• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.76-76
• /
• 2004

하이브리드 복합재료 중에서 적충형태의 Al/GFRP는 단일재 알루미늄에 비해 피로특성, 비강도, 비강성 등이 매우 우수하여 Fig. 1과 같이 항공기 주익 구조에 주로 적용된다. 그러나 이러한 Al/GFRP 적층재 역시 장시간에 걸쳐 비행하중을 받게 되면 다양한 형태의 파손이 발생할 수 있다. 이 중 알루미늄층과 섬유층 사이에서 발생하는 층간분리는 Al/GFRP 적층재의 대표적인 피로파손 형태이며, 현재 이러한 파손은 다 방면으로 연구되고 있다.(중략)

• The tire
• /
• s.228
• /
• pp.30-33
• /
• 2006

우리나라는 세계5위의 타이어생산국으로 국내 타이어시장은 2010년까지 생산과 수요는 증가할 것이지만 성장률은 연평균3% 이내로 정체될 전망이다. 세계 타이어시장 성장률도 3% 수준에서 정체될 것으로 보이는 상황에서 천연고무 가격급등, 유가인상 등으로 경영환경이 악화되고 있으며 , 이를 극복하기 위해 국내외 타이어업체들은 마진율이 높은 고부가타이어의 매출비중을 적극적으로 확대하고 있는 상황이다. 세계 타이어시장은 상위 12개 업체가 과점하고 있으며, 같은 성능과 품질이라도 브랜드파워와 판매네트워크의 차이로 뚜렷한 가격 차이를 보이고 있다. UHPT의 경우 국내업체제품은 선진업체에 비해 40% 할인된 가격에 판매되지만 , 일반타이어를 중심으로 가격차이가 2010년까지 15% 이내로 좁혀질 전망이다.

• The Korea Swine Journal
• /
• v.23 no.9 s.265
• /
• pp.87-91
• /
• 2001

국내 돼지 인공수정은 1994년 이후 보급이 급속히 확산 되면서 1994년 보급률 $3\%$, AI센타수 5개소 이던 것이 현재는 보급률 50-60$\%$, AI센타수 60여개소로 최근 양돈관련 산업중 가장 성장한 산업중의 하나이며 중요한 양돈관련 업종의 하나로 자리 매김을 하였다. 그러나 그동안의 돼지 인공수정은 양적성장에 치중하여 왔고 최근에는 무분별한 납립으로 인한 과당경쟁과 불공평경쟁으로 인한 어려움으로 품질저하, 재투자 및 기술투자 의욕상실 등 국내 돼지인공수정은 뿌리를 든든히 내리기도 전에 성장이냐 쇄락이냐의 기로에서 위기상황을 맡고 있다. 따라서 이대로 방치 할 경우 기껏 양돈선진국 수준으로 올라선 인공수정산업이 보급률의 저하 등 산업 발전의 후퇴를 가져올 것으로 우려 된다. 이에 돼지 인공수정산업 각 부분별 문제점과 대안을 제시 하고자 한다.

• The Optical Journal
• /
• s.104
• /
• pp.23-25
• /
• 2006

프린터 시장은 삼성과 HP가 전체 시장의 60% 이상 과점상태를 보이고 있지만 후발업체들이 추격을 강화하는 가운데, 전체 시장은 소폭의 성장과 함께 가격하락세를 보이고 있다. 지난해 프린터 시장은 잉크젯에서 컬러 레이저로, 프린터 단품에서 복합기로의 변화를 거듭했다. 지금까지 프린터 시장을 주도해왔던 잉크젯 단품 제품은 지난해 정점을 찍으면서 앞으로 점차 수요가 감소하고 이 자리를 컬러 레이저와 복합기가 차지할 것으로 보인다.이런 전망에 확신을 실어주듯 지난해 컬러레이저 시장은 성장성이 높은 시장으로 떠오르며 시장경쟁이 가장 치열했다. 또한 향후에는 컬러 레이저 제품이 급속도로 성장할 것으로 전망되며, 복사기 및 프린터 업체들이 공통으로 기업용 솔루션 관련 시장을 본격 공략하며 치열한 경쟁관계를 형성할 것으로 보인다.

• Journal of Life Science
• /
• v.2 no.1
• /
• pp.26-34
• /
• 1992

유전자 재조합 균주의 발효에 있어서 플라스미드의 안정성과 발효공정의 최적화에 대해 개략적으로 서술하였다. 클론된 DNA의 발현은 플라스미드의 안정성을 크게 저해하며, 저하된 플라스미드의 안정성은 재조합 균주의 생산성을 많이 떨어뜨린다. 최적 발효 조건은 각각의 숙주-벡터 시스템, 사용한 배지, 생성물 등에 따라 크게 변한다. 동일한 숙주-벡터 시스템의 경우도, 사용하는 배지에 따라 온도, 희석률 또는 성장속도에 의존하는 정도가 달라지고 또 최적값도 다 변한다. 또한 발효조건의 최적화가 균체 내 플라스미드의 자기복제,mRNA로의 전사, 단백질로의 translation, 더 나아가 미생물 전체의 생리와 밀접하게 관련이 있다.

