• The Journal of the Convergence on Culture Technology
• /
• v.4 no.4
• /
• pp.201-206
• /
• 2018

The fourth fiscal estimate of the national pension following the aging of the population and falling yields estimated that the fund ran out in 2057, three years earlier than the third fiscal calculation. Accordingly, the government proposed a plan to immediately raise the insurance premium rate by 2 percent and maintain the income replacement rate by 45 percent, and to reduce the income replacement rate by 40 percent in 2028. In this form, increasing premiums and reducing income replacement rates will allow younger generations to sign up differently from existing subscribers, who previously had higher income replacement rates at lower rates. Therefore, the study aims to ease the burden on the elderly and younger by applying different insurance rates and income replacement rates for different ages.

• Journal of IKEEE
• /
• v.20 no.4
• /
• pp.435-438
• /
• 2016

HEVC CABAC binary arithmetic decoder operates in three decoding modes i.e. regular, bypass, and termination modes, where their decoding operations and time differ a lot. Furthermore, when renormalization occurs, its internal feedback loop induces large delay. In this paper, a binary arithmetic decoder was designed to solve this problem. In advance, it checks all range values with possible renormalization. When renormalization occurs, it immediately updates range value and finishes all calculation in a cycle. When implemented in 0.18 um process technology, its maximum operating frequency and gate counts are 215 MHz and 5,423 gates, respectively.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.447-450
• /
• 2010

This study was conducted to explore the flow contamination in the $CH_4-O_2$ vitiated air heater. Non-equilibrium and equilibrium calculation were made of the flow processes in the heater and nozzle assuming the inviscid and one dimensional flow. The results were compared with the measurement data. The overall results of this study showed additional non-equilibrium calculation should be considered to assess the presence of NO, which species could yield the combustion delay or no reaction, as a contaminant.

• Journal of Korea Water Resources Association
• /
• v.52 no.10
• /
• pp.729-742
• /
• 2019

Natural disasters such as floods has been increased in many parts of the world, also Korea is no exception. The biggest part of natural damage in South Korea was caused by the flooding during the rainy season in every summer. The existing flood vulnerability analysis cannot explain the reality because of the repeated changes in topography. Therefore, it is necessary to calculate a new flood vulnerability index in accordance with the changed terrain and socio-economic environment. The priority of the investment for the flood prevention and mitigation has to be determined using the new flood vulnerability index. Total 25 urban districts in Seoul were selected as the study area. Flood vulnerability factors were developed using Pressure-State-Response (PSR) structures. The Pressure Index (PI) includes nine factors such as population density and number of vehicles, and so on. Four factors such as damage of public facilities, etc. for the Status Index (SI) were selected. Finally, seven factors for Response Index (RI) were selected such as the number of evacuation facilities and financial independence, etc. The weights of factors were calculated using AHP method and Fuzzy AHP to implement the uncertainties in the decision making process. As a result, PI and RI were changed, but the ranks in PI and RI were not be changed significantly. However, SI were changed significanlty in terms of the weight method. Flood vulnerability index using Fuzzy AHP shows less vulnerability index in Southern part of Han river. This would be the reason that cost of flood mitigation, number of government workers and Financial self-reliance are high.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.431-435
• /
• 2011

This paper presents optimized searching technique to improve the performance of H.264/AVC. The proposed CAVLC encoder uses forward and backward searching algorithm to compute the parameters. By zero-block skipping technique and pipelined scheduling, the proposed CAVLC encoder can obtain better performance. The experimental result shows that the proposed architecture needs only 66.6 cycles on average for each $16{\times}16$ macroblock encoding. The proposed architecture improves the performance by 13.8% than that of previous designs. The proposed CAVLC encoder was implemented using VerilogHDL and synthesized with Megnachip $0.18{\mu}m$ standard cell library. The synthesis result shows that the gate count is about 15.6K with 125Mhz clock frequency.

• The Korean Journal of Applied Statistics
• /
• v.28 no.4
• /
• pp.721-739
• /
• 2015

The importance of the old age income security will increase for an aging society due to the deepening income polarization. The National Pension(NP) is a representative Social Security scheme in charge of old age income security as well as income redistribution for the insured. Studies by Kim (2002), Kim et al. (2003), and Hong (2013) have reported the possibility of unsatisfactory income redistribution of the NP. Recently Choi (2015) attributed those results to an unnoticed defect in the benefit formula. This study is a test for the unsatisfactory income redistribution of the current National Pension using early participants who have now become pensioners. The method aggregates cohorts and combines individual history data before the year 2013 and the results of the actuarial projection model of the 2013 after the year 2014. The results are divided by measures taken. The redistribution is obviously progressive by the income replacement rate; however, it is significantly regressive when measured by the net benefit theoretically as more plausible. Considering the effect of differing lifetime contribution year among income classes, the regressive redistribution will prevail more in the future pensioners.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.224-227
• /
• 2011

In order to determine the enthalpy profile in the high temperature transpiration cooling test facility for the air-breating engine compartments, theoretical calculation and measurement for the flow of the test section are performed. The mass averaged enthalpy value determined by the heat balance and sonic throat methods is 10 MJ/kg. The centerline enthalpy value measured using the slug type copper calorimeter is 15 MJ/kg. Typically, the ratio of centerline and mass averaged enthalpy should be varies from 1.4 to 4. This facility has lower bound of enthalpy profile. It will be effective in testing of high temperature transpiration cooling.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.5 no.4
• /
• pp.64-70
• /
• 1994

the magnetic field homogeneities of the induction coils of various sizes and shapes were investigated in order to prepare for the magnetic field immunity test under the power frequency, the pulse and the damed oscillatory fields recommended by the IEC. For this purpose, we analyzed the magnetic field homogeneities in the two induction coils with $1m\times1m$, and $1m\times2.6m$, , and the double square coils with 0.8m and 0.6m spaced. The testing volume within $\pm$3dB in the double square coil with 0.8m spaced in twice bigger than single square coil with 1m side in the z-direction.

• Korean Journal of Computational Design and Engineering
• /
• v.15 no.2
• /
• pp.106-114
• /
• 2010

The swept volume, the region of a moving object, is applied in many fields such as valid paths for motions of tools, visualization in robot paths and interference tests for parts assembling or disjointing. The shape of a swept volume depends on an generators computed with normal vectors of an object and velocity vectors of a motion. Although free-from surfaces are widely used to represent geometric models in CAD, computing the generators for a free-form object is a formidable task. Previous approaches exploit the closed form expressions of generators but limited to planer or quadric faces. In this paper, we propose the algorithm to compute swept volumes generated by free-form objects in screw motions. For the algorithm a tracing method is applied to the computation of generators. It considers curvatures of surfaces of an object to increase the computational accuracy. We implemented our algorithm in the CATIA V.5 environment to test the validity of our algorithm and to generate examples.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.5 no.5
• /
• pp.123-131
• /
• 1997

To ensure drive's field of view, obstruction area generated by a steering wheel, hub and spoke must be considered at the early stage of automobile design. The current approach to computing obstruction area proposed by SAE is based on 2D drafting procedures so that it is not precise and errorprone. In the paper we discuss the novel approach which models the obstruction area as the shadows of the steering wheel, hub and spoke by assuming the human eye as light sources. The approach is based on ray tracing and space transformations for that it can be applied when free form curves are hired to represent the steering wheel, hub and spoke in CAD environment. As a result, it gives more predise and reliable results than SAE approach.