculation errors by fiducial markers of metal material in proton treatment plan. However, density override with actual material of the fiducial marker could make problem such as inaccurate target contouring and compensator fabrication. Therefore, we perform density override with surrounding material instead of actual material and we intend to evaluate the usefulness of density override with surrounding material of the fiducial marker by analyzing the dose distribution according to the position, material of the fiducial marker and number of beams. Materials and Method: We supposed that the fiducial marker of gold, steel, titanium is located in 1.5, 2.5, 4.0, 6.0 cm from the proton beam's end of range using water phantom. Treatment plans were created by applying density override with the surrounding material and actual material of the fiducial marker. Also, a liver cancer patient who received proton therapy was selected. We located the fiducial marker of gold, steel, titanium in 0, 1.5, 3.5 cm from the proton beam's end of range and the treatment plans were created by same method with water phantom. Homogeneity Index(HI), Conformity Index(CI) and maximum dose of Organ At Risk(OAR) in Planning Target Volume(PTV) as the evaluation index were compared according to the material, position of the fiducial marker and number of beam. Results: The HI value was more decreased when density override with surrounding material of the fiducial marker was performed comparing with density override with actual material. Especially the HI value was increased when the fiducial marker was located farther from the proton beam's end of the range for a single beam and the fiducial marker's position was closer to isocenter for two or more beams. The CI value was close to 1 and OAR maximum dose was greatly reduced when density override with surrounding material of the fiducial marker was performed comparing with density override with actual material. Conclusion: Density override with surrounding material can be expected to achieve more precise proton therapy than density override with actual material of the fiducial marker and could increase the dose uniformity and target coverage and reduce the dose to surrounding normal tissues for the small fiducial markers used in clinical practice. Most of all, it is desirable to plan the treatment by avoiding the fiducial marker of metal material as much as possible. However, if the fiducial marker have on the beam path, density override of the surrounding material can be expected to achieve more precise proton therapy.

• Proceedings of the Korea Contents Association Conference
• /
• 2015.05a
• /
• pp.175-176
• /
• 2015

몬테카를로 기법을 기반으로 한 모의실험을 통해 방사성 핵종별 주사기 차폐기구의 재질 및 두께에 대한 차폐분석 결과, 텅스텐, 납, 비스무스 경우 가장 높은 차폐효과를 보였다. 그러나 $^{18}F$ 선원의 경우, 차폐두께가 낮은 영역에서 저 원자번호 재질보다 더 높은 에너지를 나타냈으나, 이후 증가된 차폐두께에서는 더 낮은 에너지 분포를 나타냈다. 그 외 재질의 경우 구리, 철, 스테인리스 강, 황산바륨의 순서로 에너지가 낮은 분포를 나타냈고, 알루미늄, 플라스틱, 콘크리트, 물의 경우 핵종별로 각기 다른 양상을 나타냈으며, 상대적으로 감마선의 투과의 증가로 인해 전체적으로 차폐효과가 떨어지는 것으로 나타냈다.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.23 no.3
• /
• pp.173-181
• /
• 2017

This study was conducted to investigate the packaging characteristics including pack sources and pack components of processed foods in Korea. For the survey, 704 food package samples were selected based on the consumption of top 10 brackets in each food item. They were consisted of 1,245 packaging components. Seven specific items were firstly investigated including product name, capacity of the food, package component, package source, food contact area, food contact ratio, and package thickness. The processed foods in Korea can be classified into 16 pack sources and 21 pack components, respectively. By using this information, the data were analyzed specifically. The collected data were analyzed in 8 major categories: frequency of use by pack components and pack sources, pack components by the products, pack sources by the products and pack components, pack thickness/food contact ratio by the products, food contact ratio by pack components and pack sources. Consequently, this survey will provide various information of the packaging characteristics of processed foods in Korea.

• Journal of Digital Convergence
• /
• v.15 no.7
• /
• pp.351-358
• /
• 2017

This study seeks to propose the virtual costume's pipeline production in digital fashion show which is based on the unique characteristic combining computer graphic technology and traditional fashion design. This study analyzed the fabric materials based on Korean traditional costume to create a virtual Hanbok for the digital fashion show, and conducted the group of professional's satisfaction statistics through the experiment to verify the realistic usability. The contents of primary process of producing virtual Korean costume is analyzed by summarizing the thickness, weight, and color as the three essential fabric properties required for virtual Hanbok. In addition, virtual costumes are compared with real Hanbok based on the usability survey to evaluate the positive research result by forty graphic experts. The purpose of this study is to present the guideline of essential material analysis of the fabrication to digital fashion show in the virtual clothing production.