• Journal of Technology Innovation
• /
• v.18 no.2
• /
• pp.91-120
• /
• 2010

This paper examines the effect of bargaining power over intermediate goods prices on innovation and economic growth using a Schumpeterian growth model. The notion of "intermediate goods prices" broadly indicates the reward to innovators including innovative SMEs as well as intermediate goods producers that are vertically integrated to big businesses. From this viewpoint, this paper sets up a Schumpeterian growth model that incorporates the market power between final goods producers and intermediate goods producers. The results show that the reduction of intermediate goods prices slows down long-run growth rates as it erodes the reward to innovations. Lower intermediate goods prices decrease marginal productivity of capital and real interest rates. However, the harmful effect of lower profits on innovations outweighs the beneficial effect of lower interest rates. Simulations using Korea's data for various cases show that in all cases the policies that raise the share of intermediate goods producers are as powerful as the R&D subsidy policies in raising growth rates. Therefore, fair trade policies that enable intermediate goods producers-especially SMEs to obtain more fruits of innovations will be helpful for long-run economic growth.

• Journal of Technology Innovation
• /
• v.31 no.1
• /
• pp.105-148
• /
• 2023

This paper provides a new method of measuring the degree of technological progress which contributes to real economic growth based on Schumpeter's Trilogy. Using Microdata of Statistics Korea, the results of measuring and comparing the actual growth contribution of technological progress during the period 2003-2018 by the total factor productivity growth rate(growth accounting method), the R&D investment contribution rate, and the Schumpeterian innovation growth rate, respectively are as follows. First, the measurement of the real growth contribution of technological progress by the growth rate of total factor productivity and the growth rate of Schumpeterian innovation shows contradictory results. Second, when the growth rate of production is in a decreasing trend, the difference between the growth rate of production and the growth rate of total factor productivity increases compared to when it is in an increasing trend. Conversely, when there is an increasing trend, the difference between the growth rate of production and the growth rate of total factor productivity becomes smaller compared to when it is in a decreasing trend.. Third, the technological opportunity that affects the innovation growth rate, i.e., the contribution of R&D incentives to innovative growth is only 3.3%. The reason why this result is different from the existing perception of the contribution of technological progress to growth is that different entities are being measured while measuring the same term of technological progress. Therefore, the growth rate of total factor productivity should be used to measure macroeconomic efficiency, R&D investment should be used to measure the effectiveness of new technology supply, and the Schumpeterian innovation rate should be used to measure the economic impact of technological progress. The policy implications of the research results of this thesis are as follows: ① Transition from a policy of one-sided technology supply to a policy of convergence of technology supply and new technology demand support, ② Mission-oriented R&D policy and R&D policy that links national R&D with private R&D, ③ Reclassification of capital goods reflecting the degree of new knowledge.

• Journal of the Korea Concrete Institute
• /
• v.16 no.3 s.81
• /
• pp.311-318
• /
• 2004

This study was performed to examine engineering properties for planting of porous concrete block containing rice straw ash. Tests for void ratio, compressive and flexural strength, pH by neutralization treatment time and curing method were peformed. As results, the void ratio tends to decrease with increasing rice straw ash content. But, the compressive and flexural strength tends to increase with Increasing rice straw ash content. When the neutralization was treated at the curing age 6 days, the greatest strength was showed. The pH of porous concrete without neutralization treatment in dry and water curing are shown in 10.32 ${\~}$ 10.55 and 9.41${\~}$9.59, respectively. The pH of porous concrete by neutralization treatment in dry and water curing were shown in 9.74${\~}$10.10 and 8.13${\~}$9.32, respectively. The porous concrete block size was 23 ${\times}$ 23 ${\times}$ 4 cm, and species of planting were Tall fescue, Lespedeza cyrtobotrya and Lespedeza cuneata. At the 6 months after seeding, germination ratio and grown-up length of Tall fescue, Lespedeza cyrtobotrya and Lespedeza cuneata were shown in 90, 60, $50\%$, and 40${\~}$50, 90${\~}$110, 65${\~}$75 cm, respectively. These porous concrete block containing rice straw ash could be used for planting.

• The Journal of Engineering Geology
• /
• v.23 no.2
• /
• pp.161-170
• /
• 2013

We analyzed the effect of changing water level and turbidity on plants that serve to maintain slope stability on levees. In this experiment, soil collected from upstream of Imha Dam was placed in a water tank and planted with river plants of the Salix species: Salix gracilistyla, S. koreensis, and S. glanduosa. Plant regrowth was analyzed stage-by-stage during a recovery period. In addition, we assessed the tolerance of the plants to concentrated torrential rainfall and examined their recovery rates. The results indicate that in the case of these three Salix species, which are the most prevalent river plants in Korea, stem growth is arrested following serious damage and high turbidity. The possibility of regrowth was very low during the 20-day non-submerged recovery period. Although the number of leaves initially decreased during this period, subsequent regrowth was reasonably high: recovery in S. gracilistyla, S. koreensis, and S. glanduosa was up to 59.3%, 251.3%, and 148.4% respectively, compared with the initial condition.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.12
• /
• pp.7134-7147
• /
• 2014

This study examined one of the contemporary issues that may be interesting to academics and practitioners regarding the driving force of the growth rate for the firms belonging to the chaebols in the Korean capital markets. With respect to the empirical results obtained from two hypothesis tests, the first hypothesis was to identify any financial determinants on the growth rate by applying both dynamic panel data and static panel data models. The debt ratios relevant to the book- and market-value showed their positive relationships with the DV of GROWTH1, along with other significant IDVs such as one-period lagged DV of GROWTH_1, SIZE1 and FOS with statistical significance. Second, by employing conditional quantile regression (CQR) analysis, the control variables, such as ROA, SMARKET, time dummy variable of F2010 and F2011, and the industry dummies of IND3 and IND10, provided evidence of their significant influences on DV of GROWTH1.