• Korean Chemical Engineering Research
• /
• v.45 no.5
• /
• pp.500-505
• /
• 2007

The objectives of this research were to (1) identify the membrane fouling potential due to different fractions of NOM (2) correlate the physicochemical properties of NOM and membranes with the adsorption of humic substances on membrane (4) find out the effect of membrane physical and chemical washing according to membrane material. The static adsorption test and adsorption test showed that hydrophobic organics adsorbed much more quickly than hydrophilic organics. In case of the effect of membrane properties on the adsorption of organic fractions, the adsorption rate ratio(a) of hydrophobic membrane (0.016, 0.077) was greater than that of hydrophilic membrane (0.010, 0.033) regardless of the kind of organic fractions. This suggests that the UF membrane fouling were occurred mainly by internal pore size decreasing due to adsorption of organic into pore surface for hydrophobic membrane, and by sieving of organics and forming a gel layer on the membrane surface for hydrophilic membrane. In conclusion, the decrease in the pore volume, which was caused by the organic adsorption into the internal pore, was greater with the hydrophobic membrane than with the hydrophilic membrane. In case of the effect of membrane properties on permeate flux, the rate of flux decline for the hydrophobic membrane was significantly greater than that for the hydrophilic membrane.

• Explosives and Blasting
• /
• v.22 no.1
• /
• pp.5-13
• /
• 2004

성형폭약의 설계변수인 폭약 종류, 폭약 량, 라이너 각도, 라이너 두께, 라이너 재질들을 다원배치법으로 분석하였다. 교호작용이 있는 설계변수는 강건 설계를 통하여 기여비를 산정하여 정량적으로 평가하였다. 연구결과 폭약종류와 라이너 각도는 비교적 독립적인 설계변수였고 약량과 라이너 재질, 라이너 두께는 교호작용이 있었다. 강건설계에 의해 산정된 설계변수의 기여비는 약량이 73.3%, 라이너의 재질이 19.4%, 라이너의 두께가 7.3%이다.

• Resources Recycling
• /
• v.26 no.6
• /
• pp.73-83
• /
• 2017

Used small household appliances have a wide variety of product types and component materials, and contain high percentage of black plastics. However, they are not being recycled efficiently as conventional sensors such as near-infrared ray (NIR), etc. are not able to detect black plastic by types. In the present study, an automatic sorting system was developed based on laser-induced breakdown spectroscopy (LIBS) to promote the recycling of waste plastics. The system we developed mainly consists of sample feeder, automatic position recognition system, LIBS device, separator and control unit. By applying laser pulse on the target sample, characteristic spectral data can be obtained and analyzed by using CCD detectors. The obtained data was then treated by using a classifier, which was developed based on artificial intelligent algorithm. The separation tests on waste plastics also were carried out by using a lab-scale automatic sorting system and the test results will be discussed. The classification rate of the radial basis neural network (RBFNNs) classifier developed in this study was about > 97%. The recognition rate of the black plastic by types with the automatic sorting system was more than 94.0% and the sorting efficiency was more than 80.0%. Automatic sorting system based on LIBS technology is in its infant stage and it has a high potential for utilization in and outside Korea due to its excellent economic efficiency.

• Explosives and Blasting
• /
• v.25 no.2
• /
• pp.23-33
• /
• 2007

It is difficult to measure a blast noise in the vicinity of tunnel blasting works and the effect of lowering noise changes very highly with types of soundproof materials. So, the main interest of this study focuses on the materials of a soundproof facilities and the method of noise forecast in a near distance. 20 types of the soundproof facilities are established and blast noise is generated using firecracker in a Hume concrete pipe. To analyze the variations of magnitudes of noise and frequency with the soundproof materials and types, the noise and frequency is measured in a short distance next to blast area.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1991.10a
• /
• pp.423-439
• /
• 1991

본 연구의 목적은 당제철소에서 생산하는 제품중 전기강판 방향성 제품의 제질(철손) 불량원인을 추적하여 조업 guidance를 제시하는 model개발이다. model개발은 현장조업 data에 대해 상관분석, 회귀분석, 분산분석등의 통계적분석을 통하여 재질에 영향을 미치는 주 관련인자들의 조업기준 재정립과 menu화면에 의한 자동 불량원인 추적 model을 개발하였으며, model개발을 위한 사용 tool은 SAS package를 활용하였다.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.1
• /
• pp.36-43
• /
• 2007

Elemental analysis, SEM-EDX, X-ray diffraction (XRD) and IR analysis were adopted to examine the quality of charred woods excavated from the underground of the Daewoongjeon Hall of Youngguksa Temple, Youngdong-gun, Chungbuk, Korea. A large amount of calcium was detected in SEM-EDX analysis. The analyses of chemical elements suggested that completely charred wood was carbonized at about $500^{\circ}C$. The XRD results indicated the destruction of cellulose crystalline region. The IR analysis exhibited that thermal degradation of wood component was different depending upon the carbonization temperature. It can be suggested from the results that PEG with different molecular weights should be used for the conservation of excavated charred woods.